

Eurocard based raspberry pi cluster (take 2)
- Size
- 160 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 2,056
- Nets
- 4
- Pads
- 2,174
- Tracks, vias
- 30, 75
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 11 Jul 2020
- Updated
- 22 Sep 2024
Overview
Kludge is an open-source printed circuit board by worlickwerx, from the worlickwerx/pi-cluster-two repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 160 × 100 mm with 2,056 parts on 4 nets, routed with 30 tracks and 75 vias.
README
hardware/kludge_panel_4hp/README.mdEurocard 4HP blank front panel
This is based on Marten Niec's "3U 4HP blanking DIN41612 with PCB mounting hole" v1.1 which is licensed under Creative Commons Atribution 4.0 International license CC-BY-4.0. See https://www.martenelectric.cz/
The hole pattern was adjusted to work with Elma S-216-13 eurocard lever.
Parts
2,056| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | MountingHole_2.7mm_M2.5_DIN965 | MountingHole:MountingHole_2.7mm_M2.5_DIN965 | MH1, MH2 |
The 2 most common of 2,056 parts.
More from worlickwerx/pi-cluster-two
5- 2 layers198.9 × 128.6 mm

- 4 layers159.9 × 99.9 mm

- 2 layers40 × 100.1 mm

- 2 layers65 × 74 mm

- 2 layers17.8 × 50.8 mm

Similar boards
- 2 layers190.8 × 193.4 mm

EasyC adapter
SolderedElectronics/qwiic-adapter-hardware-design
Hardware design, BOM, gerbers and 3D files for qwiic-adapter designed by Soldered Electronics.
2,044 parts2 - 2 layers177.4 × 211.6 mm

PMS7003 sensor adapter
SolderedElectronics/PMS7003-sensor-adapter-hardware-design
Hardware design, BOM, gerbers and 3D files for PMS7003-sensor-adapter designed by Soldered Electronics.
2,020 parts2 - 2 layers142.7 × 194.5 mm

SparkFun STC31 panelized
sparkfun/SparkFun_CO2_Sensor-STC31
A Qwiic breakout for the STC31 CO2 and SHTC3 Temperature and Humidity Sensors.
2,002 parts3 - 2 layers268.9 × 442.5 mm

- 2 layers92.4 × 100.5 mm

Panel
Envious-Data/Env-DIY305
A custom PCB implementation of the LTP305 as they are now discontinued.
2,114 parts2GPL-3.0 - 2 layers190.8 × 178.8 mm

IC LEVEL CONVERTER
SolderedElectronics/Logic-level-converter-generic-TXB0104-breakout-hardware-design
Hardware design, BOM, gerbers and 3D files for Logic-level-converter-generic-TXB0104-breakout designed by Soldered Electronics.
1,988 parts - 2 layers

- 2 layers168.4 × 217.2 mm

PCB breadboard
SolderedElectronics/PCB-breadboard-protoboard-hardware-design
Hardware design, BOM, gerbers and 3D files for PCB-breadboard-protoboard designed by Soldered Electronics.
2,144 parts1
Questions
How big is the Kludge PCB?
It measures 160 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Kludge use?
2,056 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kludge KiCad files?
From the worlickwerx/pi-cluster-two repository on GitHub, at the commit this page was made from: the board is hardware/kludge/kludge.kicad_pcb and its schematic hardware/kludge/kludge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kludge design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).