Skip to the content
2 layers95.4 × 62.4 mmPetpad, the printed circuit board in 3D
Size
95.4 × 62.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
26
Pads
104
Tracks, vias
88, 2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
1 Jul 2026
Updated
9 Jul 2026

Overview

Petpad is an open-source printed circuit board by wooze-pao, from the wooze-pao/petpad repository on GitHub. It is a 2-layer board of 95.4 × 62.4 mm with 26 parts on 26 nets, routed with 88 tracks and 2 vias.

Its parts include 12 diodes, 12 switches, 1 IC and 1 connector.

README

README.md

The petpad

  • petpad is a 12-key macropad with a rotary encoder, built around the Seeed XIAO RP2040 microcontroller. I will use it for daliy shortcut. like Copy etc.

Renders

  • case Case
  • pcb PCB PCB

PCB Design

  • Uses matrix scanning circuit with 12 1N4148 diodes to prevent ghosting key

BOM

ComponentQty
XIAO RP20401
Rotary Encoder1
Cherry MX Switches12
PCB1
Diodes (1N4148)12
M3x8 Bolt4

Parts

26
QtyValueFootprintReferences
121N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D3, D5, D6, D7, D8, D9, D10, D11, D12, D13
11SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12
1Conn_01x04KiCad-SSD1306-0.91-OLED-4pin-128x32:SSD1306-0.91-OLED-4pin-128x32J1
1MOUDLE-SEEEDUINO-XIAOfootprints:XIAO-Generic-Hybrid-14P-2.54-21X17.8MMU1
1RotaryEncoder_SwitchRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW17

Similar boards

  • 2 layers57.3 × 19 mm11ua, the printed circuit board in 3D

    11ua

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    26 parts990GPL-3.0
  • 2 layers98 × 59.5 mmMCP23017 PCB, the printed circuit board in 3D

    MCP23017 PCB

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    26 parts915
  • 2 layers142.9 × 98.5 mmCantor MX, the printed circuit board in 3D

    Cantor MX

    diepala/cantor

    Cantor keyboard, a 42 key diodeless split keyboard.

    26 parts756GPL-3.0
  • 2 layers103.8 × 50 mmGalagino pcb set, the printed circuit board in 3D

    Galagino pcb set

    harbaum/galagino

    A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32

    26 parts558
  • 2 layers20.3 × 34.8 mmL0 ESP32, the printed circuit board in 3D

    L0 ESP32

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    26 parts546MIT
  • 2 layers40.6 × 50.8 mmWALTsm, the printed circuit board in 3D

    WALTsm

    google/walt

    A device for measuring latency of physical sensors and outputs on phones and computers

    26 parts474Apache-2.0
  • 2 layers158.5 × 75 mmDoj v2, the printed circuit board in 3D

    Doj v2

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    26 parts463

Questions

How big is the Petpad PCB?

It measures 95.4 × 62.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Petpad use?

26 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Petpad KiCad files?

From the wooze-pao/petpad repository on GitHub, at the commit this page was made from: the board is PCB/petpad.kicad_pcb and its schematic PCB/petpad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Petpad design in my own project?

Its repository states no licence, so its author keeps all rights: ask wooze-pao before reusing the design.