

Relaymodule
- Size
- 47.8 × 23.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 15
- Pads
- 37
- Tracks, vias
- 38, 5
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 11 Oct 2022
- Updated
- 11 Oct 2022
Overview
Relaymodule is an open-source printed circuit board by xLordiz3, from the xLordiz3/PCBs repository on GitHub. It is a 2-layer board of 47.8 × 23.9 mm with 14 parts on 15 nets, routed with 38 tracks and 5 vias.
It is built around the S8550. Its parts include 5 resistors, 3 diodes, 2 connectors, 1 IC and 1 transistor.
Main components
1Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2 |
| 1 | 12V Relay | Relay_THT:Relay_SPDT_Finder_36.11 | K1 |
| 1 | D | Diode_SMD:D_MicroMELF_Handsoldering | D3 |
| 1 | High/Low Jumper | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | Inputs | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J1 |
| 1 | Octocupler | Package_SO:MFSOP6-4_4.4x3.6mm_P1.27mm | U1 |
| 1 | Outputs | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J2 |
| 1 | S8550 | Package_TO_SOT_SMD:SOT-23 | Q1 |
More from xLordiz3/PCBs
12- 2 layers93.2 × 59.2 mm

- 2 layers

- 2 layers88.9 × 82.6 mm

- 2 layers65.4 × 66.8 mm

- 2 layers64.1 × 58.2 mm

- 2 layers64.8 × 49.5 mm

- 2 layers75.1 × 49.2 mm

- 2 layers91 × 96.6 mm

- 2 layers33.2 × 23 mm

- 2 layers111.5 × 93.7 mm

- 2 layers36.5 × 31.3 mm

- 2 layers55.9 × 47 mm

Similar boards
- 2 layers128 × 77 mm

- 2 layers

IEC-62056-21-Optical Probe
twam/IEC-62056-21-Optical-Probe
Optical-Probe for reading out power meters supporting IEC 62056-21 via USB
38 parts33 - 2 layers60 × 40 mm

Forcegauge
szbeni/forcegauge
Traning for climbing. Load cell with HX711 and real time plotting,
77 parts18GPL-3.0 - 2 layers60 × 40 mm

Touch n drink
zargony/touch-n-drink
Hardware and firmware for cashless payment device for cold drinks at the aeroclub at EDLH
13 parts14EUPL-1.2 - 2 layers71.1 × 50.8 mm

Power supply and amplifier
roybaer/sound_source
Design documents for Disney Sound Source (DSS) compatible hardware
34 parts9 - 2 layers121 × 75.5 mm

Jlctest
cjheath/jlcbasic
JLC Basic parts library for Kicad fetched and converted from EasyEDA
46 parts5 - 2 layers81.2 × 40 mm

Single scale v3 kicad
IoTReady/esp32-wifi-ble-weighing-scale
This is a weighing scale designed to share data over Wi-Fi using esp32 WROOM32 module. For the weighing scale we are using a load cell and measuring the output using a HX711 24-bit ADC designed for weigh scales and…
59 parts5 - 2 layers54.6 × 34.9 mm

Doc
potato1992/PCSwitchPi
Control PC power buttons (power/reset/force power down) using a raspberry pi through Web interface
15 parts5Apache-2.0
Questions
How big is the Relaymodule PCB?
It measures 47.8 × 23.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Relaymodule use?
14 parts, built around the S8550. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Relaymodule KiCad files?
From the xLordiz3/PCBs repository on GitHub, at the commit this page was made from: the board is relaymodule/relaymodule.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Relaymodule design in my own project?
Its repository states no licence, so its author keeps all rights: ask xLordiz3 before reusing the design.