
Pumper
wolf-yuan-6115/lightwolf
Pumper is an experimental RP2354-based USB Audio Class 2 DAC. The board uses a PCM5102A DAC with OPA1652 and OPA1622 analog stages in a compact design intended for learning about USB audio and DAC hardware.

Pumper is an experimental RP2354-based USB Audio Class 2 DAC. The board uses a PCM5102A DAC with OPA1652 and OPA1622 analog stages in a compact design intended for learning about USB audio and DAC hardware.
Feather is an open-source printed circuit board by wolf-yuan-6115, from the wolf-yuan-6115/lightwolf repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 61.4 × 38.8 mm with 153 parts on 114 nets, routed with 1,133 tracks and 378 vias.
It is built around the RP2354A, LM27762DSS and TPD1E10B06DPYR, with the 1TS015A-1400-0600-CT, 0603L075SLYR and AOTA-B201610S3R3-101-T among its other parts. Its parts include 55 resistors, 48 capacitors, 13 diodes, 11 ICs and 4 switches. It belongs with the microcontroller boards boards and the RP2350 boards of this library.
Pumper is an experimental RP2354-based USB Audio Class 2 DAC. The board uses a PCM5102A DAC with OPA1652 and OPA1622 analog stages in a compact design intended for learning about USB audio and DAC hardware.
The firmware provides a ten-band parametric EQ, headphone crossfeed, output processing, USB host volume and mute, and persistent EQ profiles. Settings can be controlled from either the React WebHID controller or the native Android controller. Both controllers preview edits live and save persistent settings only through explicit save actions.
Pumper accepts stereo PCM over USB Audio Class 2 in the following formats:
| Sample rate | 16-bit stereo | Packed 24-bit stereo |
|---|---|---|
| 44.1 kHz | Yes | Yes |
| 48 kHz | Yes | Yes |
| 88.2 kHz | Yes | Yes |
| 96 kHz | Yes | Yes |
| 176.4 kHz | Yes | No |
| 192 kHz | Yes | No |
Audio packets cross from the USB-facing core into the real-time DSP core through a fixed block pool. After processing, ping-pong DMA feeds the PIO I2S transmitter; the analog stages then filter, buffer, attenuate, and drive the headphone output.
flowchart TB
HOST[USB host<br/>UAC2 stereo PCM]
subgraph DIGITAL[Digital audio path]
direction LR
USB[TinyUSB on RP2354 core 0<br/>receive and decode USB packets]
QUEUE[Fixed audio-block queue<br/>core 0 to core 1]
EQ[Preamp and<br/>10-band parametric EQ]
XF[Headphone crossfeed]
HOSTCTL[USB host<br/>gain and mute]
OUTPROC[Output processing<br/>balance, mono, and width]
LIMIT[Always-on<br/>stereo limiter]
PACK[Final PCM quantization<br/>and I2S packing]
I2S[Ping-pong DMA and PIO<br/>I2S transmitter]
DAC[PCM5102A<br/>I2S DAC]
USB --> QUEUE --> EQ --> XF --> HOSTCTL --> OUTPROC --> LIMIT --> PACK --> I2S --> DAC
end
subgraph ANALOG[Analog audio path]
direction LR
FILTER[Passive output filters]
BUFFER[OPA1652<br/>stereo buffer]
VOLUME[Dual-gang analog<br/>volume control]firmware/ — RP2354 firmware and portable host tests.web/ — React/TypeScript WebHID controller.android/ — experimental Android USB-host controller.assets/ — board and assembled-device images.The firmware requires the Pico SDK, CMake, Ninja, a native C compiler, and the
Arm GNU embedded toolchain. See firmware/README.md for
SDK setup, supported audio formats, flashing, and troubleshooting.
export PICO_SDK_PATH="${HOME}/Projects/pico-sdk"
cmake -S firmware -B firmware/build -G Ninja \
-DCMAKE_BUILD_TYPE=Release \
-DPICO_BOARD=pico2 \
-DPICO_PLATFORM=rp2350-arm-s \
-DPICO_FLASH_SIZE_BYTES=2097152
cmake --build firmware/build --target rp2350_usb_dac -jFlash firmware/build/rp2350_usb_dac.uf2 using the RP2354 BOOTSEL drive.
Use a Chromium-based browser. WebHID works on a secure origin and on
http://localhost.
cd web
pnpm install
pnpm devSee web/README.md for Linux HID permissions, tests,
production builds, previewing, and deployment.
The Android controller requires JDK 17 and Android SDK API 37. Android Studio
can open android/ directly.
cd android
./gradlew testDebugUnitTest lintDebug assembleDebugSee android/README.md for the debug simulator and USB
device requirements.
These tests do not require the Pico SDK:
cmake -S firmware/tests -B /tmp/pumper-firmware-tests
cmake --build /tmp/pumper-firmware-tests
ctest --test-dir /tmp/pumper-firmware-tests --output-on-failure


