wyolum/MC6017break out board for Quectel MC60 Ultra-small LCC Quad-band GSM/GPRS/GNSS Module
MC60 is an open-source printed circuit board by wyolum, from the wyolum/MC60 repository on GitHub. It is a 2-layer board of 60 × 70 mm with 109 parts on 99 nets, routed with 939 tracks and 400 vias.
It is built around the MIC29302WU, DTC114E and ESD9B5.0ST5G, with the RCLAMP0854P.TCT, DTC143ZUA and PDZVTR5.1B among its other parts. Its parts include 45 capacitors, 13 resistors, 11 connectors, 8 diodes and 8 inductors.
break out board for Quectel MC60 Ultra-small LCC Quad-band GSM/GPRS/GNSS Module
http://www.quectel.com/product/mc60.htm
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 33pF | mc60_fp:C_0402_NoSilk | C8, C9, C10, C11, C13, C18, C20, C22, C24, C33, C45 |
| 8 | 0E | mc60_fp:R_0402_NoSilk | L1, R2, R3, R4, R11, R12, R13, R15 |
| 8 | 100nF | mc60_fp:C_0402_NoSilk | C16, C17, C28, C32, C36, C39, C41, C44 |
| 6 | 10pF | mc60_fp:C_0402_NoSilk | C14, C19, C21, C23, C25, C34 |
| 6 | 10pF_DNP | mc60_fp:C_0603 | C2, C3, C4, C5, C6, C7 |
| 5 | 10uF | mc60_fp:C_0805 | C12, C15, C26, C38, C43 |
| 4 | SCREW | mc60_fp:mtg_hole_3mm_vias_2 | SC1, SC2, SC3, SC4 |
| 3 | 22E | mc60_fp:R_0603 | R6, R7, R10 |
| 3 | 470uF | mc60_fp:CP_Elec_10x10 | C27, C29, C30 |
| 3 | 4u7 | mc60_fp:C_0805 | C1, C37, C42 |
| 3 | DTC114E | mc60_fp:SOT-323_SC-70 | Q1, Q2, Q3 |
| 2 | 100k | mc60_fp:R_0603 | R1, R5 |
| 2 | 100uF | mc60_fp:CP_Elec_8x10.5 | C35, C40 |
| 2 | 390E | mc60_fp:R_0603 | R8, R18 |
| 2 | ESD9B5.0ST5G | mc60_fp:D_SOD-923 | D5, D6 |
| 2 | RClamp0854P.TCT | mc60_fp:SLP1616P6 | D1, D4 |
| 1 | 10k | mc60_fp:R_0603 | R14 |
| 1 | 124k | mc60_fp:R_0603 | R17 |
| 1 | 1uF | mc60_fp:C_0603 | C31 |
| 1 | 270E | mc60_fp:R_0603 | R9 |
| 1 | 3V3_EXT | mc60_fp:Pin_Header_Straight_1x03 | H3 |
| 1 | 3V3_EXT<>5V | mc60_fp:Pin_Header_Straight_1x03_Pitch1.27mm | JP1 |
| 1 | 47k | mc60_fp:R_0603 | R20 |
| 1 | 51k | mc60_fp:R_0603 | R16 |
| 1 | 56k | mc60_fp:R_0603 | R19 |
| 1 | 5V_IN | mc60_fp:conn_screw_2.54mm_2pol | CN6 |
| 1 | ANT_BT | mc60_fp:ant_bt_inpaq5036 | AE1 |
| 1 | Audio-Jack-4 | mc60_fp:AUDIO8P-SMD-3.5-14.5X6X5MM | CN5 |
| 1 | B_ADC | mc60_fp:Test_Point_Pad_2.0x2.0mm | J5 |
| 1 | B_LS_N | mc60_fp:Test_Point_Pad_2.0x2.0mm | J1 |
| 1 | B_SPKN | mc60_fp:Test_Point_Pad_2.0x2.0mm | J4 |
| 1 | B_SPKP | mc60_fp:Test_Point_Pad_2.0x2.0mm | J3 |
| 1 | B_VRTC | mc60_fp:Test_Point_Pad_2.0x2.0mm | J2 |
| 1 | Conn_GNSS | mc60_fp:Molex_Microcoaxial_RF | CN2 |
| 1 | Conn_GPS | mc60_fp:Molex_Microcoaxial_RF | CN1 |
| 1 | DTC143ZUA | mc60_fp:SOT-323_SC-70 | Q4 |
| 1 | GSM_PWR_EN | mc60_fp:Pin_Header_Straight_1x03_Pitch1.27mm | JP2 |
| 1 | KiCad | mc60_fp:KiCad-Logo3_6mm_SilkScreen | G2 |
| 1 | LED_FIX | mc60_fp:LED_0603 | D3 |
| 1 | LED_NET | mc60_fp:LED_0603 | D2 |
| 1 | LED_PWR | mc60_fp:LED_0603 | D8 |
| 1 | LOGO_WL | mc60_fp:logo_wyo3 | G3 |
| 1 | LP5907-2V8 | mc60_fp:SOT-23-5 | U5 |
| 1 | LP5907-3V3 | mc60_fp:SOT-23-5 | U4 |
| 1 | MC60_0 | mc60_fp:XCVR_MC60 | U1 |
| 1 | MIC29302 | mc60_fp:TO-252-5_TabPin3 | U3 |
| 1 | ON<>OFF | mc60_fp:Pin_Header_Straight_1x03 | H4 |
| 1 | OSHW | mc60_fp:Logo_silk_OSHW_6x6mm_mask | G1 |
| 1 | PDZVTR5.1B | mc60_fp:D_SOD-128 | D7 |
| 1 | SD_CARD | mc60_fp:microsd-9-suntech-ST-TF-003A | CN3 |
| 1 | SIM_Card | mc60_fp:conn_microSIM_320100004 | CN4 |
| 1 | SW-ON | mc60_fp:SW_SPST_WS_TASV | S1 |
| 1 | TXB0108PWR | mc60_fp:TSSOP-20_4.4x6.5mm_Pitch0.65mm | U2 |
| 1 | UART | mc60_fp:Pin_Header_Straight_2x04 | H2 |
| 1 | UART_DBG | mc60_fp:Pin_Header_Straight_1x04 | H1 |
Tomas-Kuchta-FPV/Open-ESPilot
An open-source project to develop a custom ESP32-based flight controller designed primarily for use with ArduPilot. Focused on affordability, flexibility, and ease of integration with various robotic and UAV platforms.
ahmadexp/Open-Source-PC110
Figuring out the missing technical documentation of the beloved PC110
It measures 60 × 70 mm and has 2 copper layers, 1.6 mm thick.
109 parts, built around the MIC29302WU, DTC114E, ESD9B5.0ST5G and RCLAMP0854P.TCT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the wyolum/MC60 repository on GitHub, at the commit this page was made from: the board is kicad/mc60.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask wyolum before reusing the design.