2 layers
LM80C R6
leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO
153 parts123GPL-3.0
2 layers3.7 × 3.6 mm
Atverter Fly
WillSoar21/Flyback_AtverterE1A place to store files for the KiCad schematics and PCB's.
- Size
- 3.7 × 3.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 60
- Nets
- 106
- Pads
- 292
- Tracks, vias
- 5, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 May 2025
- Updated
- 10 Oct 2025
Overview
Atverter Fly is an open-source printed circuit board by WillSoar21, from the WillSoar21/Flyback_AtverterE repository on GitHub. It is a 2-layer board of 3.7 × 3.6 mm with 60 parts on 106 nets, routed with 5 tracks and 0 vias.
It is built around the ATMEGA328P-PU, 74HC02 and IRF540N. Its parts include 10 capacitors, 4 diodes, 3 resistors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)74HC02
-- Logic Gates ROHSonsemiLogic Gates
IRF540N
TO-2201 N-channel 1.35nF 100V 130W 280pF 33A 35mΩ@10V 4V 52nC@10V 85pF N-Channel TO-220 MOSFETs ROHSOSENMOSFETs
README
README.mdFlyback_AtverterE
A place to store files for the KiCad schematics and PCB's.
Each time you make a change to the schematic/PCB, update what you changed in the text log. MAKE A COPY each time you edit the schem/PCB and increase the revision number by one.
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 5u | Capacitor_SMD:C_0805_2012Metric | Cin2, Cin3, Cout2, Cout3, Cout4 |
| 4 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C2, C5, C8, C10 |
| 4 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | I_InHeader1, I_outHeader1, PowGNDs1, SignGNDs1 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | RDTR1, RsenL_2 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C7, C9 |
| 2 | 120k | Resistor_SMD:R_0805_2012Metric | RsenH_1, RsenL_1 |
| 2 | 1n | Capacitor_SMD:C_0805_2012Metric | C3, C6 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | CDTR1, CSup1 |
| 2 | 22pF | Capacitor_SMD:C_0201_0603Metric | COsc1, COsc2 |
| 2 | ACS712xLCTR-05B | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | I_Sensor1, I_Sensor2 |
| 2 | D | Package_TO_SOT_SMD:TO-252-3_TabPin2 | D1, D2 |
| 2 | LED_Dual_AKA | FlybackSpecialtyComps:LED_3pin_P2.54mm | D3, D4 |
| 2 | R_Network05 | Resistor_THT:R_Array_SIP6 | RN1, RN3 |
| 2 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | GND_Vin(+)1, Vout(+)_GND1 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | RGate1 |
| 1 | 0.1 | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R2 |
| 1 | 10V Regulator | FlybackSpecialtyComps:UC2836 | UC3836D1 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | RsenH_2 |
| 1 | 10u | Capacitor_SMD:CP_Elec_5x4.5 | Cin1 |
| 1 | 110 | Resistor_SMD:R_0805_2012Metric | Rsnub1 |
| 1 | 15u | Capacitor_SMD:CP_Elec_5x4.5 | Cout1 |
| 1 | 2.5k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 30u | Capacitor_SMD:C_1206_3216Metric | C4 |
| 1 | 30u | Capacitor_SMD:CP_Elec_6.3x7.7 | C11 |
| 1 | 4n | Capacitor_SMD:C_0805_2012Metric | Csnub1 |
| 1 | 5V Regulator | FlybackSpecialtyComps:Max6765 | MAX6765 |
| 1 | 74HC02 | Package_DIP:DIP-14_W7.62mm_LongPads | U4 |
| 1 | 7500 | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | ASCO | FlybackSpecialtyComps:oscillator | Xtal_Osc1 |
| 1 | ATmega328P-P | Package_DIP:DIP-28_W7.62mm | ATmega1 |
| 1 | Conn_01x01_Pin | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | TestVcc1 |
| 1 | Conn_01x01_Pin | Connector_JST:JST_XH_B1B-XH-AM_1x01_P2.50mm_Vertical | TestGate1 |
| 1 | Conn_01x06_Male | FlybackSpecialtyComps:FTDI_USB_TTL_Header | Header1 |
| 1 | IRF540N | Package_TO_SOT_THT:TO-220-3_Vertical | MOSFET1 |
| 1 | PLACEHOLDER | OptoDevice:Everlight_ITR8307 | U1 |
| 1 | R_Pack04_SIP | Resistor_THT:R_Array_SIP8 | RN2 |
| 1 | Raspberry_Pi_2_3 | FlybackSpecialtyComps:Raspberry_Pi_Zero_and_Four | RPi1 |
| 1 | TC4426xOA | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | GateDriver1 |
| 1 | Transformer_1P_1S | FlybackSpecialtyComps:transformers | T1 |
Questions
How big is the Atverter Fly PCB?
It measures 3.7 × 3.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Atverter Fly use?
60 parts, built around the ATMEGA328P-PU, 74HC02 and IRF540N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Atverter Fly KiCad files?
From the WillSoar21/Flyback_AtverterE repository on GitHub, at the commit this page was made from: the board is Flyback Designs/Flyback_PCBs/r4 Atverter_Fly/Atverter_Fly.kicad_pcb and its schematic Flyback Designs/Flyback_PCBs/r1 Atverter_Fly/Atverter_Fly.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Atverter Fly design in my own project?
Its repository states no licence, so its author keeps all rights: ask WillSoar21 before reusing the design.
Similar boards
- 2 layers83.8 × 94.6 mm
- 2 layers102.5 × 200 mm
- 2 layers130 × 110 mm
- 2 layers245.1 × 160 mm
8-Bit CPU 32k
slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.
139 parts326 - 2 layers191.8 × 121.3 mm
8-Bit CPU 32k
slu4coder/Minimal-UART-Computer-1-2
Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed
109 parts184 - 2 layers203.2 × 149.9 mm
- 2 layers86 × 54 mm
