4 layers114 × 65 mm
2 layers64.9 × 35.5 mm
Rm3100Remote
wittend/rm3100RemoteOSHW (TAPR License) remote magnetometer support board design
- Size
- 64.9 × 35.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 30
- Pads
- 147
- Tracks, vias
- 394, 43
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 19 Oct 2023
- Updated
- 19 Oct 2023
Overview
Rm3100Remote is an open-source printed circuit board by wittend, from the wittend/rm3100Remote repository on GitHub. It is a 2-layer board of 64.9 × 35.5 mm with 53 parts on 30 nets, routed with 394 tracks and 43 vias.
It is built around the LM1117-3.3, PCA9615DPJ and M2.5, with the MMDL914 among its other parts. Its parts include 13 resistors, 11 capacitors, 5 ICs, 4 connectors and 1 diode.
Main components
4
LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
PCA9615DPJ
TSSOP-10-3mmTSSOP-10-3mm Signal Buffers, Repeaters, Splitters ROHSNXP SemiconductorsSignal Buffers, Repeaters, SplittersM2.5
-0.45mm 2.5mm 2mm 5mm DIN934 Hex M2.5X0.45 Nickel plated Silver white - Hexagonal nutsShuntianHex Nut
MMDL914
SOD-323-55℃~+150℃ 100V 1V@10mA 200mA 2A 5uA@75V Independent SOD-323 Diodes - General Purpose ROHSJiangsu Changjing Electronics Technology (CJ)Diodes - General Purpose
README
README.mdrm3100Remote
OSHW (TAPR License) remote magnetometer support board design
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uf | Capacitor_SMD:C_0603_1608Metric | C1, C2, C4, C5, C6, C7, C8 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R7, R8, R9, R12, R13 |
| 4 | 390 | Resistor_SMD:R_0603_1608Metric | R1, R3, R4, R6 |
| 4 | M2.5 | MountingHole:MountingHole_2.5mm | MK1, MK2, MK3, MK4 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R2, R5 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R10, R11 |
| 2 | sj2 | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP6, JP7 |
| 2 | sj2 | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP8, JP9 |
| 1 | 1.0uf | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 1000pf | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 10uf | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 2.2uf | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | A0 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | A1 | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP2 |
| 1 | A2 | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP3 |
| 1 | AP2210N-3.0 | Base_Folder:SOT95P280X145-3N | U5 |
| 1 | Ferrite bead 600 ohm | Digikey_Footprints:0603 | FB1 |
| 1 | JST-SH4 Qwiic | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J6 |
| 1 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP1 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | LOGO | Local Logos:HamSci_bSilk | G*** |
| 1 | LittleFuse 2920L125 | Fuse:Fuse_0805_2012Metric | F1 |
| 1 | MCP9808_MSOP | Package_SO:MSOP-8_3x3mm_P0.65mm | U1 |
| 1 | MMDL914 | Diode_SMD:D_SOD-523 | D1 |
| 1 | PCA9615DPJ | Base_Folder:TSSOP-10_3x3mm_P0.5mm | U2 |
| 1 | PNI-RM3100mag | Base_Folder:PinSocket_PNI_RM3100 | U3 |
| 1 | RJ45_Shielded | Connector_RJ:RJ45_Amphenol_RJHSE5380 | J1 |
| 1 | SA0 | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP4 |
| 1 | SA1 | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP5 |
| 1 | SJ_0pen | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP10 |
| 1 | TAPR | Local Logos:tapr_logo_bSilk_transp_10x12 | TAPR Logo |
| 1 | Test Points | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J4 |
The 52 most common of 53 parts.
Questions
How big is the Rm3100Remote PCB?
It measures 64.9 × 35.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rm3100Remote use?
53 parts, built around the LM1117-3.3, PCA9615DPJ, M2.5 and MMDL914. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rm3100Remote KiCad files?
From the wittend/rm3100Remote repository on GitHub, at the commit this page was made from: the board is rm3100Remote.kicad_pcb and its schematic rm3100Remote.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rm3100Remote design in my own project?
Its repository states no licence, so its author keeps all rights: ask wittend before reusing the design.
Similar boards
- 4 layers30 × 21 mm
Vl53l1x breakout
kemfic/vl53l1x-breakout
vl53l1x-breakout --- NOTE: needs a PCA9615 on master side to convert differential i2c back to i2c. will post another breakout for this soon.
37 parts - 2 layers45 × 35 mm
Wiimote USB Adapter
Embedded-Shark-LLC/Wiimote-USB-Adapter
Wiimote USB adapter for native controller support on PCs
20 parts - 2 layers40.9 × 85 mm
Studio mic
Spirit532/studio_mic
A simple, easy to build preamplifier for any true condenser capsule, to make a condenser microphone
63 parts150MIT - 2 layers65 × 56 mm
- 2 layers65 × 56 mm
ClumsyMIDI
gmcn42/clumsyMIDI
A THT-only Raspberry Pi expansion board containing a MIDI interface, DAC, and OLED display
26 parts90CC-BY-SA-4.0 - 6 layers203 × 151.8 mm
PDNode Baseboard
DvidMakesThings/HW_PDNode-600-Pro
The PDNode-600 is a professional-grade, 600W USB Power Delivery Unit designed specifically for compact 10-inch rack systems, targeting embedded developers, homelab enthusiasts, test benches, and smart infrastructure.
236 parts86AGPL-3.0 - 4 layers60 × 127 mm
