2 layers209.2 × 134.5 mm
2 layers
Kicad intro
wrightedu/intel3PCB and arduino info for summer intel camp
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 41
- Pads
- 56
- Tracks, vias
- 38, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 1 Jul 2024
- Updated
- 25 Jul 2025
Overview
Kicad intro is an open-source printed circuit board by wrightedu, from the wrightedu/intel repository on GitHub. It is a 2-layer board with 9 parts on 41 nets, routed with 38 tracks and 0 vias.
It is built around the ARDUINO UNO R3. Its parts include 7 resistors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdWelcome!
Today we are meeting in: 152C Russ for our FINAL DAY!!!
Great job on your designs all! We will recume fabrication after lunch if anyone has any loose ends to tie up on their boards.
Resources:
-
This site: github.com/wrightedu/intel
./arduino-src/: arduino source files will be put here./KiCad/: KiCad example project files (mostly starter templates)- More folders and files will be added as we go through the course
-
Download and install Arduino IDE from here: https://www.arduino.cc/en/software
-
Download and install KiCAD from here: https://www.kicad.org/download/
-
CSE Department Discord server: https://discord.gg/pMUMzTt
#other-rolesand click onIntel Summer Camp
The Format
*.mda markdown formatted file for pretty web rendering here- PowerPoint (
*.pptx) and*.pdffiles (self explanatory) *.inofiles are for the arduino
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | R_US | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A3 |
| 1 | D168K | Display_7Segment:D1X8K | U1 |
Questions
What parts does the Kicad intro use?
9 parts, built around the ARDUINO UNO R3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kicad intro KiCad files?
From the wrightedu/intel repository on GitHub, at the commit this page was made from: the board is Template-Projects/KiCad/kicad-intro/kicad-intro.kicad_pcb and its schematic 2025-Student-Projects/3DScanner/StepperNMotor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kicad intro design in my own project?
Its repository states no licence, so its author keeps all rights: ask wrightedu before reusing the design.
More from wrightedu/intel
8- 2 layers69 × 57.5 mm
- 2 layers66.5 × 53.5 mm
- 2 layers58.5 × 54.5 mm
- 2 layers100.5 × 67.5 mm
- 2 layers66.5 × 53.5 mm
- 2 layers53 × 53.5 mm
- 2 layers72.5 × 57.5 mm
Similar boards
- 2 layers68.8 × 53.6 mm
Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
149 parts257GPL-3.0 - 2 layers69.1 × 53.8 mm
Motor controller
AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum
25 parts79MIT - 2 layers68.6 × 53.3 mm
Protogasm Board V2
Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.
14 parts67MIT - 2 layers53.8 × 69.6 mm
EVSE V2 2
PedroCNeves/AC_ChargingStation
A learning project to create an EV AC Charging station based on an Arduino Uno
32 parts50 - 2 layers113.7 × 61 mm
ArduTester SMD
jonsag/arduTester
An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4
17 parts14 - 4 layers65.9 × 52.9 mm
- 4 layers68.6 × 53.3 mm
101 PCB
ICRS/101
The all-new open source Robotics 101 course from ICRS. It's specifically designed to be run in hackspaces, after school clubs and university societies.
89 parts10CC-BY-4.0 - 2 layers53.3 × 68.3 mm
