
StratoSoar MK3.0
crnicholson/StratoSoar-MK3
StratoSoar MK3, an autonomous glider meant for high-altitudes, accessible to everyone

Sensored is an open-source printed circuit board by XCR1793, from the XCR1793/Sensored repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 15 × 15 mm with 35 parts on 23 nets, routed with 91 tracks and 6 vias.
It is built around the BME280, ICM-20948 and TLV74318PDQNR3. Its parts include 16 connectors, 8 capacitors, 3 ICs and 2 resistors.
A simple very dense sensor module which includes an IMU and an environmental sensor. The system is designed to be easily integrated with any other projects and is relatively cheap to fabricate.

The Sensored board integrates two key devices: the ICM20948, a 9-axis motion sensor, and the BME280 for environmental monitoring. Designed for direct integration onto host boards, it operates on 3.3 V with onboard regulation for the IMU, providing a compact foundation for motion and environmental sensing in embedded systems.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 3V3 | Custom Connectors:1mm Pads | J2, J4, J6, J8, J13, J15 |
| 6 | GND | Custom Connectors:1mm Pads | J3, J5, J7, J9, J14, J16 |
| 5 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C3, C4, C6, C8 |
| 2 | 10K | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 1uF | Resistor_SMD:R_0402_1005Metric | C9, C11 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | SCL | Custom Connectors:1mm Pads | J10, J12 |
| 2 | SDA | Custom Connectors:1mm Pads | J1, J11 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C13 |
| 1 | 3V3 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP1 |
| 1 | BME280 | Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U3 |
| 1 | GND | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP4 |
| 1 | ICM-20948 | Sensor_Motion:InvenSense_QFN-24_3x3mm_P0.4mm | U1 |
| 1 | SCL | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP3 |
| 1 | SDA | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP2 |
| 1 | TLV74318PDQNR3 | Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm | U4 |

crnicholson/StratoSoar-MK3
StratoSoar MK3, an autonomous glider meant for high-altitudes, accessible to everyone

Mutzi1211/Wasserrakete
Ein Überblick über alle Projektbestandteile – von CAD über Code bis zu Anforderungen und Abgaben.



LEAT-EDGE/ambient-pcb-dkaiot
The design also provides empty footprints for several other sensors which are not populated in the Ambient variant: - Light sensor (LITEON LTR-303ALS-01) - MEMS microphone (Knowles SPH0645LM4H) - Indoor air quality…

Ningheim/Pathfinder
A compact 2-layer flight controller built around the STM32F722 — onboard 2S battery charging, IMU + barometer, microSD logging, two servo outputs. Currently working through final layout cleanup before fab.
/Old%200/Synth%20Head%20CPU/Synth%20Head%20CPU.kicad_pcb.jpg?size=s&soon)

willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
It measures 15 × 15 mm and has 2 copper layers, 0.8 mm thick.
35 parts, built around the BME280, ICM-20948 and TLV74318PDQNR3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the XCR1793/Sensored repository on GitHub, at the commit this page was made from: the board is Embedded/Sensored/Sensored.kicad_pcb and its schematic Embedded/Sensored/Sensored.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).