2 layers390 × 93 mm
Pots
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
93 parts960Apache-2.0
2 layers170 × 140 mm
FerroBot
wheeler-microfluidics/FerroBot1First attempt of making a FerroBot based on https://github.com/The-Brainery/FerroBot.
- Size
- 170 × 140 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 93
- Nets
- 79
- Pads
- 274
- Tracks, vias
- 460, 2
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 May 2018
- Updated
- 6 Jun 2018
Overview
FerroBot is an open-source printed circuit board by wheeler-microfluidics, from the wheeler-microfluidics/FerroBot repository on GitHub. It is a 2-layer board of 170 × 140 mm with 93 parts on 79 nets, routed with 460 tracks and 2 vias.
Its parts include 36 diodes, 12 transistors, 8 connectors and 1 switch.
README
README.mdFerroBot
First attempt of making a FerroBot based on https://github.com/The-Brainery/FerroBot.
This version has the option to be controlled via microcontroller or the FerroBot controller board (https://github.com/wheeler-microfluidics/FerroBot-Button-Controller.kicad)
Parts
93| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | D_Schottky | Diodes_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +20 |
| 36 | FERROBOT_MAGNET | WheelerLab:Ferrobot_Magnet | M1, M2, M10, M11, M12, M13, M14, M15, M16, M17, M18, M19, M20, M21, M22, M23 +20 |
| 12 | Q_NMOS_DGS | TO_SOT_Packages_THT:TO-220-3_Horizontal | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12 |
| 4 | CONN_01X01 | Mounting_Holes:MountingHole_3.2mm_M3_Pad | J39, J40, J41, J42 |
| 1 | BARREL_JACK | Wheeler:DC_JACK_SMD | J37 |
| 1 | CONN_02X06 | Pin_Headers:Pin_Header_Straight_2x06_Pitch2.54mm | J38 |
| 1 | Conn_01x09 | Pin_Headers:Pin_Header_Straight_1x09_Pitch2.54mm | J3 |
| 1 | Conn_01x13 | Pin_Headers:Pin_Header_Straight_1x13_Pitch2.54mm | J1 |
| 1 | SPST | WheelerLab:L101_Switch | S1 |
Questions
How big is the FerroBot PCB?
It measures 170 × 140 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FerroBot use?
93 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FerroBot KiCad files?
From the wheeler-microfluidics/FerroBot repository on GitHub, at the commit this page was made from: the board is FerroBot.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the FerroBot design in my own project?
Its repository states no licence, so its author keeps all rights: ask wheeler-microfluidics before reusing the design.
Similar boards
- 2 layers217.6 × 68.1 mm
Keezyboost40
ChrisChrisLoLo/keezyboost40
4x10 ortholinear with an LCD in the middle. Uses the Raspberry Pi Pico, as well as Rust firmware
93 parts202CC-BY-SA-4.0 - 2 layers100 × 100 mm
- 2 layers147 × 80 mm
Controller
voltlog/Valve-Actuator
If you are looking for sources of previous revisions (revA, revB, revC) checkout the different branches of this repo.
93 parts108GPL-3.0 - 2 layers276 × 87.1 mm
- 2 layers30 × 46 mm
- 2 layers145.1 × 107.7 mm
Aurora l
Musab-Hassan/aurora_keyboard
A gorgeous split wireless ortholinear keyboard that you can build yourself.
93 parts64GPL-3.0 - 2 layers
Psoc5power2
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
93 parts59