2 layers85.6 × 26 mm
Game boy pico link board
agtbaskara/game-boy-pico-link-board
An Open-Source USB to Gameboy Link Cable Adapter for Raspberry Pi Pico
6 parts51MIT
2 layers
1001Kit PCB
WPIRoboticsEngineering/1001Kit-PCB- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 177
- Pads
- 224
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 May 2019
- Updated
- 14 May 2019
Overview
1001Kit PCB is an open-source printed circuit board by WPIRoboticsEngineering, from the WPIRoboticsEngineering/1001Kit-PCB repository on GitHub. It is a 2-layer board with 7 parts on 177 nets.
It is built around the BOB-12009. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | MC33926-carrier | MC33926-Motor-Driver-Carrier:MC33926-Motor-Driver-Carrier | U2 |
| 1 | arduino-mega | mega:Arduino Mega | U3 |
| 1 | bob-12009 | bob12009:bob-12009 | U7 |
| 1 | esp-devkit | esp-devkit:ESP-DEVKIT | U1 |
| 1 | pi-display-conn | pi-display-conn:pi-display-header | U6 |
| 1 | polulu-3784-D36V28F7 | polulu-3784-dcdcreg:polulu-3784-D36V28F7 | U5 |
| 1 | stepper-module | stepper-module:stepper-module | U4 |
Questions
What parts does the 1001Kit PCB use?
7 parts, built around the BOB-12009. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 1001Kit PCB KiCad files?
From the WPIRoboticsEngineering/1001Kit-PCB repository on GitHub, at the commit this page was made from: the board is PCB/1001kit-pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 1001Kit PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask WPIRoboticsEngineering before reusing the design.
Similar boards
- 2 layers70 × 90 mm
- 2 layers76.7 × 35.1 mm
Weather station
VincentKobz/diy-weather-station
The goal is to build from scratch a small intelligent weather station that can be connected to IOT networks.
14 parts2MIT - 2 layers65 × 56 mm
- 2 layers39.5 × 30.5 mm
- 2 layers101.9 × 70 mm
Car LED Controller Schematic V9 - KiCAD
hselomein/Car-LED-Controller
This is a private repo for my car led project
27 parts1 - 2 layers60 × 30 mm
GPIO circuit
JhouLab/Pi5WebcamRecorder
Records MV4 AVI video files from up to 4 simultaneous USB webcams on Raspberry Pi 5
7 parts1 - 16 layers566.8 × 155.3 mm
Total
michelkeijzers/fraxis
This project's personal goal is to learn more about ESP32 with ESP-IDF programming.
106 parts1MIT