| Item | Cost |
|---|---|
| PCB shipping | $6.12 |
| PCB assembly | $86.18 |
| PCB | $11.43 |
| Total | $103.73 |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 34 | 1kΩ | PCM_JLCPCB:R_0402 | R10, R11, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32, R34, R35, R36, R37 +18 |
| 26 | 100nF | PCM_JLCPCB:C_0402 | C1, C2, C3, C21, C23, C24, C25, C26, C27, C28, C29, C30, C31, C32, C34, C38 +10 |
| 14 | LOGO | LOGO | G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** |
| 8 | TPD1E10B06DPYR | TPD1E10B06DPYR:DIO_TPD1E10B06DPYR | D6, D7, D8, D9, D10, D11, D12, D13 |
| 5 | 10kΩ | PCM_JLCPCB:R_0402 | R5, R18, R19, R20, R21 |
| 4 | 10kΩ | PCM_JLCPCB:R_0603 | R12, R13, R15, R16 |
| 4 | 10uF | PCM_JLCPCB:C_0402 | C7, C8, C11, C13 |
| 4 | 1TS015A-1400-0600-CT | easyeda2kicad:SW-SMD_L3.0-W2.0-LS3.5 | SW1, SW2, SW3, SW4 |
| 4 | 1uF | PCM_JLCPCB:C_0402 | C4, C12, C15, C16 |
| 4 | 4.7uF | PCM_JLCPCB:C_0402 | C10, C19, C22, C33 |
| 3 | OPA1612AxD | Package_SON:WSON-8-1EP_3x3mm_P0.5mm_EP1.2x2mm_ThermalVias | U5, U7, U8 |
| 3 | OPA1622 | Package_SON:Texas_S-PVSON-N10_ThermalVias | U9, U10, U11 |
| 2 | 100kΩ | PCM_JLCPCB:R_0402 | R33, R51 |
| 2 | 120kΩ | PCM_JLCPCB:R_0603 | R4, R6 |
| 2 | 15pF | PCM_JLCPCB:C_0402 | C37, C40 |
| 2 | 2.2uF | PCM_JLCPCB:C_0402 | C5, C17 |
| 2 | 2.2uF | PCM_JLCPCB:C_0603 | C6, C20 |
| 2 | 27Ω | PCM_JLCPCB:R_0603 | R17, R22 |
| 2 | 330kΩ | PCM_JLCPCB:R_0603 | R3, R9 |
| 2 | 4.7nF | PCM_JLCPCB:C_0402 | C14, C18 |
| 2 | 4.7uF | PCM_JLCPCB:C_0603 | C35, C36 |
| 2 | 5.1kΩ | PCM_JLCPCB:R_0402 | R1, R2 |
| 2 | TLV76733DRVx | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalVias | U1, U4 |
| 2 | Yellow | PCM_JLCPCB:D_0603 | D4, D5 |
| 2 | ~ | PCM_JLCPCB:Hole_Tooling_JLCPCB | H1, H2 |
| 1 | 0603L075SLYR | Fuse:Fuse_0603_1608Metric | F1 |
| 1 | 12MHz | PCM_JLCPCB:OSC-SMD_4P-L3.2-W2.5-BL_SIT8008BI | X1 |
| 1 | 330Ω | PCM_JLCPCB:R_0402 | R41 |
| 1 | 33Ω | PCM_JLCPCB:R_0402 | R14 |
| 1 | AOTA-B201610S3R3-101-T | easyeda2kicad:IND-SMD_L2.0-W1.6_AOTA-B201610S3R3-101-T | L1 |
| 1 | Blue | PCM_JLCPCB:D_0603 | D3 |
| 1 | Connector, USB-TYPE-C-16P | PCM_JLCPCB:TYPE-C-SMD_HX-TYPE-C-16PIN | J1 |
| 1 | GT-3321667P-01 | easyeda2kicad:AUDIO-TH_GT-3321667P-01 | CN2 |
| 1 | LM27762 | Package_SON:WSON-12-1EP_3x2mm_P0.5mm_EP1x2.65_ThermalVias | U2 |
| 1 | RP2354A | Package_DFN_QFN:QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm_ThermalVias | U6 |
| 1 | Red | PCM_JLCPCB:D_0603 | D2 |
| 1 | ST-0337D00-071-1A2H | easyeda2kicad:AUDIO-TH_ST-0337D00-071-1A2H | CN1 |
| 1 | TAD5242IRGER | TAD5242IRGER:IC_TAD5242IRGER | U3 |
| 1 | TPD2E001DZDR | TPD2E001DZDR:SOT192P237X122-4N | D1 |

wolf-yuan-6115/lightwolf
Pumper is an experimental RP2354-based USB Audio Class 2 DAC. The board uses a PCM5102A DAC with OPA1652 and OPA1622 analog stages in a compact design intended for learning about USB audio and DAC hardware.

wolf-yuan-6115/lightwolf
Pumper is an experimental RP2354-based USB Audio Class 2 DAC. The board uses a PCM5102A DAC with OPA1652 and OPA1622 analog stages in a compact design intended for learning about USB audio and DAC hardware.

SethTheDev/Resonance
A powerful STM32F411-based USB audio interface rocking a Cirrus Logic DAC with DSP



ErdemHtyl/Tulpar_Mini_FCB
This project is under active development. The table below shows what is finished and what is still in progress:

DennisSchulmeister/ModularMusicController
Open Modular Music Controller – Build your own custom hardware controller

michael-michelotti/canary
Raspberry Pi air quality HAT with a custom Linux IIO kernel driver for the Sensirion SGP40.


BelaPlatform/gliss-hardware
You can find the source KiCad files for the Gliss module in this repository. This project is open hardware and under the Creative Commons Share Alike license 4.0.
It measures 61.4 × 38.8 mm and has 4 copper layers, 1.6 mm thick.
153 parts, built around the RP2354A, LM27762DSS, TPD1E10B06DPYR and 1TS015A-1400-0600-CT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the wolf-yuan-6115/lightwolf repository on GitHub, at the commit this page was made from: the board is feather/feather.kicad_pcb and its schematic 2350/lightwolf.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).