
Qds cv
cnpem-emi/qds-cv-hw
Quench detection system for a single superconducting coil working in the Vertical Cryostat.

Pilot Arc Circuit and Code for cheap chinese HF start plasma cutters
Plasma Pilot3 is an open-source printed circuit board by xdmattz, from the xdmattz/Plasma-Starter repository on GitHub. It is a 2-layer board of 85.1 × 38.1 mm with 78 parts on 46 nets, routed with 446 tracks and 55 vias.
It is built around the ATTINY861A-SU, LMC7101ILT and LT1129CST-5, with the BSS138, BAV99 and BAV3004W among its other parts. Its parts include 25 resistors, 18 capacitors, 8 connectors, 5 transistors and 4 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10K | t_passive_smd:res_0603 | R1, R2, R3, R4, R7, R15, R16, R20, R21 |
| 7 | 0.1uF | t_passive_smd:cap_0603 | C5, C6, C11, C13, C14, C15, C17 |
| 7 | Res6 | t_passive_smd:res_0603 | R11, R12, R17, R18, R24, R25, R26 |
| 5 | CONN_01X02 | t_terminal:TerminalBlock5_08mm_x2 | P2, P3, P4, P5, P6 |
| 4 | TP | t_misc:TP50 | TP6, TP7, TP8, TP9 |
| 3 | 0.1uF | t_passive_smd:cap_0805 | C7, C8, C9 |
| 3 | 10uF | t_passive_smd:cap_1210 | C1, C2, C4 |
| 3 | BSS138 | t_sot:sot-23 | Q1, Q2, Q4 |
| 3 | TP | t_MtgHoles:MTG_200_125D | MTG1, MTG2, MTG3 |
| 3 | TP | t_misc:TP80 | TP1, TP3, TP4 |
| 2 | 1000pF | t_passive_smd:cap_0603 | C12, C18 |
| 2 | 22K | t_passive_smd:res_0805 | R5, R6 |
| 2 | BAV99 | t_sot:sot-23 | D1, D2 |
| 2 | CONN_01X03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | P7, P8 |
| 2 | LMC7101 | t_sot:sot-23-5 | U2, U3 |
| 2 | TP | t_misc:TP160 | TP2, TP10 |
| 1 | 0.1uF | t_passive_thd:Cap_Rad_13x6mm | C10 |
| 1 | 10 | t_passive_smd:res_1206 | R22 |
| 1 | 10 | t_passive_smd:res_0603 | R14 |
| 1 | 10 | t_passive_smd:res_0805 | R8 |
| 1 | 1000 | t_passive_smd:res_0805 | R19 |
| 1 | 1000pF | t_passive_smd:cap_0805 | C3 |
| 1 | 220 | t_passive_smd:res_0603 | R13 |
| 1 | 4.7K | t_passive_smd:res_0805 | R9 |
| 1 | 47uF | Capacitor_SMD:CP_Elec_8x6.9 | C16 |
| 1 | ATTINY861A-S | w_smd_dil:soic-20 | IC1 |
| 1 | BAV3004W | Diode_SMD:D_SOD-123F | D3 |
| 1 | CONN_02X03 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | P1 |
| 1 | EP10_GDT | t_coilcraft:EP10_SMT | T1 |
| 1 | FMMT3904 | t_smd_transistors:SOT-23 | Q5 |
| 1 | LT1129CST-5 | t_sot:SOT-223 | U1 |
| 1 | MOV | t_passive_thd:MOV_20mm | Z1 |
| 1 | Q_NIGBT_GEC | Package_TO_SOT_THT:TO-247-3_Vertical | Q3 |
| 1 | Res6 | t_passive_smd:res_1206 | R23 |
| 1 | TP | t_misc:TP100 | TP5 |

cnpem-emi/qds-cv-hw
Quench detection system for a single superconducting coil working in the Vertical Cryostat.



Sergio5714/experimental-teg-testbed-firmware
Firmware for STM32 MCU of testbed data acquisition and control system



aselectroworks/Analog_Delay
Multiple function BBD Analog Delay assisted by Digital Domain.

It measures 85.1 × 38.1 mm and has 2 copper layers, 1.6 mm thick.
78 parts, built around the ATTINY861A-SU, LMC7101ILT, LT1129CST-5 and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the xdmattz/Plasma-Starter repository on GitHub, at the commit this page was made from: the board is KiCAD/Plasma_Pilot3/Plasma_Pilot3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask xdmattz before reusing the design.