

8-bit computer ALU
My 8-bit computer
- Size
- 99.1 × 87.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 80
- Pads
- 262
- Tracks, vias
- 777, 11
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 17 Feb 2020
- Updated
- 17 Jun 2025
Overview
8-bit computer ALU is an open-source printed circuit board by xrayer2000, from the xrayer2000/8-bit-computer-Documentation repository on GitHub. It is a 2-layer board of 99.1 × 87.6 mm with 50 parts on 80 nets, routed with 777 tracks and 11 vias.
It is built around the 74HCT245, 74F382SC and 74HCT157D, with the 74HCT04D, 74HCT173D and 74HCT377D among its other parts. Its parts include 12 resistors, 11 capacitors, 9 ICs, 8 diodes and 3 connectors. It belongs with the retro computing and games boards of this library.
Main components
674HCT245
DIP-20-40℃~+85℃ 28ns@4.5V 4.5V~5.5V 6mA 6mA 74HCT 8 8uA Bidirectional TTL-compatible CMOS Tri-State DIP-20 Buffers, Drivers, Receivers, Transceivers ROHSWuxi I-core Elec74 Series74F382SC
SOIC-200℃~+70℃ 4 4.5V~5.5V ALU SOIC-20 Specialty Logic ROHSonsemiSpecialty Logic74HCT157D
SO-16-40℃~+125℃ 160uA 16ns@4.5V,50pF 4.5V~5.5V 4mA 4mA 74HCT 8/4 Multiplexer Single Supply SOIC-16 Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches, Multiplexers, Decoders74HCT04D
SO-14-40℃~+125℃ 1 19ns@4.5V,50pF 2V 2uA 3.7V 4.5V~5.5V 400mV 4mA 4mA 6 74HCT 800mV SO-14 Inverters ROHSNexperiaInverters74HCT173D
SOP-16-40℃~+125℃ 0ns 12ns 20ns@4.5V,50pF 3.5pF 4 4 4.5V~5.5V 6mA 6mA 74HCT Series 80MHz 8uA Asynchronous D-Type Reset Rising Edge Tri-State SOP-16 Flip Flops ROHSNexperiaFlip Flops74HCT377D
SO-20-300mil-40℃~+125℃ 1 2ns 3.5pF 32ns@4.5V,50pF 4.5V~5.5V 4mA 4ns 5.2mA 53MHz 74HCT Series 8 8uA D-Type Enable Rising Edge Synchronous SO-20-300mil Flip Flops ROHSNexperiaFlip Flops
README
README.mdLICENSE
README
This project is licensed under the Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).
You are free to:
- Share (copy and redistribute the material in any medium or format)
- Adapt (remix, transform, and build upon the material)
Under the conditions that:
- You must give appropriate credit.
- You may not use the material for commercial purposes.
For full license details, see:
https://creativecommons.org/licenses/by-nc/4.0/
Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)
Copyright (c) 2025 Emil
You are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material
Under the following terms:
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made.
- NonCommercial — You may not use the material for commercial purposes.
No additional restrictions — You may not apply legal terms or technological measures that restrict others from doing anything the license permits.
Full license text:
https://creativecommons.org/licenses/by-nc/4.0/legalcode
How to attribute
If you use or adapt this project, please include the following attribution:
“Project name” by Emil is licensed under CC BY-NC 4.0.
https://creativecommons.org/licenses/by-nc/4.0/
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C2, C3, C4, C5, C6, C7, C8, C9, C10 |
| 8 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7, D8 |
| 4 | 220 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R9, R10, R11, R12 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 2 | 74F382 | Package_DIP:DIP-20_W7.62mm | U7, U8 |
| 2 | 74HCT157 | Package_DIP:DIP-16_W7.62mm | U4, U5 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C1 |
| 1 | 4078 | Package_DIP:DIP-14_W7.62mm | U9 |
| 1 | 74HCT04 | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | 74HCT173 | Package_DIP:DIP-16_W7.62mm | U10 |
| 1 | 74HCT245 | Package_DIP:DIP-20_W7.62mm | U6 |
| 1 | 74HCT377 | Package_DIP:DIP-20_W7.62mm | U3 |
| 1 | B-Register | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J2 |
| 1 | Buss | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J3 |
| 1 | C | LED_THT:LED_D3.0mm | C11 |
| 1 | Control Signals | Connector_IDC:IDC-Header_2x07_P2.54mm_Vertical | J1 |
| 1 | N | LED_THT:LED_D3.0mm | N1 |
| 1 | V | LED_THT:LED_D3.0mm | V1 |
| 1 | Z | LED_THT:LED_D3.0mm | Z1 |
More from xrayer2000/8-bit-computer-Documentation
7- 2 layers

- 2 layers101.6 × 101.3 mm

8-bit computer General Registers pcb
xrayer2000/8-bit-computer-Documentation
My 8-bit computer
75 parts30 - 2 layers100.1 × 97 mm

- 2 layers100.4 × 100.8 mm

8-bit computer Keypad Module Right
xrayer2000/8-bit-computer-Documentation
My 8-bit computer
52 parts30 - 2 layers93.1 × 92.5 mm

- 2 layers100.3 × 95.3 mm

- 2 layers87.6 × 52.6 mm

Similar boards
- 2 layers297.2 × 180.3 mm

- 4 layers244.5 × 393.4 mm

- 2 layers167.8 × 200.6 mm

Random Jazz Generator
telec16/modular-synth
Little side project, don't expect much updates.
132 parts16 - 2 layers235 × 158.8 mm

Gigatron
flypie/Gigatron
This is a version of the files from https://gigatron.io/ altered to work on a vanilla KiCAD 5.1.6. Changes are minimal in the schematic and PCB, layout has only been changed where dimensions or orientations changed as a…
151 parts2 - 2 layers102 × 96 mm

- 2 layers368.3 × 215.9 mm

- 4 layers200 × 50 mm

- 4 layers280 × 140 mm

P8x alu card
ksr/p8x
Generated by generators/genkicad.py from the canonical geneagle netlist (CARDS["peripheral-card"]), same standard as the memory card: 4-layer (F/B signals, In1=GND, In2=VCC planes), a bypass cap above each IC, a…
77 parts
Questions
How big is the 8-bit computer ALU PCB?
It measures 99.1 × 87.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 8-bit computer ALU use?
50 parts, built around the 74HCT245, 74F382SC, 74HCT157D and 74HCT04D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 8-bit computer ALU KiCad files?
From the xrayer2000/8-bit-computer-Documentation repository on GitHub, at the commit this page was made from: the board is Kicad/8-bit-computer/8-bit-computer_ALU/8-bit-computer_ALU.kicad_pcb and its schematic Kicad/8-bit-computer/8-bit computer_Boot_loader/8-bit computer_Boot_loader.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 8-bit computer ALU design in my own project?
Its repository states no licence, so its author keeps all rights: ask xrayer2000 before reusing the design.