Skip to the content
2 layers21.6 × 58.4 mmLeds, the printed circuit board in 3D

Re-usable test jig controller

Size
21.6 × 58.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
41
Nets
27
Pads
112
Tracks, vias
295, 32
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
15 Nov 2021
Updated
5 Feb 2024

Overview

Leds is an open-source printed circuit board by wntrblm, from the wntrblm/Hubble repository on GitHub. It is a 2-layer board of 21.6 × 58.4 mm with 41 parts on 27 nets, routed with 295 tracks and 32 vias.

It is built around the LM358. Its parts include 16 diodes, 8 capacitors, 8 resistors, 4 ICs and 4 connectors.

Main components

1

README

README.md

Hubble

Hubble is Winterbloom's re-usable development board for test jigs.

Repository layout

This repository contains the hardware design files and firmware files for Hubble.

  • firmware/ contains the firmware source code, build scripts, and third-party dependencies. The firmware is written in C using GCC ARM.
  • hardware/ contains the hardware design files for the mainboard, jackboard, panel, and programming board. These are all created using KiCAD.
  • mechanical/ contains various designs for laser-cut and 3d-printed parts used to modify the stock test jig assembly for Hubble.

License and contributing

Hubble is open-source hardware and software, however, licensing a project like this is a little complicated. Please take a chance to review the LICENSE file.

We welcome contributions! Please read our Contributing Guide and Code of Conduct.

Parts

41
QtyValueFootprintReferences
80.1uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C2, C3, C4, C5, C6, C7, C8
81kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2, R3, R4, R5, R6, R7, R8
8NEGLED_THT:LED_D3.0mmD3, D4, D7, D8, D11, D12, D15, D16
8POSLED_THT:LED_D3.0mmD1, D2, D5, D6, D9, D10, D13, D14
4LM358Package_SO:TSSOP-8_4.4x3mm_P0.65mmU1, U2, U3, U4
1L1Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ3
1L2Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ4
1LOGOwinterbloom:Extra_Long_Wiggly_Boi_25mmG***
1R1Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ5
1R2Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ6

More from wntrblm/Hubble

9
  • 4 layers114 × 120 mmHubble, the printed circuit board in 3D

    Hubble

    wntrblm/Hubble

    Re-usable test jig controller

    335 parts23
  • 2 layers100 × 100 mmIo lens.pcb, the printed circuit board in 3D

    Io lens.pcb

    wntrblm/Hubble

    Re-usable test jig controller

    40 parts23
  • 2 layers27.1 × 24 mm12 bit analog out, the printed circuit board in 3D

    12 bit analog out

    wntrblm/Hubble

    Re-usable test jig controller

    31 parts23
  • 2 layers27.1 × 24 mm16 bit analog out, the printed circuit board in 3D

    16 bit analog out

    wntrblm/Hubble

    Re-usable test jig controller

    30 parts23
  • 2 layers50.8 × 38.7 mmPower, the printed circuit board in 3D

    Power

    wntrblm/Hubble

    Re-usable test jig controller

    29 parts23
  • 2 layers26.9 × 68.6 mmMcu, the printed circuit board in 3D

    Mcu

    wntrblm/Hubble

    Re-usable test jig controller

    27 parts23
  • 2 layers27.1 × 18.5 mmAnalog in buffers, the printed circuit board in 3D

    Analog in buffers

    wntrblm/Hubble

    Re-usable test jig controller

    24 parts23
  • 2 layers21.5 × 26.5 mmMux, the printed circuit board in 3D

    Mux

    wntrblm/Hubble

    Re-usable test jig controller

    11 parts23
  • 2 layers26.7 × 27.9 mmJacks, the printed circuit board in 3D

    Jacks

    wntrblm/Hubble

    Re-usable test jig controller

    6 parts23

Similar boards

  • 2 layers132.1 × 45.7 mmIPoS, the printed circuit board in 3D

    IPoS

    peterheinrich/InternetOverSpaghetti

    Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

    42 parts342
  • 2 layers68.8 × 53.6 mmZArduino, the printed circuit board in 3D

    ZArduino

    zmaker/arduino_cookbook

    gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

    46 parts269
  • 2 layers152 × 88 mmRFBitBangSMT, the printed circuit board in 3D

    RFBitBangSMT

    profdc9/RFBitBanger

    A QRP digital transceiver created from readily available parts for off-the-grid maintenance

    271 parts222
  • 2 layers118 × 103.5 mmEV Charger2, the printed circuit board in 3D

    EV Charger2

    fotherja/EV_Charger

    Arduino Uno Code for EV Charger

    62 parts167MIT
  • 2 layers113 × 62.2 mmFullScope, the printed circuit board in 3D

    FullScope

    tvlad1234/pillScopePlus

    Oscilloscope based around the STM32F401 Black Pill and a color LCD screen

    15 parts165Apache-2.0
  • 2 layers75.2 × 61.1 mmHelios, the printed circuit board in 3D

    Helios

    Grix/helios_dac

    Helios Laser DAC

    102 parts132
  • 2 layers144.1 × 182.2 mmSHVC CPU-01, the printed circuit board in 3D

    SHVC CPU-01

    starlightk7/OpenSFC

    OSHW Reproduction Parts related to the Super Famicom / Super Nintendo game console

    498 parts114CERN-OHL-S-2.0
  • 2 layers100 × 85 mmVNA, the printed circuit board in 3D

    VNA

    profdc9/VNA

    Vector Network Analyzer based on the STM32F103C8T6 bluepill

    178 parts93

Questions

How big is the Leds PCB?

It measures 21.6 × 58.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Leds use?

41 parts, built around the LM358. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Leds KiCad files?

From the wntrblm/Hubble repository on GitHub, at the commit this page was made from: the board is hardware/breakouts/leds/leds.kicad_pcb and its schematic hardware/board/analog-ins-low-voltage.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Leds design in my own project?

Its repository states no licence, so its author keeps all rights: ask wntrblm before reusing the design.