
Aeroq Hardware v3
EnriqueNeyra/Aeroq
An Indoor Air Quality Monitor Powered by ESP32, SCD40, and SEN54

Open-source color e-ink name badge — hardware, firmware, and companion software.
Badge is an open-source printed circuit board by wisdom-km, from the wisdom-km/chroma-badge repository on GitHub. It is a 2-layer board of 91 × 84 mm with 58 parts on 63 nets, routed with 680 tracks and 115 vias.
It is built around the ESP32-C3-MINI-1-N4, TP4054 and XC6220B331MR-G, with the MBR0530, AO3401A and SI1308EDL among its other parts. Its parts include 21 capacitors, 15 resistors, 5 diodes, 4 ICs and 3 connectors. It belongs with the lEDs and displays and radio and wireless boards and the ESP32 and RISC-V boards of this library.
当前: 状态 · 交接 · 流程(许可证 / CI / 贴胶 / 生产包)。2026-09-14 复审是旧 564 段板档案,不要当现板。
仓库:https://github.com/wisdom-km/chroma-badge
一块 6.3 mm 厚的电子工牌:4.2" 黑白红黄四色墨水屏 + ESP32-C3(Wi-Fi/BLE/原生 USB)+ ST25DV64KC NFC + ≤2 mm 超薄锂电 + USB-C。固件目前是 v0.2 上电自检;手机传图(F2)未写。
| 背面 PCB 渲染 | 外壳(FreeCAD) |
|---|---|
![]() | 见 hardware/enclosure/output/badge_assembly.step |
git clone https://github.com/wisdom-km/chroma-badge.git
cd chroma-badge用 Cursor 打开这个文件夹(本地 Agent)。根目录 AGENTS.md 和 .cursor/rules/badge.mdc 会带上约定。
LICENSE.md:硬件 CERN-OHL-P-2.0,固件/脚本 MITAGENTS.md:硬性约定与当前进度docs/01-architecture-decisions.md:选型docs/02-bom-and-cost.md:BOM;屏贴胶 3M 467MPdocs/03-handoff.md:复现步骤与当前板指纹docs/09-process.md:CI、生产包、贴胶hardware/pcb/:由 scripts/design.py 生成firmware/README.md:v0.2 自检;不要覆盖 output/badge-42c-v0.1*.bin全量 ERC/DRC 需要 KiCad 10.0.6。不要把 gen_pcb.py 当日常命令(会清布线)。日常检查:
cd hardware/pcb
python3 scripts/check_netlist.py
./scripts/export.sh --check-only自动布线流程见 docs/03-handoff.md 第 3 节。
H2(2026-09-15): 58 封装,PCB 680 段 / 115 过孔,J1.7 NC。KiCad 10.0.6 全量 ERC/DRC 0。USB 0.8 mm。固件 v0.2 F1。没有生产 zip。
下一步:打样实机;F2 须选定一条传图路线。
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1u | Capacitor_SMD:C_0402_1005Metric | C8, C10, C13, C14 |
| 4 | 1u/25V | Capacitor_SMD:C_0603_1608Metric | C18, C19, C20, C21 |
| 3 | 100n | Capacitor_SMD:C_0402_1005Metric | C5, C7, C9 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R7, R8, R10 |
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric | C3, C6, C12 |
| 3 | 1M | Resistor_SMD:R_0402_1005Metric | R5, R6, R15 |
| 3 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C4 |
| 3 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3 |
| 3 | MBR0530 | Diode_SMD:D_SOD-123 | D1, D2, D3 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R4, R9 |
| 2 | 1u/50V | Capacitor_SMD:C_0805_2012Metric | C16, C17 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R11, R12 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 2.2R | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | 4.7u/25V | Capacitor_SMD:C_0805_2012Metric | C15 |
| 1 | 47uH | Inductor_SMD:L_Changjiang_FNR4018S | L1 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | BATT JST-SHL 1.0mm | badge:JST_SHL_SM02B-SHLS-TF_1x02-1MP_P1.00mm_Horizontal | J2 |
| 1 | BOOT/USER | Button_Switch_SMD:SW_SPST_PTS810 | SW2 |
| 1 | DNP | Capacitor_SMD:C_0402_1005Metric | C11 |
| 1 | EPD FPC 24P 0.5mm | Connector_FFC-FPC:Hirose_FH12-24S-0.5SH_1x24-1MP_P0.50mm_Horizontal | J1 |
| 1 | ESP32-C3-MINI-1-N4 | badge:ESP32-C3-MINI-1 | U1 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | PCB loop 35x41.5mm 11T | badge:NFC_Loop | ANT1 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
| 1 | ST25DV64KC-IER6S3 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Si1308EDL | badge:SOT-323_SC-70 | Q1 |
| 1 | TP4054 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | USB-C 16P 沉板 (TYPE-C-31-M-14) | badge:TYPE-C-31-M-14 | J3 |
| 1 | VBAT | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | V_EH | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | XC6220B331MR-G | Package_TO_SOT_SMD:SOT-23-5 | U4 |

EnriqueNeyra/Aeroq
An Indoor Air Quality Monitor Powered by ESP32, SCD40, and SEN54

EnriqueNeyra/aether
All-in-one home air quality monitor measuring Temp, Humidity, CO2, VOCs, Particulate Matter, and NOx. Powered by ESP32-C3 running esphome, and built with Home Assistant integration





DanielYJHsieh/esp32c3
取代 Good Display DESPI-C02(41 × 22 mm)的小型轉接板:直接疊在 ESP32-C3 Super Mini 背面,驅動 24pin SPI 電子紙(目前用 GDEQ0426T82,SSD1677)。

wisdom-km/color-eink-work-badge
Color e-ink work badge (彩色墨水屏工牌). P36 3.6-inch six-color 400x600 portrait badge.
It measures 91 × 84 mm and has 2 copper layers, 0.8 mm thick.
58 parts, built around the ESP32-C3-MINI-1-N4, TP4054, XC6220B331MR-G and MBR0530. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the wisdom-km/chroma-badge repository on GitHub, at the commit this page was made from: the board is hardware/pcb/badge.kicad_pcb and its schematic hardware/pcb/badge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask wisdom-km before reusing the design.