
M2 card
williamyang98/oculink_m2_adapter
Custom M.2 oculink adapter for Ideapad Pro 5 - 16ARP8

Custom M.2 oculink adapter for Ideapad Pro 5 - 16ARP8
Oculink m2 is an open-source printed circuit board by williamyang98, from the williamyang98/oculink_m2_adapter repository on GitHub. It is a 4-layer board of 104.7 × 113.2 mm with 18 parts on 54 nets, routed with 1,099 tracks and 1,511 vias.
It is built around the G14A42121B12HR. Its parts include 5 capacitors, 2 diodes, 1 resistor and 1 connector. It belongs with the computers and single-board computers boards of this library.
kicad/oculink_m2_flex_connector/ for the final design of taper.python ./generate_tapers.pypython ../run_simulations.pypython ../find_optimum_diffpair.py| Filepath | Description |
|---|---|
variants_simulation/base | Original simulation files |
variants_simulation/variants.csv | Stores list of variants |
variants_simulation/variants/*/images/*_debug.png | Stores debug images of taper variant |
variants_optimum_diffpair | Stores S-parameter and Smith chart plots of taper variants |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | D_Schottky | Diode_SMD:D_SOD-523 | D2 |
| 1 | G14A42121B12HR | amphenol_oculink:AMPHENOL_G14A42121B12HR | J1 |
| 1 | JMP_3.3V_EXT | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | JMP_PEDET | custom_edge_connector:3pin_4state_jumper | JP1 |
| 1 | JMP_PEWAKE | custom_edge_connector:3pin_4state_jumper | JP3 |
| 1 | M2_MOUNT | custom_edge_connector:m2_ground_hole | H1 |
| 1 | MOUNT_1 | custom_edge_connector:secondary_mounting_hole | H2 |
| 1 | MOUNT_2 | custom_edge_connector:secondary_mounting_hole | H3 |
| 1 | Power LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | TP_GND_1 | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | TP_GND_2 | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | ~ | custom_edge_connector:m2_m_key | E1 |

williamyang98/oculink_m2_adapter
Custom M.2 oculink adapter for Ideapad Pro 5 - 16ARP8

williamyang98/oculink_m2_adapter
Custom M.2 oculink adapter for Ideapad Pro 5 - 16ARP8

williamyang98/oculink_m2_adapter
Custom M.2 oculink adapter for Ideapad Pro 5 - 16ARP8

williamyang98/oculink_m2_adapter
Custom M.2 oculink adapter for Ideapad Pro 5 - 16ARP8


nanographs/Open-Beam-Interface
Just what you need to control the beam and get an image.




khill25/Dreamdrive
Open source Retro Rom Carts and ODEs by Dreamcraft Industries

mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project

It measures 104.7 × 113.2 mm and has 4 copper layers, 0.78 mm thick.
18 parts, built around the G14A42121B12HR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the williamyang98/oculink_m2_adapter repository on GitHub, at the commit this page was made from: the board is kicad/oculink_m2_single/oculink_m2.kicad_pcb and its schematic kicad/oculink_m2_flex_connector/flex_pcb/flex_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask williamyang98 before reusing the design.