4 layers52 × 39 mm
Motherboard
xjjak/LapCal
Building gloves that enable typing on a 34-key keyboard without an actual physical keyboard using IMUs and machine learning.
58 parts3
4 layers57.3 × 41.4 mm
Panel sensor
xjjak/LapCal3Building gloves that enable typing on a 34-key keyboard without an actual physical keyboard using IMUs and machine learning.
- Size
- 57.3 × 41.4 mm
- Copper layers
- 4
- Thickness
- 1 mm
- Parts
- 168
- Nets
- 72
- Pads
- 378
- Tracks, vias
- 354, 102
- Pours
- 18
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 2 Nov 2023
- Updated
- 22 Jul 2025
Overview
Panel sensor is an open-source printed circuit board by xjjak, from the xjjak/LapCal repository on GitHub. It is a 4-layer board of 57.3 × 41.4 mm with 168 parts on 72 nets, routed with 354 tracks and 102 vias.
It is built around the MPU-6050 and SM04B-SRSS-TB(LF)(SN). Its parts include 24 capacitors, 18 resistors, 6 ICs, 6 diodes and 6 connectors. It belongs with the sensors and measurement boards of this library.
Main components
2
MPU-6050
QFN-24-EP(4x4)-40℃~+85℃ 16bit 1KB 2.375V~3.46V 5uA Accelerometer Gyroscope I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(4x4) Accelerometers ROHSTDK InvenSenseAccelerometers
SM04B-SRSS-TB(LF)(SN)
SMD,P=1mm,卧贴-25℃~+85℃ 1 1A 1mm 1x4P 2.9mm 4 4.32mm 4P 50V 6mm Auxiliary Solder Pin Copper alloy PA SH Surface Mount, Right Angle Tin UL94V-0 White SMD,P=1mm,卧贴 Wire To Board Connector ROHSJSTWire To Board Connector
Parts
168| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C1, C1, C1, C1, C1, C2, C2, C2, C2, C2, C2 |
| 12 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R2, R2, R2, R2, R2, R3, R3, R3, R3, R3, R3 |
| 12 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H1, H1, H1, H1, H1, H2, H2, H2, H2, H2, H2 |
| 6 | 10nF | Capacitor_SMD:C_0603_1608Metric | C4, C4, C4, C4, C4, C4 |
| 6 | 2.2nF | Capacitor_SMD:C_0603_1608Metric | C3, C3, C3, C3, C3, C3 |
| 6 | 2k | Resistor_SMD:R_0603_1608Metric | R1, R1, R1, R1, R1, R1 |
| 6 | Blue | LED_SMD:LED_0603_1608Metric | D1, D1, D1, D1, D1, D1 |
| 6 | LOGO | xi-logo:xi-logo | G***, G***, G***, G***, G***, G*** |
| 6 | MPU-6050 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U1, U1, U1, U1, U1, U1 |
| 6 | SM04B-SRSS-TB(LF)(SN) | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J1, J1, J1, J1, J1, J1 |
The 78 most common of 168 parts.
Questions
How big is the Panel sensor PCB?
It measures 57.3 × 41.4 mm and has 4 copper layers, 1 mm thick.
What parts does the Panel sensor use?
168 parts, built around the MPU-6050 and SM04B-SRSS-TB(LF)(SN). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panel sensor KiCad files?
From the xjjak/LapCal repository on GitHub, at the commit this page was made from: the board is Hardware/Electronics/SensorUnit/sensor/panel_sensor.kicad_pcb and its schematic Hardware/Electronics/SensorUnit/sensor/sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panel sensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask xjjak before reusing the design.
More from xjjak/LapCal
3- 4 layers9.2 × 6.5 mm
Motherboard.sync conflict-20230317-211825-LKIFFR5
xjjak/LapCal
Building gloves that enable typing on a 34-key keyboard without an actual physical keyboard using IMUs and machine learning.
47 parts3 - 4 layers12.4 × 19.7 mm
Sensor
xjjak/LapCal
Building gloves that enable typing on a 34-key keyboard without an actual physical keyboard using IMUs and machine learning.
13 parts3
Similar boards
- 2 layers90.5 × 50 mm
Main control board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
42 parts1.1k - 8 layers100.2 × 55 mm
Jetson nano baseboard
antmicro/jetson-nano-baseboard
Antmicro's open hardware baseboard for the NVIDIA Jetson Nano, TX2 NX and Xavier NX
391 parts548Apache-2.0 - 2 layers89.2 × 82.6 mm
Desktop 50 Pin TopConn
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350
108 parts459GPL-3.0 - 8 layers120 × 60 mm
Jetson orin baseboard
antmicro/jetson-orin-baseboard
Baseboard targetting the NVIDIA Jetson Orin Nano and Jetson Orin NX
681 parts305Apache-2.0 - 4 layers58 × 50 mm
Bldc motor cntroller
azmat-bilal/bldc_motor_controller_pcb
A Brushless DC Motor controller board. The design is inspired and is compatible with Odrive project (https://github.com/madcowswe/ODriveHardware) except that this one has a single channel.
146 parts112MIT - 4 layers68.6 × 53.3 mm
Arduino UNO R4 WiFi
sabogalc/KiCad-Arduino-Boards
A collection of Arduino boards recreated from scratch in KiCad. Legacy USB connectors have been replaced with USB-C where applicable.
262 parts95WTFPL - 2 layers51 × 18.5 mm
Entree
tuna-f1sh/entree
Entree is a USB-C CAN interface designed to fully support CANnectivity - gets the CAN party started!
78 parts89 - 6 layers37.9 × 37.9 mm
OpenFC
OpenDrone-hw/OpenFC-Lite
Open-source Betaflight flight controller. RP2354B, 30.5x30.5 mm, 6-layer, 3-8S, CERN-OHL-S-2.0.
164 parts85CERN-OHL-S-2.0