Skip to the content
2 layers76 × 64.5 mmPicoTracker, the printed circuit board in 3D

Buy the official kit at xiphonics store # Trademark Notice

Size
76 × 64.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
20
Pads
115
Tracks, vias
146, 15
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
5 Jun 2023
Updated
29 May 2026

Overview

PicoTracker is an open-source printed circuit board by xiphonics, from the xiphonics/picoTracker-pcb repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 76 × 64.5 mm with 14 parts on 20 nets, routed with 146 tracks and 15 vias.

It is built around the DF12NC(5.0)-20DP-0.5V(51). Its parts include 9 switches and 1 connector.

Main components

1

README

README.md

PCB for PicoTracker

All data in order to fabricate the PCB for the picoTracker

Buy the official kit at xiphonics store

Trademark Notice

This repository contains the open-source hardware design files for the picoTracker project.

The hardware design files are released under the CC0 1.0 Universal license and may be used, modified, manufactured, and sold without restriction.

However, the picoTracker name, logos, product branding, and associated trademarks are not covered by the CC0 license and are not licensed for use by third parties.

You may manufacture and sell hardware derived from these design files, but you may not market, advertise, label, or otherwise represent such products using the "picoTracker" name or branding without prior written permission from Xiphonics.

Products manufactured from these files must be sold under a different product name and must not imply endorsement by, affiliation with, or origin from Xiphonics.

To facilitate this separation, the manufacturing files distributed through this repository intentionally omit picoTracker branding elements.

Use of the picoTracker name in connection with unauthorized derivative hardware may constitute trademark infringement and unfair competition.

picoTrakerPCB

Parts

14
QtyValueFootprintReferences
3MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3
1ALTproject:Cherry-MX-Low-Profile-kailhSW7
1DF12NC(5.0)-20DP-0.5V(51)Connector_Hirose:Hirose_DF12_DF12E3.0-20DP-0.5V_2x10_P0.50mm_VerticalJ1
1DOWNproject:Cherry-MX-Low-Profile-kailhSW4
1EDITproject:Cherry-MX-Low-Profile-kailhSW8
1ENTERproject:Cherry-MX-Low-Profile-kailhSW9
1LEFTproject:Cherry-MX-Low-Profile-kailhSW3
1NAVproject:Cherry-MX-Low-Profile-kailhSW10
1PLAYproject:Cherry-MX-Low-Profile-kailhSW11
1RIGHTproject:Cherry-MX-Low-Profile-kailhSW5
1UPproject:Cherry-MX-Low-Profile-kailhSW6

The 13 most common of 14 parts.

More from xiphonics/picoTracker-pcb

1
  • 2 layers76 × 63.5 mmPicoTracker, the printed circuit board in 3D

    PicoTracker

    xiphonics/picoTracker-pcb

    Buy the official kit at xiphonics store # Trademark Notice

    98 parts36CC0-1.0

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the PicoTracker PCB?

It measures 76 × 64.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PicoTracker use?

14 parts, built around the DF12NC(5.0)-20DP-0.5V(51). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PicoTracker KiCad files?

From the xiphonics/picoTracker-pcb repository on GitHub, at the commit this page was made from: the board is keys/picoTracker.kicad_pcb and its schematic bezel/bezel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PicoTracker design in my own project?

Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).