Skip to the content
2 layers100 × 100 mmEEE3088F PROJECT, the printed circuit board in 3D

EEE3088F PROJECT

xNiDx/EEE3088F-PROJECT

The door unlocks if there is an object in close proximity and a certain sound is pplayed for some time. This is to be paired with a device that emits a sound, which is not in the scope of this project.

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
64
Nets
96
Pads
284
Tracks, vias
337, 12
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
11 May 2026
Updated
11 May 2026

Overview

EEE3088F PROJECT is an open-source printed circuit board by xNiDx, from the xNiDx/EEE3088F-PROJECT repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 100 mm with 64 parts on 96 nets, routed with 337 tracks and 12 vias.

It is built around the CH340E, LM358M and VCNL36821S, with the AO3400A, AT24C256C-SSHL-T and FS312F-G among its other parts. Its parts include 14 resistors, 11 ICs, 10 capacitors, 2 diodes and 2 connectors. It belongs with the STM32 boards of this library.

Main components

8

README

README.md

The Project

Name

EEE3088F Team 20 "The Project" Sound/Proximity HAT

Description

Welcome to our project repository for a HAT (Hardware Attached on Top) that includes both a proximity and sound sensor for the STM32F0 series microcontroller. We are a team of 3 engineers who are passionate about embedded systems and hardware design. In this repository, you will find all the necessary resources to replicate our project and get started with your own HAT design.

The door unlocks if there is an object in close proximity and a certain sound is pplayed for some time. This is to be paired with a device that emits a sound, which is not in the scope of this project.

Features

Our HAT includes the following features:

  • Proximity Sensor: We used the VCNL36821S proximity sensor to detect objects within a range of 2m. The sensor communicates with the microcontroller over I2C.
  • Sound Sensor: We used the NSM2402AT-LL1 microphone to capture sound waves and convert them into digital signals. The microphone communicates with the microcontroller over an analog input.

Getting Started

To replicate our project, you will need the following components:

  • STM32F0 series microcontroller
  • VCNL36821S proximity sensor
  • NSM2402AT-LL1 microphone
  • PCB design software (we used KiCad)

You can find the schematic and PCB layout files in the /Main directory of this repository. Once you have assembled the components and flashed the firmware, you can test the HAT by running the demo code provided in the /Firmware directory.

Future Work

There are several ways to improve upon our design and add new features to the HAT. Some potential ideas include:

  • Adding more sensors, such as temperature and humidity sensors
  • Implementing wireless communication protocols, such as Bluetooth or Wi-Fi
  • Developing a mobile app to interface with the HAT

Support

https://teams.microsoft.com/l/team/19%3aP4NE9ADC8NRNmoZ5VnWWua3hW-QxzX29JxDW-ZCJ8Oo1%40thread.tacv2/conversations?groupId=e8aad598-cd24-4909-ae14-fc9121c0fe86&tenantId=92454335-564e-4ccf-b0b0-24445b8c03f7

Roadmap

  1. Wk01 Project start
  2. Wk02 Concept Proposal
  3. Wk03 Design Proposal
  4. Wk04 Initial Schematic and Simulation Design
  5. Wk05 PCB Initial Designs
  6. Wk06 Peer review of PCB Design Reports
  7. Wk07 PCB Gerber Files Hand-in
  8. Wk08 Sensor Budget Tutorial
  9. Wk09 Draft final project design report
  10. Wk10 PCBs returned to students
  11. Wk11 Work on Report and Demo
  12. Wk12 Work on Report and Demo
  13. Wk13 Documentation and Software
  14. Wk14 Lab Demo / GA opportunity 2 (oral if required)

Credits

This project was made possible by the hard work and dedication of the following team members:

  • Si Teng Wu: Microcontroller programmer
  • Nüvit Ilkin Demirtaş: Sensing module design
  • Joseph Stewart: Power systems design

License

This project is licensed under the MIT License.

