2 layers157.8 × 122.4 mm
Power module
xDocka15/Bachelor_project
V návrhu DPS nejsou provedeny změny popsané v kapitole 3.5.2
58 parts
2 layers55.9 × 23.5 mm
V návrhu DPS nejsou provedeny změny popsané v kapitole 3.5.2
- Size
- 55.9 × 23.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 17
- Pads
- 51
- Tracks, vias
- 74, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Oct 2022
- Updated
- 5 Aug 2024
Overview
Sensor is an open-source printed circuit board by xDocka15, from the xDocka15/Bachelor_project repository on GitHub. It is a 2-layer board of 55.9 × 23.5 mm with 20 parts on 17 nets, routed with 74 tracks and 4 vias.
It is built around the AD8021ARZ. Its parts include 8 resistors, 6 capacitors, 2 ICs, 2 connectors and 1 diode. It belongs with the sensors and measurement boards of this library.
Main components
1README
DPS/Main_module/KiCad/README.mdV návrhu DPS nejsou provedeny změny popsané v kapitole 3.5.2
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C2, C3, C5, C6 |
| 2 | 10pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4 |
| 2 | AD8021ARZ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2 |
| 1 | |||
| 1 | 110 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | 110k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 11k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 3k6 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8 |
| 1 | 470 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7 |
| 1 | 510 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 7k5 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | D_SiPM | LED_THT:LED_D1.8mm_W3.3mm_H2.4mm | D1 |
| 1 | input | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | output | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
More from xDocka15/Bachelor_project
1Similar boards
- 4 layers150.3 × 132.3 mm
- 2 layers95.6 × 92.2 mm
Signal generator
Pejo-306/digital-function-generator
A digital function generator which outputs waveforms up to 10 kHz
63 partsMIT - 4 layers99.9 × 99.9 mm
Signal generator
Pejo-306/digital-function-generator-v2
Цифров генератор на сигнали с тъчскрийн
157 partsMIT - 2 layers66.9 × 74.5 mm
- 2 layers86.4 × 64.8 mm
- 2 layers36.2 × 26.8 mm
Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm
Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm
TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k
Questions
How big is the Sensor PCB?
It measures 55.9 × 23.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sensor use?
20 parts, built around the AD8021ARZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sensor KiCad files?
From the xDocka15/Bachelor_project repository on GitHub, at the commit this page was made from: the board is DPS/Sensor/KiCad/Sensor.kicad_pcb and its schematic DPS/Main_module/KiCad/power_module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask xDocka15 before reusing the design.