
EasyC adapter
SolderedElectronics/qwiic-adapter-hardware-design
Hardware design, BOM, gerbers and 3D files for qwiic-adapter designed by Soldered Electronics.

Hardware design, BOM, gerbers and 3D files for qwiic-adapter designed by Soldered Electronics.
EasyC adapter is an open-source printed circuit board by SolderedElectronics, from the SolderedElectronics/qwiic-adapter-hardware-design repository on GitHub. It is a 2-layer board of 190.8 × 193.4 mm with 2,044 parts on 4 nets, routed with 3,264 tracks and 680 vias.
It belongs with the interfaces and adapters boards of this library.
Do you have an old I2C board lying around that would be perfect only if it had qwiic connectors? With the qwiic adapter and a little bit of soldering, you can give it new life. It will be able to connect easily to newer boards with qwiic cables.
The adapter has two qwiic connection ports and four plated through-holes: SCL, SDA, 3.3V, and GND. It comes with pins that need to be soldered to the board.
This repository contains all design files for qwiic adapter, organized as follows:
CAD folder: Contains KiCAD design files, including:
OUTPUTS folder: Includes all production-ready files, such as:
.step file of the boardRefer to the Change Log in the CAD folder for details about updates between versions.
Beyond the repository, explore the following resources:
The Soldered Verify system ensures every board you purchase from Soldered is fully functional. It also provides access to exclusive test data for your product. To get started, find the unique Soldered Verify ID on your product's packaging and enter the ID on the Soldered Verify page to access test results and additional product details.
Soldered Community is your go-to place for technical support. Our engineers track and answer all questions posted there, and it’s a great space for the maker community. Get answers to your questions and solutions for your challenges at Soldered Community.
solde.red is an ultimate URL shortener and information hub. Access it by typing solde.red/ followed by your product SKU, e.g., solde.red/333000, to find getting-started guides, datasheets, open-source hardware and software files, certifications, images, pinouts, and more. Read more about the shortener here.
Contributions are welcome! Here’s how you can get involved:
We encourage community collaboration to make this product even better.
Soldered for Makers specializes in designing and manufacturing electronic products tailored for enthusiasts, ranging from hobbyists to professionals. Our portfolio includes electronic boards, sensors, and actuators that are widely utilized in fields such as microelectronics, mechatronics, robotics, programming, and IoT. Every product we offer is designed in-house and built upon open-source hardware and software platforms. Proudly certified and manufactured within the European Union, our catalog likely includes the product you need for your project.
We complement these products with comprehensive tutorials and manuals, product descriptions, schematics, programming codes, and project examples. Our round-the-clock customer and technical support is available for all our products, irrespective of the sales channel. Soldered’s success and services reflect our maker community’s unwavering trust, for which we are deeply grateful. Join our community and create using Soldered products.
All Soldered open-source hardware (OSH) is under The TAPR Open Hardware License. Read more in the LICENSE file located in this repository.
Disclaimer:
No warranty - all designs in this repository are distributed in the hope that they will be useful, but without any warranty. They are provided "AS IS", therefore without warranty of any kind, either expressed or implied. The entire quality and performance of what you do with the contents of this repository are your responsibility. In no event Soldered Electronics will be liable for your damages, or losses, including any general, special, incidental, or consequential damage arising out of the use or inability to use the contents of this repository.
Thank you for your support from your fellow makers at Soldered Electronics.
Happy Making!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 680 | buzzardLabel | , , , , , , , , , , , , , , , +664 | |
| 272 | LOGO | Soldered Graphics:Logo-Front-easyC-5mm | G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** +256 |
| 272 | easyC-SMD | e-radionica.com footprinti:easyC-connector | K1, K1, K1, K1, K1, K1, K1, K1, K1, K1, K1, K1, K1, K1, K1, K1 +256 |
| 140 | FIDUCIAL | e-radionica.com footprinti:FIDUCIAL_23 | FD1, FD1, FD1, FD1, FD1, FD1, FD1, FD1, FD1, FD1, FD1, FD1, FD1, FD1, FD1, FD1 +124 |
| 136 | HEADER_MALE_4X1 | e-radionica.com footprinti:HEADER_MALE_4X1 | K3, K3, K3, K3, K3, K3, K3, K3, K3, K3, K3, K3, K3, K3, K3, K3 +120 |
| 136 | LOGO | Soldered Graphics:Logo-Back-OSH-3.5mm | G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** +120 |
| 136 | LOGO | Soldered Graphics:Logo-Front-Soldered-3mm | G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** +120 |
The 1,772 most common of 2,044 parts.

SolderedElectronics/qwiic-adapter-hardware-design
Hardware design, BOM, gerbers and 3D files for qwiic-adapter designed by Soldered Electronics.

SolderedElectronics/qwiic-adapter-hardware-design
Hardware design, BOM, gerbers and 3D files for qwiic-adapter designed by Soldered Electronics.


SolderedElectronics/PMS7003-sensor-adapter-hardware-design
Hardware design, BOM, gerbers and 3D files for PMS7003-sensor-adapter designed by Soldered Electronics.

sparkfun/SparkFun_CO2_Sensor-STC31
A Qwiic breakout for the STC31 CO2 and SHTC3 Temperature and Humidity Sensors.

SolderedElectronics/Logic-level-converter-generic-TXB0104-breakout-hardware-design
Hardware design, BOM, gerbers and 3D files for Logic-level-converter-generic-TXB0104-breakout designed by Soldered Electronics.



Envious-Data/Env-DIY305
A custom PCB implementation of the LTP305 as they are now discontinued.

SolderedElectronics/Color---gesture-sensor-APDS-9960-breakout-hardware-design
Hardware design, BOM, gerbers and 3D files for Color-&-gesture-sensor-APDS-9960-breakout designed by Soldered Electronics.
It measures 190.8 × 193.4 mm and has 2 copper layers, 1.6 mm thick.
2,044 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SolderedElectronics/qwiic-adapter-hardware-design repository on GitHub, at the commit this page was made from: the board is CAD/V1.1.1/PANEL/easyC_adapter.kicad_pcb and its schematic CAD/V1.0.0/easyC_adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask SolderedElectronics before reusing the design.