

Barrel
5x7 laser gun
- Size
- 12 × 23.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 8
- Pads
- 20
- Tracks, vias
- 26, 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 2 May 2023
- Updated
- 2 May 2023
Overview
Barrel is an open-source printed circuit board by wryan67, from the wryan67/5x7laser repository on GitHub, published under the MIT licence. It is a 2-layer board of 12 × 23.5 mm with 10 parts on 8 nets, routed with 26 tracks and 4 vias.
Its parts include 4 resistors, 4 diodes and 2 connectors.
README
readme.mdParts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4 |
| 4 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4 |
| 2 | Conn_01x02_Pin | Headers:PinHeader_1x02_P2.54mm_Vertical_Wide | J1, J2 |
More from wryan67/5x7laser
1- 2 layers74.9 × 31.8 mm

Similar boards
- 2 layers57 × 55.2 mm

LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0 - 2 layers32.2 × 15.4 mm

Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm

Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm

- 2 layers44.3 × 30.5 mm

Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm

Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm

Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0
Questions
How big is the Barrel PCB?
It measures 12 × 23.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Barrel use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Barrel KiCad files?
From the wryan67/5x7laser repository on GitHub, at the commit this page was made from: the board is schematic/kicad/barrel/barrel.kicad_pcb and its schematic schematic/kicad/barrel/barrel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Barrel design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).