Project status

Design Proposal --> Inital Design --> PCB Design --> PCB Gerbers

Parts

64
QtyValueFootprintReferences
20SIL_01x02_MALEConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalFP1, FP2, FP3, FP4, FP5, FP10, FP11, FP12, FP13, FP14, FP15, FP16, FP17, FP18, FP19, FP20 +4
50.1uFFootprints:CAPC2012X140NC3, C4, C5, C6, C7
40ΩResistor_SMD:R_1206_3216MetricR6, R7, R8, R14
310kΩResistor_SMD:R_0805_2012MetricR1, R4, R5
310uFFootprints:CAPC2012X135NC8, C9, C10
31kΩResistor_SMD:R_0805_2012MetricR9, R10, R12
21.5kΩResistor_SMD:R_0805_2012MetricR2, R3
230pFCapacitor_SMD:C_0805_2012MetricC1, C2
2AO3400AFootprints:N MOSFETU8, U10
2SIL_01x24_MALEConnector_PinHeader_2.54mm:PinHeader_1x24_P2.54mm_VerticalJP1, JP2
2SchottkyFootprints:DIOM5436X244ND1, D2
11.2kΩResistor_SMD:R_0805_2012MetricR11
1100ΩResistor_SMD:R_0805_2012MetricR13
118650 ConnectorFootprints:BH-18650-B1BA002J2
18MHz CrystalFootprints:CRYSTAL-SMD_L11.5-W4.8-LS12.7X1
1AT24C256C-SSHL-TFootprints:SOIC127P600X175-8NU1
1CH340EFootprints:MSOP10U3
1FS312F-GFootprints:FS312F-GU9
1LM2937L-33-TQ2-RFootprints:TO-263-3_L8.6-W10.2-P2.54-LS14.4-TLU11
1LM358MFootprints:SOIC127P599X175-8NU6
1Micro USBFootprints:USB_Conn_JLC_LCSC_C404969J1
1NSM2402AT-LL1Footprints:NSM2402AT-LLU5
1Reset Switch (Push)Footprints:SW_TS-1187A-B-A-BS1
1SIL_01x10_MALEConnector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_VerticalJP3
1STM32F0 Target SocketsFootprints:STM32F051C6T6 SocketsU2
1TP4056-42-ESOP8Footprints:SOIC127P600X175-9NU7
1VCNL36821SFootprints:VCNL36821SU4

Similar boards

  • 2 layers121 × 73 mmPonictron, the printed circuit board in 3D

    Ponictron

    bbokser/ponictron

    75 partsMIT
  • 2 layersPLC V1, the printed circuit board in 3D

    PLC V1

    JosueHerrera05/Josue_Herrera_Electiva_2026_C2

    Repositorio Electíva Diseño Mecatrónico 2026-C2

    59 partsMIT
  • 2 layers96 × 70 mmEEE3088F HAT, the printed circuit board in 3D

    EEE3088F HAT

    rb-jones/EEE3088F_HAT

    See a 3D render of the PCB from KiCad below,

    84 partsCC-BY-4.0
  • 2 layers63.8 × 31.8 mm18650 Battery Charging, the printed circuit board in 3D

    18650 Battery Charging

    Indhiraarunachalam/18650_Battery_Charging

    18650 Lithium-Ion Battery Charging PCB designed using KiCad .

    18 partsMIT
  • 2 layers28 × 17.1 mmTp4056 module, the printed circuit board in 3D

    Tp4056 module

    Roshan-khatri78/Electronics-Projects-KiCad-

    A collection of my KiCad projects and PCB designs. These projects reflect my learning journey in electronics and PCB design.

    19 parts2
  • 2 layers40 × 20 mmDutyCycle, the printed circuit board in 3D

    DutyCycle

    FASTSHIFT/DutyCycle

    Work-Life Duty Cycle Clock

    46 parts18MIT
  • 4 layersVibamix, the printed circuit board in 3D

    Vibamix

    CoolNamesAllTaken/vibamix

    An interactive ePaper nametage for playing "will it blend" with arbitrary groups of people.

    78 parts

Questions

How big is the EEE3088F PROJECT PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the EEE3088F PROJECT use?

64 parts, built around the CH340E, LM358M, VCNL36821S and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the EEE3088F PROJECT KiCad files?

From the xNiDx/EEE3088F-PROJECT repository on GitHub, at the commit this page was made from: the board is Main/Main.kicad_pcb and its schematic Main/Main.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the EEE3088F PROJECT design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).