
Current
wojtek-00/HomeAutomation
A modular home automation system built around ESPHome, custom PCB design (KiCad), and 3D-printed enclosures.

A modular home automation system built around ESPHome, custom PCB design (KiCad), and 3D-printed enclosures.
Controller board is an open-source printed circuit board by wojtek-00, from the wojtek-00/HomeAutomation repository on GitHub. It is a 2-layer board of 45 × 85 mm with 31 parts on 50 nets, routed with 243 tracks and 115 vias.
It is built around the ESP32-S3-WROOM-1-N8, TSR 1-2450E and AMS1117-3.3. Its parts include 8 capacitors, 8 connectors, 7 resistors, 3 ICs and 2 switches. It belongs with the ESP32 boards of this library.
A modular home automation system built around ESPHome, custom PCB design (KiCad), and 3D-printed enclosures.
The project is designed to be scalable, allowing multiple independent hardware modules (controller + expanders) that integrate into a single automation system.
The project is split into two main domains:
Contains all physical devices and their design artifacts:
Each hardware module is self-contained.
system_controller – main brain of the systemrelay_expander – relay output module (8 outputs + 8 inputs)Contains software and logic:
This layer defines how devices behave, not how they are built.
Each hardware module follows the same structure:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R5, R6, R7 |
| 3 | 22uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C7, C8 |
| 2 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C6 |
| 2 | 5.1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4 |
| 1 | 1,1A, PTC | Fuse:Fuse_BelFuse_0ZRE0033FF_L11.4mm_W3.8mm | F1 |
| 1 | 100 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
| 1 | 22uF | Capacitor_Tantalum_SMD:CP_EIA-6032-15_Kemet-U | C2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | BOOT | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW2 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J5 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J11 |
| 1 | Conn_01x05_Socket | Connector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J6 |
| 1 | Conn_01x05_Socket | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J3 |
| 1 | Conn_01x07_Pin | templates_lib_footprints:PinSocket_1x07_P2.54mm_Horizontal_Right | J12 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | Jumper_2_Bridged | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | Jumper_3_Open | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP2 |
| 1 | RESET | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J4 |
| 1 | TSR1-2450E | Converter_DCDC:Converter_DCDC_TRACO_TSR1-xxxxE_THT | U5 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |

wojtek-00/HomeAutomation
A modular home automation system built around ESPHome, custom PCB design (KiCad), and 3D-printed enclosures.

wojtek-00/HomeAutomation
A modular home automation system built around ESPHome, custom PCB design (KiCad), and 3D-printed enclosures.

wojtek-00/HomeAutomation
A modular home automation system built around ESPHome, custom PCB design (KiCad), and 3D-printed enclosures.

wojtek-00/HomeAutomation
A modular home automation system built around ESPHome, custom PCB design (KiCad), and 3D-printed enclosures.

wojtek-00/HomeAutomation
A modular home automation system built around ESPHome, custom PCB design (KiCad), and 3D-printed enclosures.

wojtek-00/HomeAutomation
A modular home automation system built around ESPHome, custom PCB design (KiCad), and 3D-printed enclosures.


Ayan-nova/Design-of-a-Raspberry-PICO-Iot-Device-on-4-Layer-PCB-Design-With-Sensor-And-More
Design a Raspberry Pi Pico W-based Industrial IoT Gateway and Edge Controller using Kicad software.

baloghr/usonic
KiCad 9 project gp2026 (hardware revision 1.01): schematic, PCB, custom footprints (Library.pretty) and 3D models (packages3D).

ismailEngineer/omniwheel-robot
a small protoype to educate the control system of 3 OmniWheel Robot


Unimakers/CDR-2027
Ce repo est un site de documentation réalisé par l'équipe des première et deusième années pré-ingénieur de l'école Unilasalle-Amiens, membre de l'association de robotique Unimaker, dans le cadre de leur participation à…


It measures 45 × 85 mm and has 2 copper layers, 1.6 mm thick.
31 parts, built around the ESP32-S3-WROOM-1-N8, TSR 1-2450E and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the wojtek-00/HomeAutomation repository on GitHub, at the commit this page was made from: the board is hardware/system_controller/current/pcb/controller_board/controller_board.kicad_pcb and its schematic hardware/relay_expander/current/pcb/boards_connector/boards_connector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask wojtek-00 before reusing the design.