

D lev tuner
- Size
- 88.7 × 68.4 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 41
- Pads
- 144
- Tracks, vias
- 350, 57
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 11 Feb 2023
- Updated
- 17 Oct 2023
Overview
D lev tuner is an open-source printed circuit board by wormyrocks, from the wormyrocks/d-lev-mini repository on GitHub. It is a 4-layer board of 88.7 × 68.4 mm with 40 parts on 41 nets, routed with 350 tracks and 57 vias.
It is built around the STP08CP05M, AP2112K-3.3 and LTST-C250TBKT, with the LTST-S220TBKT, SMTSO-M3-2ET and S6B-PH-SM4-TB among its other parts. Its parts include 17 diodes, 8 capacitors, 5 ICs, 3 resistors and 1 connector.
Main components
6STP08CP05M
SOIC-16-40℃~+125℃ 100mA 20V 3% 30MHz 3V~5.5V 8 Built-in Over-Temperature Protection (OTP) SOIC-16 LED Drivers ROHSSTMicroelectronicsLED DriversAP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedLTST-C250TBKT
SMD,3.2x1.2mm104mcd 130° 20mA 3.3V 468nm 470nm Blue Water Clear SMD,3.2x1.2mm LED Indication - Discrete ROHSLite-OnLED Indication - DiscreteLTST-S220TBKT
SMD,2.2x1mm-20℃~+80℃ 104mcd 130° 20mA 3.3V 465nm~475nm 468nm 76mW Blue Discrete Diode Side View Mount Water Clear SMD,2.2x1mm LED Indication - Discrete ROHSLite-OnLED Indication - DiscreteSMTSO-M3-2ET
SMTSMT New Arrivals ROHSPEMUncategorisedS6B-PH-SM4-TB
--25℃~+85℃ 1 100V 15.9mm 1x6P 2A 2mm 5.5mm 6 6P 8.6mm Auxiliary Solder Pin Beige Copper alloy PA PH Surface Mount, Right Angle Tin UL94V-0 - Wire To Board Connector ROHSJSTWire To Board Connector
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | LTST-C250TBKT | d-lev:LED_1206_3216Metric_ReverseMount_Hole1.8x2.4mm | D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 4 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C6, C7, C8 |
| 4 | LTST-S220TBKT | d-lev:S220TBKT | D13, D14, D15, D17 |
| 4 | SMTSO-M3-2ET | d-lev:SMTSO-M3 | H1, H2, H3, H4 |
| 3 | 4.7k | Resistor_SMD:R_0603_1608Metric | R1, R4, R5 |
| 3 | STP08CP05 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U1, U2, U4 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C4, C5 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | DSM7TA56 | d-lev:DSM7TA56 | U5 |
| 1 | LOGO | LOGO | G*** |
| 1 | S6B-PH-SM4-TB | d-lev:JST_PH_S6B-PH-SM4-TB_1x06-1MP_P2.00mm_Horizontal | J1 |
The 39 most common of 40 parts.
More from wormyrocks/d-lev-mini
6- 4 layers125 × 50.1 mm

- 4 layers125 × 50.1 mm

- 4 layers175.3 × 163.3 mm

- 4 layers175.3 × 163.3 mm

- 2 layers65 × 60 mm

- 2 layers14.4 × 4.5 mm

Similar boards
- 2 layers160 × 238.5 mm

- 20 layers228.6 × 304.8 mm

- 2 layers56.4 × 56 mm

Ahp board
dglcinc/pivac
Python library to vacuum data from Raspberry-Pi-based monitoring and control solutions (like HVAC)
39 parts2 - 2 layers57.6 × 39.8 mm

Tk1-0805
kr-Eliza/tkey-open-hardware-reproduction
Reproducing the Tillitis TKey open hardware security key: 2-layer hand-solderable PCB, lab assembly and bring-up, Voltera prototype, SBOM
66 partsCERN-OHL-S-2.0 - 4 layers100 × 100 mm

Hw alpha
Yexall/CPE-450.Capstone
Fall 24 - Winter 25 Cal Poly Capstone project by Haas Hooligans. This projects aims to build a machine monitoring system for the Cal Poly IME department.
171 parts - 2 layers126.9 × 92 mm

- 2 layers62 × 42 mm

JoystickPCB
WheelchairSeniorDesign/PCBs
The PCB designs for the wheelchair for our senior design project
21 parts1 - 4 layers63.5 × 51.5 mm

LoRa breakout
alegoldstein/NUSTARS
Payload PCB for Northwestern University's 2025-2026 IREC rocket
9 parts
Questions
How big is the D lev tuner PCB?
It measures 88.7 × 68.4 mm and has 4 copper layers, 1.6 mm thick.
What parts does the D lev tuner use?
40 parts, built around the STP08CP05M, AP2112K-3.3, LTST-C250TBKT and LTST-S220TBKT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the D lev tuner KiCad files?
From the wormyrocks/d-lev-mini repository on GitHub, at the commit this page was made from: the board is d-lev-tuner/d-lev-tuner.kicad_pcb and its schematic d-lev-afe/d-lev-afe.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the D lev tuner design in my own project?
Its repository states no licence, so its author keeps all rights: ask wormyrocks before reusing the design.