

Servo Motor Shield v1
- Size
- 160 × 101.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 126
- Nets
- 90
- Pads
- 366
- Tracks, vias
- 391, 152
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 29 Jan 2026
- Updated
- 22 Mar 2026
Overview
Servo Motor Shield v1 is an open-source printed circuit board by MilosSubotic, from the MilosSubotic/OSuRV_2025 repository on GitHub, published under the MIT licence. It is a 2-layer board of 160 × 101.6 mm with 126 parts on 90 nets, routed with 391 tracks and 152 vias.
It is built around the BT139-600E, LM324 and CD4051BE, with the CD4094DN, IRF4905 and BZX55C5V1-TR among its other parts. Its parts include 49 resistors, 17 connectors, 13 capacitors, 6 transistors and 5 diodes. It belongs with the robots and motor control boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
6BT139-600E
TO-220C-40℃~+125℃ 1 TRIAC 1.5V 10mA 140A@20ms 16A 1V 25mA 500mW 600V TO-220C Thyristors (SCR)/Modules ROHSKTPThyristors (SCR)/ModulesLM324
SOP-14-1.5V~10V 0℃~+70℃ 24V 250nA 3V~20V 4 40mA 50nA 700uA 7mV 80dB SOP-14 Operational Amplifier ROHSHXY MOSFETOperational AmplifierCD4051BE
PDIP-16-55℃~+125℃ 125Ω 20MHz 3V~20V 450ns 8 8:1 PDIP-16 Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, MultiplexersCD4094DN
DIP-16-20℃~+85℃ 135ns@15V,50pF 3V~15V 4000B Series 6MHz 8 Serial-to-Parallel Tri-State DIP-16 Shift Registers ROHSHGSEMIShift RegistersIRF4905
TO-220-35℃~+175℃ 1 P-Channel 12nF 150nC@10V 1nF 2.5V 200W 450pF 60V 75A 9mΩ P-Channel TO-220 MOSFETs ROHSCmosMOSFETsBZX55C5V1-TR
DO-35(DO-204AH)1 Independent 100nA@1V 35Ω 4.8V~5.4V 5.1V 500mW 550Ω DO-35(DO-204AH) Zener Diodes ROHSVishay IntertechnologyZener Diodes
Parts
126| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1x4 2.54mm male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4, J5, J6, J7, J9, J10, J12, J13, J16 |
| 8 | 100k | For_Rasterboard:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R8, R11, R13, R22, R24, R36, R38 |
| 8 | 1k | Potentiometer_THT:Potentiometer_Piher_PT-10-V10_Vertical | RV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8 |
| 8 | 1x2 2.54mm male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP3, JP4, JP5, JP8, JP9, JP12, JP13, JP16 |
| 5 | IRF4905 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3, Q4, Q5 |
| 5 | M3 hole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5 |
| 4 | 0.1 | For_Rasterboard:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R12, R23, R37 |
| 4 | 0.1A Polyfuse | For_Rasterboard:C_Disc_D3.0mm_W1.6mm_P5.00mm | F2, F3, F4, F5 |
| 4 | 100k | For_Rasterboard:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R6, R18, R32, R43 |
| 4 | 10M | For_Rasterboard:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R7, R10, R21, R35 |
| 4 | 10k | For_Rasterboard:R_Axial_DIN0207_L6.3mm_D2.5mm_P17.78mm_Horizontal | R14, R25, R28, R39 |
| 4 | 10k | For_Rasterboard:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R16, R27, R41 |
| 4 | 10k | For_Rasterboard:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R4, R15, R26, R40 |
| 4 | 10k | For_Rasterboard:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R17, R29, R31, R42 |
| 4 | 10n | For_Rasterboard:C_Disc_D3.0mm_W1.6mm_P2.50mm | C5, C7, C9, C11 |
| 4 | 1k | For_Rasterboard:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R19, R30, R33, R44 |
| 4 | 1k | For_Rasterboard:R_Axial_DIN0207_L6.3mm_D2.5mm_P12.70mm_Horizontal | R1, R9, R20, R34 |
| 4 | 1x1 2.54mm male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2, J3, J8, J11 |
| 4 | 470U 10V | Capacitor_THT:CP_Radial_D10.0mm_P2.50mm | C6, C8, C10, C12 |
| 4 | Jumper_4_Bridged12 | Extra_Common:Jumper4_PinHeader_1x04_P2.54mm_Vertical | JP2, JP7, JP11, JP15 |
| 2 | 100n | Capacitor_SMD:C_1206_3216Metric | C3, C4 |
| 2 | 100n | For_Rasterboard:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2 |
| 2 | 330 | For_Rasterboard:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R47, R49 |
| 2 | LM324 | Package_DIP:DIP-14_W7.62mm | U1, U5 |
| 1 | 100 | For_Rasterboard:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R45 |
| 1 | 100n | For_Rasterboard:C_Disc_D3.0mm_W1.6mm_P5.00mm | C13 |
| 1 | 1x10 2.54mm male | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1 |
| 1 | 1x3 2.54mm female | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J17 |
| 1 | 330 | For_Rasterboard:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R46 |
| 1 | 330 | For_Rasterboard:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R48 |
| 1 | 4A Polyfuse | For_Rasterboard:C_Disc_D3.0mm_W1.6mm_P5.00mm | F1 |
| 1 | Arduino_UNO_R2 | Local:Arduino_UNO_R3_WithMountingHoles_Snapped_to_P2.54mm_Custom_Cutted_Pins | A1 |
| 1 | BT139-600 | Package_TO_SOT_THT:TO-220-3_Vertical | Q6 |
| 1 | BZX55C-5V1 | For_Rasterboard:D_DO-35_SOD27_P2.54mm_Vertical_KathodeUp | D1 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J14 |
| 1 | Black Large | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1 |
| 1 | Blue | LED_THT:LED_D3.0mm | D5 |
| 1 | CD4051B | Package_DIP:DIP-16_W7.62mm | U3 |
| 1 | CD4094 | Package_DIP:DIP-16_W7.62mm | U2 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J15 |
| 1 | Green | LED_THT:LED_D3.0mm | D2 |
| 1 | Red | LED_THT:LED_D3.0mm | D3 |
| 1 | Yellow | LED_THT:LED_D3.0mm | D4 |
More from MilosSubotic/OSuRV_2025
2- 2 layers68.6 × 33 mm

