Skip to the content
2 layers298.6 × 102.7 mmXk42, the printed circuit board in 3D

split keyboard with splay, high stagger and 42 keys

Size
298.6 × 102.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
110
Nets
100
Pads
542
Tracks, vias
795, 83
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
7 Mar 2026
Updated
7 Mar 2026

Overview

Xk42 is an open-source printed circuit board by xkonni, from the xkonni/xk42 repository on GitHub. It is a 2-layer board of 298.6 × 102.7 mm with 110 parts on 100 nets, routed with 795 tracks and 83 vias.

It is built around the 1N4148WL, 1N4148W RH and SK6812MINI-RV. Its parts include 46 diodes, 46 switches, 4 connectors and 2 ICs. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.

Main components

3

Parts

110
QtyValueFootprintReferences
211N4148W_LDiode_SMD:D_SOD-123D1, D2, D3, D4, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21 +5
211N4148W_RDiode_SMD:D_SOD-123D22, D23, D24, D25, D26, D27, D28, D29, D30, D31, D32, D33, D34, D35, D36, D37 +5
211u_LSwitch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_Choc_V1V2_1.00uSW1, SW2, SW3, SW4, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21 +5
211u_RSwitch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_Choc_V1V2_1.00uSW24, SW25, SW26, SW27, SW28, SW29, SW30, SW31, SW32, SW33, SW34, SW35, SW36, SW37, SW38, SW39 +5
6Screw_M2_TH_LMountingHole:MountingHole_2.2mm_M2TH1, TH2, TH3, TH4, TH5, TH11
6Screw_M2_TH_RMountingHole:MountingHole_2.2mm_M2TH6, TH7, TH8, TH9, TH10, TH12
2SK6812MINI_LLED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mmD43, D44
2SK6812MINI_RLED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mmD45, D46
1BOOT_Pin_LButton_Switch_SMD:SW_SPST_TL3342SW22
1BOOT_Pin_RButton_Switch_SMD:SW_SPST_TL3342SW46
1Battery_LConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2
1Battery_RConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ3
1DIP_LButton_Switch_SMD:SW_SPDT_PCM12SW23
1DIP_RButton_Switch_SMD:SW_SPDT_PCM12SW45
1OLED/E-Ink_LConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ1
1OLED/E-Ink_RConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ4
1nice_nano_Lnice-nano:nice_nanoU1
1nice_nano_Rnice-nano:nice_nanoU2

Similar boards

  • 2 layers276.5 × 91.6 mmCorne chocoflan, the printed circuit board in 3D

    Corne chocoflan

    Julian-Banks/Corne_choc

    My Corne V4 Choc build

    118 parts
  • 2 layers72 × 121 mmTeebeutel, the printed circuit board in 3D

    Teebeutel

    entropia/Teebeutel-Hardware

    Teebeutel (eng. Teabag) is an electronic, Entropia themed con-badge for the GPN20, featuring an ESP32 microprocessor running micropython.

    201 parts1
  • 2 layers77 × 88 mmThumb right pcb, the printed circuit board in 3D

    Thumb right pcb

    fritzk/kinesis-rgb-pcbs

    Kinesis Advantage thumb clusters with sk6812 mini-e leds

    33 partsCERN-OHL-P-2.0
  • 2 layers98 × 98 mmMaglock, the printed circuit board in 3D

    Maglock

    makerspacelt/maglock-hw

    MagLock is the entrance controller hardware. It features:

    221 parts
  • 2 layers100 × 50 mmWiscale, the printed circuit board in 3D

    Wiscale

    makerspacelt/wiscale-hw

    This is ESP8266 (ESP-12F) and HX711 based weight monitoring device.

    118 parts
  • 2 layers228.6 × 79.4 mmTzarc keyboards ghoul, the printed circuit board in 3D

    Tzarc keyboards ghoul

    punkfab/pcb-corpus

    235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark

    191 parts1
  • 2 layers130 × 169.5 mmBsl array v1, the printed circuit board in 3D

    Bsl array v1

    jackw01/scanlight

    A better light source for scanning color negative film

    110 parts397CERN-OHL-W-2.0

Questions

How big is the Xk42 PCB?

It measures 298.6 × 102.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Xk42 use?

110 parts, built around the 1N4148WL, 1N4148W RH and SK6812MINI-RV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Xk42 KiCad files?

From the xkonni/xk42 repository on GitHub, at the commit this page was made from: the board is kicad/xk42.kicad_pcb and its schematic kicad/xk42.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Xk42 design in my own project?

Its repository states no licence, so its author keeps all rights: ask xkonni before reusing the design.