Skip to the content
2 layers13.8 × 11.7 mmMma7660-sensor breakout, the printed circuit board in 3D

Mma7660-sensor breakout

wickerbox/Basic-Breakout-Boards10

Proving out wickerlib templates and reference circuits.

Size
13.8 × 11.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
5
Pads
27
Tracks, vias
93, 9
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
13 Aug 2016
Updated
15 Oct 2017

Overview

Mma7660-sensor breakout is an open-source printed circuit board by wickerbox, from the wickerbox/Basic-Breakout-Boards repository on GitHub. It is a 2-layer board of 13.8 × 11.7 mm with 6 parts on 5 nets, routed with 93 tracks and 9 vias.

Its parts include 2 capacitors, 2 resistors, 1 IC and 1 connector. It belongs with the interfaces and adapters and sensors and measurement boards of this library.

README

sd-micro-pushpull-0475710001-breakout/README.md

Micro SD Connector (0475710001) Breakout Board v1.0

Breadboard- and 3V/5V-compatible micro SD breakout board.

Updated: 24 Feb 2017

  • Author: Jenner Hanni
  • Website: http://wickerbox.net
  • Company: Wickerbox Electronics
  • License: CERN Open Hardware License v1.2

Assembled

Schematic

Bill of Materials

RefQtyDescriptionDigikey PN
C2 C32CAP CER 0.1UF 100V X7R 0603490-3285-1-ND
C4 C12CAP CER 1UF 25V X7R 0603587-2984-1-ND
J11HEADER MALE 6POS TH 1x06 0.1”952-1902-ND
J21CONN MICRO SD CARD PUSH-PULLWM9731CT-ND
U11IC REG LDO 3.3V 0.15A SOT353576-3193-1-ND
U21IC VOLT-LEVEL TRANSLATOR TXB0104 SOIC14296-21928-1-ND

Assembly Diagram

Gerber Preview

Parts

6
QtyValueFootprintReferences
2100nFWickerlib:RLC-0805-SMDC1, C2
21KWickerlib:RLC-0603-SMDR1, R2
1HEADERWickerlib:CONN-HEADER-STRAIGHT-P2.54MM-1x05J1
1IC-MMA7660-DFN10Wickerlib:DFN-10-1EP-3x3MM-P0.5MMU1

More from wickerbox/Basic-Breakout-Boards

12
  • 2 layers86.4 × 43.2 mmAtmega2560, the printed circuit board in 3D

    Atmega2560

    wickerbox/Basic-Breakout-Boards

    Proving out wickerlib templates and reference circuits.

    29 parts10
  • 2 layers48.1 × 36.8 mmAtsamd21g18-breakout, the printed circuit board in 3D

    Atsamd21g18-breakout

    wickerbox/Basic-Breakout-Boards

    Proving out wickerlib templates and reference circuits.

    28 parts10
  • 2 layers35.6 × 48.3 mmAtmega328, the printed circuit board in 3D

    Atmega328

    wickerbox/Basic-Breakout-Boards

    Proving out wickerlib templates and reference circuits.

    26 parts10
  • 2 layers27.9 × 27.9 mmMcp73871-battery mgmt breakout, the printed circuit board in 3D

    Mcp73871-battery mgmt breakout

    wickerbox/Basic-Breakout-Boards

    Proving out wickerlib templates and reference circuits.

    19 parts10
  • 2 layers43.2 × 21.6 mmStns01-battery mgmt breakout, the printed circuit board in 3D

    Stns01-battery mgmt breakout

    wickerbox/Basic-Breakout-Boards

    Proving out wickerlib templates and reference circuits.

    19 parts10
  • 2 layers43.2 × 27.9 mmFgpmmopa6h gps breakout, the printed circuit board in 3D

    Fgpmmopa6h gps breakout

    wickerbox/Basic-Breakout-Boards

    Proving out wickerlib templates and reference circuits.

    15 parts10
  • 2 layers26.9 × 30 mmMpu9250-breakout, the printed circuit board in 3D

    Mpu9250-breakout

    wickerbox/Basic-Breakout-Boards

    Proving out wickerlib templates and reference circuits.

    14 parts10
  • 2 layers40.6 × 16.5 mmAvr programmer, the printed circuit board in 3D

    Avr programmer

    wickerbox/Basic-Breakout-Boards

    Proving out wickerlib templates and reference circuits.

    13 parts10
  • 2 layers44.5 × 29.2 mmSd full-2041021-4-breakout, the printed circuit board in 3D

    Sd full-2041021-4-breakout

    wickerbox/Basic-Breakout-Boards

    Proving out wickerlib templates and reference circuits.

    8 parts10
  • 2 layers7.6 × 20.3 mmNeopixel ws2812b breakout, the printed circuit board in 3D

    Neopixel ws2812b breakout

    wickerbox/Basic-Breakout-Boards

    Proving out wickerlib templates and reference circuits.

    4 parts10

Similar boards

  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT
  • 2 layers51.5 × 16.6 mmMicroswitchXY Endstop, the printed circuit board in 3D

    MicroswitchXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    6 parts1.1kGPL-3.0
  • 2 layers21.9 × 76.7 mmAmiga External, the printed circuit board in 3D

    Amiga External

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    6 parts1kGPL-3.0
  • 2 layers88.9 × 50.8 mmBusinesscard, the printed circuit board in 3D

    Businesscard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    6 parts915
  • 2 layers20.3 × 15.2 mmL0 RGB led, the printed circuit board in 3D

    L0 RGB led

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    6 parts546MIT
  • 2 layers9 × 3.6 mmOpticalEncoder, the printed circuit board in 3D

    OpticalEncoder

    adamb314/ServoProject

    Getting the most out of your hobby servo

    6 parts545

Questions

How big is the Mma7660-sensor breakout PCB?

It measures 13.8 × 11.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Mma7660-sensor breakout use?

6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mma7660-sensor breakout KiCad files?

From the wickerbox/Basic-Breakout-Boards repository on GitHub, at the commit this page was made from: the board is mma7660-sensor-breakout/mma7660-sensor-breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mma7660-sensor breakout design in my own project?

Its repository states no licence, so its author keeps all rights: ask wickerbox before reusing the design.