

WolfSTM32-Demo
wolfSSL examples for STM32
- Size
- 111.1 × 135.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 71
- Nets
- 76
- Pads
- 310
- Tracks, vias
- 554, 50
- Pours
- 358
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 17 Sep 2024
- Updated
- 16 Oct 2026
Overview
WolfSTM32-Demo is an open-source printed circuit board by wolfSSL, from the wolfSSL/wolfssl-examples-stm32 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 111.1 × 135.6 mm with 71 parts on 76 nets, routed with 554 tracks and 50 vias.
It is built around the CH340C, AMS1117-3.3 and MMBT3904. Its parts include 18 capacitors, 17 resistors, 11 diodes, 5 connectors and 4 transistors. It belongs with the STM32 boards of this library.
Main components
3CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdwolfSSL Examples for STM32
- STM32H743_Nucleo_ETH: wolfSSL TLS with TPM example
- STM32F446ZE_Nucleo_PQ: wolfSSL Post-Quantum example, this is a pointer to another repository
- STM32MP135F-DK: wolfSSL echoclient example using FreeRTOS and LwIP
- wolfDemo: A demonstration board designed around an STM32U585 with multiple examples
Parts
71| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | LED | Project:SunLED | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10 |
| 9 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C6, C7, C8, C9, C11, C16, C17, C18 |
| 5 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R13, R14, R15, R16 |
| 4 | 680 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9, R10, R11 |
| 4 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C14, C15 |
| 3 | SW_Push | Button_Switch_SMD:SW_SPST_EVQP2_ShortPushTravel_H2.1mm | SW1, SW2, SW4 |
| 2 | 20p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | 4.3p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12, C13 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7 |
| 1 | 1 | Project:MIKROBUS_HOST_CONN | J3 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 2 | Project:MIKROBUS_HOST_CONN | J4 |
| 1 | 20 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 27nH | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | 32.768K | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | 33 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 47 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 8MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y3 |
| 1 | 91 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J5 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030-NL | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J1 |
| 1 | FerriteBead | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | FB1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D11 |
| 1 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17 |
| 1 | STM32U585CITx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW3 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J2 |
The 70 most common of 71 parts.
More from wolfSSL/wolfssl-examples-stm32
1- 2 layers25.4 × 28.6 mm

Similar boards
- 2 layers81.3 × 72.9 mm

- 2 layers90 × 60 mm

- 2 layers120 × 90 mm

PLC STM32 Modbus
danhmanu/PLC-STM32F407VET6
Mạch nguyên lý KiCad 10 cho bộ PLC: điều khiển qua LAN bằng Modbus TCP (module W5500 Lite), nạp code qua USB‑C (CH340C), 16 ngõ ra transistor cách ly quang, 10 ngõ vào analog 4–20mA.
264 parts - 2 layers84 × 66 mm

Pomodoro timer v5 routed
hinewboy/pomodoro-timer
番茄钟 PCB 项目(KiCad):原理图、布局布线自动化脚本、JLCPCB 打样生产文件
46 partsMIT - 2 layers100 × 100 mm

Hour meter board microfit can handroute
ilomon10/embedded-totalizer-hour-meter
ESP32 engine hour meter & totalizer: firmware, SensorFrame protocol, Node host tools, KiCad PCB and a Deno device simulator
152 parts - 2 layers114 × 105 mm

Smell monitor v1 1
OpenSmell/smell-monitor
The enclosure is the simple one a builder can hold in their head: an open tray, a board on four standoffs, modules plugged into eight headers, a flat lid with four M3 screws, a filter pad that drops into the front, and…
64 parts - 2 layers130 × 164 mm

- 2 layers126.2 × 25.5 mm

Universal Programmer
TiebeDeclercq/Uart-programmer
A versatile UART programming board designed for microcontroller development with flexible voltage selection and multiple connection options.
46 partsMIT
Questions
How big is the WolfSTM32-Demo PCB?
It measures 111.1 × 135.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the WolfSTM32-Demo use?
71 parts, built around the CH340C, AMS1117-3.3 and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WolfSTM32-Demo KiCad files?
From the wolfSSL/wolfssl-examples-stm32 repository on GitHub, at the commit this page was made from: the board is wolfDemo/wolfDemo_STM32U585/wolfSTM32-Demo.kicad_pcb and its schematic wolfDemo/wolfDemo_ST33/wolfDemo-STSAFE.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the WolfSTM32-Demo design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).