Skip to the content
PCBKitNew board
2 layers86.4 × 43.2 mmAtmega2560, the printed circuit board in 3D

Atmega2560

wickerbox/Basic-Breakout-Boards10

Proving out wickerlib templates and reference circuits.

Open in PCBKitView on GitHub.kicad_pcb
Size
86.4 × 43.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
29
Nets
83
Pads
227
Tracks, vias
44, 1
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
13 Aug 2016
Updated
15 Oct 2017

Overview

Atmega2560 is an open-source printed circuit board by wickerbox, from the wickerbox/Basic-Breakout-Boards repository on GitHub. It is a 2-layer board of 86.4 × 43.2 mm with 29 parts on 83 nets, routed with 44 tracks and 1 via.

Its parts include 10 capacitors, 9 connectors, 3 diodes, 2 ICs and 1 resistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.

README

sd-micro-pushpull-0475710001-breakout/README.md

Micro SD Connector (0475710001) Breakout Board v1.0

Breadboard- and 3V/5V-compatible micro SD breakout board.

Updated: 24 Feb 2017

  • Author: Jenner Hanni
  • Website: http://wickerbox.net
  • Company: Wickerbox Electronics
  • License: CERN Open Hardware License v1.2

Assembled

Schematic

Bill of Materials

RefQtyDescriptionDigikey PN
C2 C32CAP CER 0.1UF 100V X7R 0603490-3285-1-ND
C4 C12CAP CER 1UF 25V X7R 0603587-2984-1-ND
J11HEADER MALE 6POS TH 1x06 0.1”952-1902-ND
J21CONN MICRO SD CARD PUSH-PULLWM9731CT-ND
U11IC REG LDO 3.3V 0.15A SOT353576-3193-1-ND
U21IC VOLT-LEVEL TRANSLATOR TXB0104 SOIC14296-21928-1-ND

Assembly Diagram

Gerber Preview

Parts

29
QtyValueFootprintReferences
6100nFWickerlib:RLC-0603-SMDC2, C6, C7, C8, C9, C10
210uF 25VWickerlib:RLC-1210-SMDC1, C3
220V 1AWickerlib:DIODE-SMAD2, D3
222pFWickerlib:RLC-0603-SMDC4, C5
2HEADER-FEMALE-16POS-TH-1x16-P0.1INWickerlib:CONN-HEADER-STRAIGHT-P2.54MM-1x16J5, J6
11.1A 25VWickerlib:RLC-1812-SMDF1
110KWickerlib:RLC-0805-SMDR2
114VWickerlib:DIODE-SMAD1
116MHz 18pFWickerlib:CRYSTAL-CTS-4SMDX1
1ANALOG PINSWickerlib:CONN-HEADER-STRAIGHT-P2.54MM-1x16J4
1ATMEGA2560Wickerlib:TQFP-100-14x14MM-P0.5MMU2
1BARREL JACKWickerlib:CONN-BARREL-JACK-2.5x5.5MM-THJ8
1FTDIWickerlib:CONN-HEADER-STRAIGHT-P2.54MM-1x06J2
1HEADER-FEMALE-7POS-TH-1x07-P0.1INWickerlib:CONN-HEADER-STRAIGHT-P2.54MM-1x07J9
1I/OWickerlib:CONN-HEADER-STRAIGHT-P2.54MM-1x14J7
1INPUTWickerlib:CONN-ONSHORE-SCREW-GREEN-2PIN-THJ1
1ISP-2560Wickerlib:CONN-HEADER-STRAIGHT-P2.54MM-2x03J3
1JUMPWickerlib:CONN-HEADER-STRAIGHT-P2.54MM-1x02JP1
1NCP1117-5VWickerlib:DPAKU1
1RESETWickerlib:SWITCH-OMRON-MOMENTARY-SMD-B3U-1000PS1

Questions

How big is the Atmega2560 PCB?

It measures 86.4 × 43.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Atmega2560 use?

29 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Atmega2560 KiCad files?

From the wickerbox/Basic-Breakout-Boards repository on GitHub, at the commit this page was made from: the board is atmega2560/atmega2560.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Atmega2560 design in my own project?

