

BsidesDSM26
- Size
- 66.7 × 121 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 91
- Nets
- 83
- Pads
- 279
- Tracks, vias
- 681, 172
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 23 Mar 2023
- Updated
- 2 Jun 2026
Overview
BsidesDSM26 is an open-source printed circuit board by wrickert, from the wrickert/UntitledElectronics repository on GitHub. It is a 2-layer board of 66.7 × 121 mm with 91 parts on 83 nets, routed with 681 tracks and 172 vias.
It is built around the CH585M, NS4150B and SK6812SIDE-A, with the AMS1117-3.3 among its other parts. Its parts include 30 capacitors, 10 resistors, 8 connectors, 7 ICs and 4 inductors.
Main components
4CH585M
QFN-48-EP(5x5)-40℃~+85℃ 1.75V~3.6V 12bit 32 Bit 40 504KB 78MHz 96KB Built-in FLASH RISC-V3C QFN-48-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSWCH (Nanjing Qinheng Microelectronics)Microcontrollers (MCU/MPU/SOC)NS4150B
MSOP-8-40℃~+85℃ -80dB 0.1% 1 Pair Differential Inputs 1-Channel 3V~5.25V 3Wx1@4Ω 4mA 88%、90% Automatic mute/no-noise switch、Enable/shutdown function、Filterless architecture、ESD protection Class D MSOP-8 Audio Amplifiers ROHSShenzhen Nsiway TechAudio AmplifiersSK6812SIDE-A
SMD-4P,4x1.6mm-40℃~+85℃ 0.6mA 1.6mm 120° 160mcd~320mcd 1kHz 2000V 240mcd~450mcd 2mm 3.7V~5.5V 460nm~470nm 4mm 520nm~535nm 620nm~625nm 697.5mcd~1162.5mcd 800Kbit/s Built-in power-on reset circuit Translucent Frosted Lens SMD-4P,4x1.6mm RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdUntitledElectronics
Parts
91| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C10, C15, C16, C27, C28 |
| 4 | Conn_01x02 | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | J3, J4, J5, J6 |
| 4 | MountingHole | UE_Standoff:M3ThreadedStandoff | H1, H2, H3, H4 |
| 4 | SK6812_Side | UE_LED:SK6812SIDE-A-RVS | U1, U2, U3, U4 |
| 4 | TestPoint_Small | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | 100p | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric | C4, C7 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C23, C24 |
| 2 | 150p | Capacitor_SMD:C_0603_1608Metric | C13, C14 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C26, C29 |
| 2 | 1uH | Inductor_SMD:L_0603_1608Metric | L1, L2 |
| 2 | 20pF | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | 24p | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 2 | 2R | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 30K | Resistor_SMD:R_0805_2012Metric | R8, R9 |
| 2 | 30p | Capacitor_SMD:C_0603_1608Metric | C11, C12 |
| 2 | CJ3405 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | RST | UE_Buttons:TS3315A | SW2, SW3 |
| 2 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2 |
| 2 | TBD | Capacitor_SMD:C_0603_1608Metric | C21, C22 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C19 |
| 1 | 10u | Inductor_SMD:L_1008_2520Metric | L3 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 1nF | Capacitor_SMD:C_0805_2012Metric | C25 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C20 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C17 |
| 1 | 2.4GHz ANT | RF_Antenna:Texas_SWRA117D_2.4GHz_Left | AE2 |
| 1 | 2k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 32MHz ±10ppm 12pF | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 4.7nF | Capacitor_SMD:C_0805_2012Metric | C30 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C18 |
| 1 | 5.1k | Resistor_SMD:R_Array_Convex_4x0603 | RN1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U6 |
| 1 | BOOT | UE_Buttons:TS3315A | SW1 |
| 1 | Battery_Cell | UE_Battery:Keystone5220_AA | BT1 |
| 1 | CH585M | UE_Module:QFN-48-1EP_5x5mm_P0.35mm_EP3.7x3.7mm | U5 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | G*** | kibuzzard-69CD7A0E | kibuzzard-69CD7A0E |
| 1 | G*** | kibuzzard-69FCE3C1 | kibuzzard-69FCE3C1 |
| 1 | G*** | kibuzzard-69CD792A | kibuzzard-69CD792A |
| 1 | G*** | kibuzzard-69CD7A3A | kibuzzard-69CD7A3A |
| 1 | G*** | kibuzzard-69CD7907 | kibuzzard-69CD7907 |
| 1 | G*** | kibuzzard-69CD7919 | kibuzzard-69CD7919 |
| 1 | G*** | kibuzzard-69CD78FD | kibuzzard-69CD78FD |
| 1 | G*** | kibuzzard-69CD6EDC | kibuzzard-69CD6EDC |
| 1 | G*** | kibuzzard-69FCB6F3 | kibuzzard-69FCB6F3 |
| 1 | G*** | kibuzzard-69CD79CB | kibuzzard-69CD79CB |
| 1 | NFC_ANT | UE_Module:NFC Anenna | AE1 |
| 1 | NS4150B | Package_SO:MSOP-8_3x3mm_P0.65mm | U7 |
| 1 | Speaker | Connector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | J8 |
| 1 | TBD | Inductor_SMD:L_0603_1608Metric | L4 |
| 1 | TP | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | U.FL | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | J2 |
| 1 | USB_C_Plug_USB2.0 | UE_USB:USB_C_Receptical-Jing | J1 |
More from wrickert/UntitledElectronics
12- 2 layers211.5 × 207 mm

- 2 layers75.2 × 148.5 mm

- 2 layers175.8 × 179.3 mm

- 2 layers153.6 × 171.1 mm

- 2 layers148.9 × 219.8 mm

- 2 layers118.9 × 197.3 mm

- 2 layers134.4 × 141.9 mm

- 2 layers66.7 × 121 mm

- 2 layers217 × 77.1 mm

- 2 layers88.1 × 44.6 mm

- 2 layers134.9 × 102.4 mm

- 2 layers189.9 × 85.6 mm

Similar boards
- 4 layers30.2 × 32.7 mm

- 4 layers53.4 × 92.4 mm

Main revb
conol-ai/openwalkietalkie
OpenMicroDial firmware — Rust/embassy on SiFli SF32LB52 (LilyGo T-Display SF32 dev board)
142 parts3MIT - 4 layers68.6 × 53.3 mm

- 8 layers28 × 125 mm

Compact tablet
CopperPilot/tablet
An 8.4-inch tablet around a chip-down RK3566 + LPDDR4X: 8-layer 0.8 mm mainboard, USB-C daughter board, 1600x2560 dual-DSI display, CNC aluminium shell. Designed end to end by CopperPilot, open for review.
431 partsCERN-OHL-S-2.0 - 2 layers40 × 33 mm

- 4 layers30 × 30 mm

ReCamera 2002 S4 GC2053 Sensor Board V1.0 SCH&PCB 250905
Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.
83 parts495Apache-2.0 - 4 layers40 × 40 mm

- 2 layers95 × 95 mm

Questions
How big is the BsidesDSM26 PCB?
It measures 66.7 × 121 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BsidesDSM26 use?
91 parts, built around the CH585M, NS4150B, SK6812SIDE-A and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BsidesDSM26 KiCad files?
From the wrickert/UntitledElectronics repository on GitHub, at the commit this page was made from: the board is Badges/BsidesDSM26/Schematics/V2/BsidesDSM26.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BsidesDSM26 design in my own project?
Its repository states no licence, so its author keeps all rights: ask wrickert before reusing the design.