- 2 layers81.3 × 68.6 mm

Similar boards
- 2 layers300 × 53 mm

BMW E30 Late Cluster SI
Ansel84/BMW-E30-Gauge-Cluster-Late-Model
This project is the documentation of reverse engineering the BMW E30 gauge cluster for post 1988 model years.
118 parts2MIT - 2 layers163 × 130 mm

- 2 layers100 × 100 mm

BulkyMIDI-32 Channel
tebl/BulkyMIDI-32
A HW build of the MT32-PI project, allowing you to emulate a Roland MT-32 using a Raspberry Pi. Includes enough additional modules to build a MIDI-mountain as well as adapters for connecting to most things retro.
122 parts80CC-BY-SA-4.0 - 2 layers176.3 × 101.6 mm

- 4 layers163 × 116.5 mm

- 2 layers83.8 × 40.1 mm

- 2 layers

- 2 layers59 × 99 mm

XJ H01
adnksharp/aks-arduino-module-sensors-shield
Shield para modulos de sensores de Arduino a Cajas de contacto
22 partsGPL-3.0
Questions
How big is the Servo Motor Shield v1 PCB?
It measures 160 × 101.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Servo Motor Shield v1 use?
126 parts, built around the BT139-600E, LM324, CD4051BE and CD4094DN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Servo Motor Shield v1 KiCad files?
From the MilosSubotic/OSuRV_2025 repository on GitHub, at the commit this page was made from: the board is RC_Tank/Tank/vezba06_kernel_space/HW/Servo_Motor_Shield_v1/Servo_Motor_Shield_v1.kicad_pcb and its schematic Car/HW/Arduino_Automotive_Ultrasound_Shield_v1/Arduino_Automotive_Ultrasound_Shield_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Servo Motor Shield v1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).