
LocalRoboCaster
JarneVG/RotocasterKUL
This is the accompanying code for the rotocasting machine, made in 2025 for the KU Leuven soft robotics research team.

Designed and developed a low-cost automated single-cell lithium-ion battery cycler for controlled charge and discharge testing. The system integrates a custom PCB, microcontroller-based control, and real-time data acquisition using Python and MATLAB for visualization and analysis.
AZ Capstone PCB Design is an open-source printed circuit board by xXAZAXx, from the xXAZAXx/Lithium-ion_Battery_Cycler_Capstone_Design_Project repository on GitHub. It is a 2-layer board of 139.1 × 98.1 mm with 11 parts on 40 nets, routed with 109 tracks and 2 vias.
It is built around the ARDUINO UNO R3 and IRL3705NPBF. Its parts include 3 resistors and 2 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Designed and developed a low-cost automated single-cell lithium-ion battery cycler for controlled charge and discharge testing. The system integrates a custom PCB, microcontroller-based control, and real-time data acquisition using Python and MATLAB for visualization and analysis.
The completed, soldered PCB used for the battery cycler system.

Schematic and 3D render showing component placement and overall hardware design.

Custom MATLAB App Designer interface used for real-time visualization and analysis of charge/discharge data.

The system enables reliable and repeatable charge/discharge testing of lithium-ion cells, with real-time monitoring and post-processing for performance evaluation.
This project was developed as part of a fourth-year capstone design project at the University of Windsor.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
| 2 | IRL3705NPBF | IRL3705NPBF:TO254P1041X444X1930-3 | Q1, Q2 |
| 1 | 10k | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | NTC_Thermistor1 |
| 1 | 3 | 20J3R0E_footprints:RES_20_OHM | Power_Resitor1 |
| 1 | 904 | INA219:MODULE_904 | INA219 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | Battery_Cell | 103048_Li-ion_Polymer_Battery:103048 Li-ion Polymer Battery | BT1 |
| 1 | ~ | TP4056-Module-AZ:TP4056-MODULE-AZ | TP4056 |

JarneVG/RotocasterKUL
This is the accompanying code for the rotocasting machine, made in 2025 for the KU Leuven soft robotics research team.


AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.

AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum

Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.

PedroCNeves/AC_ChargingStation
A learning project to create an EV AC Charging station based on an Arduino Uno

jonsag/arduTester
An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4

It measures 139.1 × 98.1 mm and has 2 copper layers, 1.6 mm thick.
11 parts, built around the ARDUINO UNO R3 and IRL3705NPBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the xXAZAXx/Lithium-ion_Battery_Cycler_Capstone_Design_Project repository on GitHub, at the commit this page was made from: the board is Battery Cycler/AZ_PCB_Capstone/AZ_Capstone_PCB_Design/AZ_Capstone_PCB_Design.kicad_pcb and its schematic Battery Cycler/AZ_PCB_Capstone/AZ_Capstone_PCB_Design/AZ_Capstone_PCB_Design.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask xXAZAXx before reusing the design.