4 layers157.5 × 91.4 mm
Asutp kicad source mirror kit dev coldfire xilinx 5213
oomlout/oomlout_oomp_project_bot_v_2
162 parts
2 layers
STM32CAN
witoldo7/STM32CAN5Trionic 5, 7, 8 flasher interface.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 105
- Pads
- 243
- Tracks, vias
- 332, 23
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 13 Feb 2022
- Updated
- 15 Jan 2026
Overview
STM32CAN is an open-source printed circuit board by witoldo7, from the witoldo7/STM32CAN repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board with 50 parts on 105 nets, routed with 332 tracks and 23 vias.
It is built around the PCA82C251T, L9637D and MAX6675ISA+, with the MP2303ADN, B130-E3 and SM6T18A among its other parts. Its parts include 16 resistors, 14 capacitors, 5 ICs, 4 diodes and 3 connectors. It belongs with the STM32 boards of this library.
Main components
6
PCA82C251T
SOP-8-40℃~+125℃ 1 12uA 1Mbps 4.5V~5.5V 70mA CAN Transceiver Low-power mode、Wake-up function、ESD protection、Thermal shutdown protection、Short-Circuit Protection SOP-8 CAN Transceivers ROHSTokmasCAN Transceivers
L9637D
SOP-8SOP-8 Interface - Specialized ROHSSTMicroelectronicsInterface - Specialized
MAX6675ISA+
SOIC-8-20℃~+85℃ 3V~5.5V SPI SOIC-8 Interface - Specialized ROHSMaxim Integrated (Analog Devices)Interface - Specialized
MP2303ADN
-UncategorisedMonolithic Power Systems
B130-E3
SMA(DO-214AC)-65℃~+125℃ 1 Independent 1A 200uA@30V 30A 30V 520mV@1A SMA(DO-214AC) Schottky Diodes ROHSVishay IntertechnologySchottky Diodes
SM6T18A
SMB(DO-214AA)-55℃~+150℃ 123A@8/20us 17.1V 18V 200nA 32.5V 4kW@8/20us IEC 61000-4-2、IEC 61000-4-5 TVS Unidirectional SMB(DO-214AA) ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
README
Readme.mdSTM32CAN - WQCAN
The idea of the project is to provide CAN and BDM functionality for Saab Trionic 8 ECU.
Currently supported:
- CombiBeckend - For CAN operation work fine.
- SocketCAN - Most of the driver impl is done.
- can0: CAN2.0/FDCAN - various speed can be defined, loop back, one shoot, listen only, FD mode, FD_NON_ISO, TDC_AUTO
- can1: SWCAN - 33.3k and 83.3k, loop back, one shoot, listen only.
- TODO: BERR_REPORTING
- SAE J2534 - Support for Windows and Linux.
- ISO14230: Tested with Tech2Win and Saab 9-5 DICE,
- ISO15765: Tested with GenericDiagnosticTool, OpenVehicleDiag and Trionic8 ECU, SW_ISO15765_PS on pin1,
- CAN: Tested with TrionicCanFlasher, Txloger. Read T8 ECU flash time: 38s ;)
TODO
- BDM - Needs rework.
License
Apache2
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5, C9, C10, C11, C12, C13, C14 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R11, R12 |
| 3 | 6.8k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R15, R16 |
| 2 | 100k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6, R8 |
| 2 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R9 |
| 2 | 510R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R13, R14 |
| 2 | Q_NPN_BCE | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1, Q2 |
| 1 | 100n | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1 |
| 1 | 100p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 1 | 10n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7 |
| 1 | 10u | Inductor_SMD:L_7.3x7.3_H3.5 | L2 |
| 1 | 120R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 2.7k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 22uf | Capacitor_SMD:C_2220_5650Metric_Pad1.97x5.40mm_HandSolder | C8 |
| 1 | 3.3V | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D4 |
| 1 | 3.9n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C6 |
| 1 | 4.7u | Capacitor_SMD:CP_Elec_4x4.5 | C2 |
| 1 | 44.2k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10 |
| 1 | 47p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4 |
| 1 | 47uH | Inductor_SMD:L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L1 |
| 1 | 6.49k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | B130-E3 | Diode_SMD:D_SMA | D2 |
| 1 | Conn_02x11_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x11_P2.54mm_Horizontal | J3 |
| 1 | D | Diode_SMD:D_1210_3225Metric_Pad1.42x2.65mm_HandSolder | D3 |
| 1 | J2 | Connector_PinHeader_2.54mm:PinHeader_2x22_P2.54mm_Vertical | J1 |
| 1 | J3 | Connector_PinHeader_2.54mm:PinHeader_2x22_P2.54mm_Vertical | J2 |
| 1 | L9637D | Package_SO:SO-8_5.3x6.2mm_P1.27mm | IC1 |
| 1 | MAX6675 | Package_SO:SO-8_5.3x6.2mm_P1.27mm | U4 |
| 1 | MC33897 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U1 |
| 1 | MP2303ADN | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.62x3.51mm | U3 |
| 1 | PCA82C251 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | SM6T18A | Diode_SMD:D_SMB | D1 |
Similar boards
- 2 layers80.1 × 56.9 mm
- 2 layers115.2 × 78.6 mm
- 2 layers35.6 × 40.6 mm
- 2 layers65 × 53 mm
Kline l9637d
quangvd917/ab125-kline
Bản mới của kline-l9637d: C3 SuperMini cắm thẳng lên mạch qua rào cái, không còn giắc J2. PCB một mặt, kích thước 70 × 38 mm, để tự làm. Firmware dùng env c3supermini như cũ, không phải sửa.
23 parts2 - 2 layers26 × 45 mm
Freesk8-Robogotchi v1.5
FreeSK8/FreeSK8-Robogotchi-Hardware
Hardware repository for FreeSK8 Robogotchi
32 parts19 - 2 layers82 × 82 mm
- 2 layers53.8 × 53.1 mm
Obd32
mkrasselt1/obd32
Anyone is free to join our goal to make the hardware reliable and affordable.
79 parts4
Questions
What parts does the STM32CAN use?
50 parts, built around the PCA82C251T, L9637D, MAX6675ISA+ and MP2303ADN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32CAN KiCad files?
From the witoldo7/STM32CAN repository on GitHub, at the commit this page was made from: the board is hardware/board.kicad_pcb and its schematic hardware/board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32CAN design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).