2 layers12 × 23.5 mm
2 layers74.9 × 31.8 mm
Laser
wryan67/5x7laser5x7 laser gun
- Size
- 74.9 × 31.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 68
- Nets
- 41
- Pads
- 161
- Tracks, vias
- 292, 41
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 2 May 2023
- Updated
- 2 May 2023
Overview
Laser is an open-source printed circuit board by wryan67, from the wryan67/5x7laser repository on GitHub, published under the MIT licence. It is a 2-layer board of 74.9 × 31.8 mm with 68 parts on 41 nets, routed with 292 tracks and 41 vias.
It is built around the NE555D and PMBT2222A. Its parts include 19 resistors, 15 connectors, 14 capacitors, 4 ICs and 3 transistors.
Main components
2README
readme.md5x7 laser gun
This lasergun can be produced using 5" x 7" sheets of plastic or basswood.
Parts
68| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | LED | Headers:PinHeader_1x02_P2.54mm_Vertical_Wide | J9, J10, J11, J12, J13, J14, J15, J16 |
| 7 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R4, R6, R9, R10, R12, R19 |
| 4 | 104 | Capacitor_SMD:C_0805_2012Metric | C2, C4, C5, C9 |
| 4 | 200 Ω | Resistor_SMD:R_0805_2012Metric | R15, R16, R17, R18 |
| 4 | Yellow | LED_SMD:LED_0805_2012Metric | PLAY3, PLAY4, PLAY5, PLAY6 |
| 3 | 100k | Resistor_SMD:R_0805_2012Metric | R7, R13, R14 |
| 3 | 102 | Capacitor_SMD:C_0805_2012Metric | C6, C7, C14 |
| 2 | 100k pot | Headers:PinHeader_1x02_P2.54mm_Vertical_Wide | J7, J8 |
| 2 | 105 | Capacitor_SMD:C_0805_2012Metric | C11, C12 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R8, R11 |
| 2 | 2PB709AXL | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | Blue | LED_SMD:LED_0805_2012Metric | PLAY1, PLAY2 |
| 2 | Green | LED_SMD:LED_0805_2012Metric | PWR1, PWR2 |
| 1 | 106 | Capacitor_SMD:C_0805_2012Metric | C13 |
| 1 | 220 µF | Capacitor_THT:CP_Radial_Tantal_D6.0mm_P2.50mm | C3 |
| 1 | 334 | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 394 | Capacitor_SMD:C_0805_2012Metric | C10 |
| 1 | 475 | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 80k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | ISD1820 | Local:ISD1820 | U2 |
| 1 | LM4871MX_NOPB | Local:LM4871 | IC1 |
| 1 | Mic | Headers:PinHeader_1x02_P2.54mm_Vertical_Wide | J4 |
| 1 | NE555D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | PMBT2222A | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | Play | Headers:PinHeader_1x02_P2.54mm_Vertical_Wide | J3 |
| 1 | Power | Headers:PinHeader_1x02_P2.54mm_Vertical_Wide | J1 |
| 1 | Rec | Headers:PinHeader_1x02_P2.54mm_Vertical_Wide | J2 |
| 1 | Red | LED_SMD:LED_0805_2012Metric | REC1 |
| 1 | Speaker | Headers:PinHeader_1x02_P2.54mm_Vertical_Wide | J6 |
| 1 | ua7805 | Local:ua7805-KTT-_R-PSFM-G3_ | U1 |
The 64 most common of 68 parts.
More from wryan67/5x7laser
1Similar boards
- 2 layers57.2 × 35.1 mm
- 2 layers83.3 × 76.1 mm
Srom
derekfountain/zx-spectrum-pico-rom
A Raspberry Pi Pico based device to emulate a ROM on a ZX Spectrum
31 parts44GPL-2.0 - 4 layers100 × 99.9 mm
Srom
derekfountain/zx-spectrum-pico-interface-one
A recreation of the ZX Spectrum Expansion System, a hardware Microdrive emulator
43 parts42GPL-2.0 - 6 layers95.9 × 90.2 mm
Cpb
OakwoodEngineering/ObiWanKomputer
The Obi Wan Komputer and Combined Payload Boards from the NyanSat project.
251 parts10 - 2 layers99.9 × 98.2 mm
Zx spectrum diagnostics
derekfountain/zx-spectrum-diagnostics
A hardware diagnostics board for the 48K ZX Spectrum
76 parts8GPL-3.0 - 2 layers98.2 × 99.9 mm
Zx spectrum pico dma
derekfountain/zx-spectrum-pico-dma
Exploring using a microcontroller for DMA transfers into a ZX Spectrum
20 partsGPL-3.0 - 4 layers142.9 × 91.9 mm
- 4 layers144.5 × 95.5 mm
Questions
How big is the Laser PCB?
It measures 74.9 × 31.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Laser use?
68 parts, built around the NE555D and PMBT2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Laser KiCad files?
From the wryan67/5x7laser repository on GitHub, at the commit this page was made from: the board is schematic/kicad/main/laser.kicad_pcb and its schematic schematic/kicad/barrel/barrel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Laser design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).