Its repository states no licence, so its author keeps all rights: ask wickerbox before reusing the design.

More from wickerbox/Basic-Breakout-Boards

12
  • 2 layers48.1 × 36.8 mmAtsamd21g18-breakout, the printed circuit board in 3D

    Atsamd21g18-breakout

    wickerbox/Basic-Breakout-Boards

    Proving out wickerlib templates and reference circuits.

    28 parts10
  • 2 layers35.6 × 48.3 mmAtmega328, the printed circuit board in 3D

    Atmega328

    wickerbox/Basic-Breakout-Boards

    Proving out wickerlib templates and reference circuits.

    26 parts10
  • 2 layers27.9 × 27.9 mmMcp73871-battery mgmt breakout, the printed circuit board in 3D

    Mcp73871-battery mgmt breakout

    wickerbox/Basic-Breakout-Boards

    Proving out wickerlib templates and reference circuits.

    19 parts10
  • 2 layers43.2 × 21.6 mmStns01-battery mgmt breakout, the printed circuit board in 3D

    Stns01-battery mgmt breakout

    wickerbox/Basic-Breakout-Boards

    Proving out wickerlib templates and reference circuits.

    19 parts10
  • 2 layers43.2 × 27.9 mmFgpmmopa6h gps breakout, the printed circuit board in 3D

    Fgpmmopa6h gps breakout

    wickerbox/Basic-Breakout-Boards

    Proving out wickerlib templates and reference circuits.

    15 parts10
  • 2 layers26.9 × 30 mmMpu9250-breakout, the printed circuit board in 3D

    Mpu9250-breakout

    wickerbox/Basic-Breakout-Boards

    Proving out wickerlib templates and reference circuits.

    14 parts10
  • 2 layers40.6 × 16.5 mmAvr programmer, the printed circuit board in 3D

    Avr programmer

    wickerbox/Basic-Breakout-Boards

    Proving out wickerlib templates and reference circuits.

    13 parts10
  • 2 layers44.5 × 29.2 mmSd full-2041021-4-breakout, the printed circuit board in 3D

    Sd full-2041021-4-breakout

    wickerbox/Basic-Breakout-Boards

    Proving out wickerlib templates and reference circuits.

    8 parts10
  • 2 layers13.8 × 11.7 mmMma7660-sensor breakout, the printed circuit board in 3D

    Mma7660-sensor breakout

    wickerbox/Basic-Breakout-Boards

    Proving out wickerlib templates and reference circuits.

    6 parts10
  • 2 layers7.6 × 20.3 mmNeopixel ws2812b breakout, the printed circuit board in 3D

    Neopixel ws2812b breakout

    wickerbox/Basic-Breakout-Boards

    Proving out wickerlib templates and reference circuits.

    4 parts10

Similar boards

  • 2 layers52.3 × 10.5 mmStackLink, the printed circuit board in 3D

    StackLink

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    29 parts5.1kGPL-3.0
  • 2 layers56 × 20 mmHallEffectXY Endstop, the printed circuit board in 3D

    HallEffectXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    29 parts1.1kGPL-3.0
  • 2 layers50 × 23.2 mmAnalog, the printed circuit board in 3D

    Analog

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    29 parts1kGPL-3.0
  • 2 layers16.8 × 13.6 mmE Fidget Lite, the printed circuit board in 3D

    E Fidget Lite

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    29 parts915
  • 2 layers85 × 12.5 mmTERES PCB3-TOUCH BTN Rev.A, the printed circuit board in 3D

    TERES PCB3-TOUCH BTN Rev.A

    OLIMEX/DIY-LAPTOP

    Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

    29 parts578Apache-2.0
  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 2 layers80 × 55 mmGB CARTPP XC, the printed circuit board in 3D

    GB CARTPP XC

    Gekkio/gb-hardware

    Game Boy -related custom hardware by gekkio

    29 parts379CC-BY-4.0
  • 2 layers55 × 58 mmProto ads bee mcu board, the printed circuit board in 3D

    Proto ads bee mcu board

    PantsForBirds/adsbee

    Open Source Embedded ADS-B Receiver

    29 parts344GPL-3.0