

Halo
Desktop Edge-lit portrait stand.
- Size
- 243.8 × 66.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 165
- Nets
- 112
- Pads
- 615
- Tracks, vias
- 1,270, 180
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Oct 2020
- Updated
- 6 Aug 2023
Overview
Halo is an open-source printed circuit board by wyolum, from the wyolum/halo repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 243.8 × 66.3 mm with 165 parts on 112 nets, routed with 1,270 tracks and 180 vias.
It is built around the ATMEGA328-PU, LM1117-3.3 and LM1117-5.0, with the WS2812B, MBRS240LT3G(MS) and 2N7002DW-7-F-ES among its other parts. Its parts include 68 diodes, 30 capacitors, 15 resistors, 11 connectors and 3 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
7ATMEGA328-PU
PDIP-28-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorisedLM1117-5.0
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 5V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorisedWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorisedMBRS240LT3G(MS)
SMBSchottky DiodesMSKSEMI2N7002DW-7-F-ES
SOT-363-55℃~+150℃ 1.6V 1.85Ω@10V、2.05Ω@4.5V 1.8nC@4.5V 11pF 2 N-Channel 28pF 300mA 350mW 4pF 60V N-Channel SOT-363 MOSFETs ROHSElecSuperMOSFETsUSB4110-GF-A
SMD-40℃~+85℃ 1 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
README.mdhalo
Desktop Edge-lit portrait stand.
Instructions:
Parts
165| Qty | Value | Footprint | References |
|---|---|---|---|
| 64 | WS2812B | halo:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +48 |
| 22 | 100nF | halo:C_0805_2012Metric | C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24 +6 |
| 21 | I_O | halo:breakout_smd | B1, B2, B3, B4, B10, B11, B12, B13, B14, B15, B16, B17, B18, B19, B20, B21 +5 |
| 8 | 10k | halo:R_0805_2012Metric | R1, R2, R3, R4, R12, R13, R14, R15 |
| 8 | SCREW | halo:MountingHole_3.2mm_M3_Pad_Via | SC1, SC2, SC3, SC4, SC5, SC6, SC7, SC8 |
| 3 | 100uF | halo:CP_Elec_6.3x7.7 | C1, C7, C27 |
| 3 | 1uF | halo:C_0805_2012Metric | C3, C4, C8 |
| 2 | 1k | halo:R_0805_2012Metric | R7, R8 |
| 2 | 20pF | halo:C_0805_2012Metric | C5, C6 |
| 2 | 220E | halo:R_0805_2012Metric | R9, R10 |
| 2 | 5k11 | halo:R_0805_2012Metric | R5, R6 |
| 2 | MBRS240LT3G | halo:D_SMB | D33, D34 |
| 1 | 0E | halo:R_0805_2012Metric | R11 |
| 1 | 12V_DC | halo:barrel_jack_DC-005-5A-2_5-SMT | J3 |
| 1 | 12V_DC | halo:conn_barrel | J1 |
| 1 | 16MHz | halo:Crystal_SMD_3225-4Pin_3.2x2.5mm | X1 |
| 1 | 2N7002DW-7-F | halo:SOT-363_SC-70-6 | Q1 |
| 1 | ATMEGA328 | halo:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | AUX_DC_OUT | halo:PinSocket_1x04_P2.54mm_Vertical_SMD_Pin1Left | P8 |
| 1 | FTDI | halo:PinHeader_1x06_P2.54mm_Vertical_SMD_Pin1Left | P2 |
| 1 | LED_BLNK | halo:LED_0805_2012Metric | D36 |
| 1 | LED_IN | halo:PinSocket_1x04_P2.54mm_Vertical_SMD_Pin1Left | P1 |
| 1 | LED_OUT | halo:PinSocket_1x04_P2.54mm_Vertical_SMD_Pin1Left | P4 |
| 1 | LED_PWR | halo:LED_0805_2012Metric | D35 |
| 1 | LM1117-3.3 | halo:SOT-223-3_TabPin2 | U3 |
| 1 | LM1117-5.0 | halo:SOT-223-3_TabPin2 | U2 |
| 1 | MODE | halo:PinHeader_2x02_P2.54mm_Vertical_SMD | SW2 |
| 1 | RST | halo:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1 |
| 1 | SPI | halo:TC2030-IDC | P3 |
| 1 | USB4110-GF-A | halo:GCT_USB4110-GF-A | J2 |
| 1 | USB_header | halo:PinHeader_2x04_P2.54mm_Vertical_SMD | P6 |
| 1 | generic | halo:generic_apds_9960_smd | P7 |
| 1 | logo_OSH | halo:logo_OSHW_11.4x12mm_SilkScreen | G3 |
| 1 | logo_halo | halo:logo_halo | G1 |
| 1 | logo_halo | halo:logo_halo_10mm | G5 |
| 1 | logo_kicad | halo:logo_KiCad_12mm_SilkScreen | G2 |
| 1 | logo_wyolum | halo:logo_wyolum | G4 |
| 1 | qwiic | halo:sparkfun_apds_9960_smd | P5 |
More from wyolum/halo
2- 2 layers243.8 × 66.3 mm

- 2 layers253.7 × 383.9 mm

Similar boards
- 4 layers48 × 87 mm

- 2 layers110 × 89 mm

- 4 layers50 × 50 mm

- 4 layers17.8 × 43.2 mm

- 4 layers180 × 160 mm

PCE colorlight carrier
supermomo31/PCE_colorlight_carrier
console PCE depuis un FPGA format SODIMM : colorlight i5
258 parts - 2 layers32 × 14 mm

Ptn3222 breakout
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
42 parts253GPL-3.0 - 2 layers25 × 61.5 mm

- 2 layers53.3 × 68.6 mm

Questions
How big is the Halo PCB?
It measures 243.8 × 66.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Halo use?
165 parts, built around the ATMEGA328-PU, LM1117-3.3, LM1117-5.0 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Halo KiCad files?
From the wyolum/halo repository on GitHub, at the commit this page was made from: the board is kicad_v3/halo.kicad_pcb and its schematic kicad_v1/halo.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Halo design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).