Skip to the content
2 layers149.9 × 105.5 mmMusubi rev2, the printed circuit board in 3D

Super thin 38 key split keyboard using Kailh X switches

Size
149.9 × 105.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
50
Nets
34
Pads
636
Tracks, vias
469, 2
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
7 Jan 2023
Updated
23 Jan 2023

Overview

Musubi rev2 is an open-source printed circuit board by wontaeyang, from the wontaeyang/musubi repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 149.9 × 105.5 mm with 50 parts on 34 nets, routed with 469 tracks and 2 vias.

Its parts include 19 diodes, 19 switches, 1 IC and 1 connector. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.

README

README.md

Musubi - Super thin 38 key split keyboard

Musubi-angle

Musubi is a 38 key split keyboard using Kailh X switches and Seeeduino Xiao. This keyboard started with dust keyboard as a base and adjusted with customized layout and design elements from my favorite keyboards.

Currently there are two versions of the keyboard
  • V1 (white)
    • a lot more index and pinky column stagger
    • Totem like thumb cluster
  • V2 (red)
    • less aggressive column staggers
    • thumb cluster is extended out
    • TRRS socket location moved
    • double puck mount for wider design
Musubi-angle

Features

  • Reversible PCB
  • Column stagger with splay
  • 3x5 layout with 4 additional keys (three thumb, 1 pinky)
  • Slim build ( measured from keycap to bottom )
    • without case 6.7 mm
    • with case 9.7 mm
  • Tenting puck support
Musubi-side

BOM

Base keyboard:

  • Seeeduino Xiao RP2040 (2)
  • Musubi PCB (2)
  • Kailh X switches (38)
  • Kailh X switch keycaps (38)
  • Diodes - 1N4148W (38)
  • TRRS Jack - PJ 320A 3.5mm (2)
  • TRRS cable (1)

Optional parts:

  • Musubi case (2, optional)
    • M2 4mm screw (8)
    • M2 nuts - 4mm wide, 1.6mm tall (8)
    • Tenting pucks (2, optional)
    • Manfrotto Pocket Tripod (2, optional)
    • Rubber feet (optional without tenting pucks)

Keyboard design files

V1 files

V2 files

Firmware

Musubi's firmware is a modified copy of Dilemma's VIA keymap. If you want to just flash the keyboard with default keymap, put the Xiaos in to bootloader mode and copy the included UF2 file

text
// For Macs
cp -X ./firmware/musubi_default.uf2 /Volumes/RPI-RP2

For those who wish to customize, clone this repo and symlink Musubi firmware to QMK Firmware

text
ln -s ./firmware/musubi /{your_qmk_firmware_base_location}/qmk_firmware/keyboards/musubi

Adjust the layout and compile/copy the UF2 file into Xiao

text
qmk compile -kb musubi -km default
cp -X ./firmware/musubi_default.uf2 /Volumes/RPI-RP2

License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Parts

50
QtyValueFootprintReferences
19D_SmallDEF01:diode-reversibleD1, D2, D3, D4, D5, D6, D10, D11, D12, D13, D14, D15, D17, D18, D19, D20 +3
19SW_Push_45degDEF01:Kailh-PG1425-X-Switch-reversSW1, SW2, SW3, SW4, SW5, SW6, SW10, SW11, SW12, SW13, SW14, SW15, SW17, SW18, SW19, SW20 +3
2G***kibuzzard-63C260F0kibuzzard-63C260F0, kibuzzard-63C260F0
2G***kibuzzard-63ADF2C0kibuzzard-63ADF2C0, kibuzzard-63ADF2C0
1AudioJack4DEF01:TRRS-PJ-320A-dualJ1
1xiao-bleDEF01:xiao-rev-reversibleU1

The 44 most common of 50 parts.

Similar boards

  • 2 layers187.2 × 26.6 mmBlade12, the printed circuit board in 3D

    Blade12

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    50 parts3.7k
  • 2 layers45.7 × 25.9 mmAccessory, the printed circuit board in 3D

    Accessory

    usbarmory/usbarmory

    USB armory - The open source compact secure computer

    50 parts1.5k
  • 2 layers21 × 31.5 mmK1-aioc, the printed circuit board in 3D

    K1-aioc

    skuep/AIOC

    Ham Radio All-in-one-Cable

    50 parts1.4kMIT
  • 2 layers42 × 32.5 mmLipoboard, the printed circuit board in 3D

    Lipoboard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    50 parts915
  • 2 layers101 × 31.5 mmManagement, the printed circuit board in 3D

    Management

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    50 parts397Apache-2.0
  • 2 layers123.9 × 94.4 mmRoba R, the printed circuit board in 3D

    Roba R

    kumamuk-git/roBa

    50 parts363GPL-3.0
  • 2 layers50 × 25 mmMbus master, the printed circuit board in 3D

    Mbus master

    roarfred/AmsToMqttBridge

    Minimalistic system to read AMS/HAN data from electrical meter

    50 parts223

Questions

How big is the Musubi rev2 PCB?

It measures 149.9 × 105.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Musubi rev2 use?

50 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Musubi rev2 KiCad files?

From the wontaeyang/musubi repository on GitHub, at the commit this page was made from: the board is PCB/musubi_rev2.kicad_pcb and its schematic PCB/musubi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Musubi rev2 design in my own project?

Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).