

MCP39F521 Breakout
MCP39F521 Energy Monitor ASIC Breakout
- Size
- 35.6 × 27.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 25
- Pads
- 115
- Tracks, vias
- 296, 37
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 25 Dec 2020
- Updated
- 28 Dec 2024
Overview
MCP39F521 Breakout is an open-source printed circuit board by whatnick, from the whatnick/MCP39F521_Breakout repository on GitHub. It is a 2-layer board of 35.6 × 27.9 mm with 39 parts on 25 nets, routed with 296 tracks and 37 vias.
It is built around the MCP39F521-E/MQ. Its parts include 12 resistors, 11 capacitors, 4 connectors, 2 ICs and 2 inductors. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdMCP39F521 Breakout PCB
This is a basic breakout PCB for the MCP39F521 ASIC from Microchip. This ASIC has ADC's and an embedded PIC microcontroller to perform high-accuracy energy measurements. The ASIC can appear in upto 4 i2c addresses based on jumper settings. The breakout board is usable with this Arduino Library
PCB Design


PCB Availabilty
- Tindie [blocked]
- PCBWay [blocked]
- Aisler [blocked]
- OSHPark [blocked]
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1.5k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4 |
| 4 | 33nF 50V | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4 |
| 3 | 0.1uF 25V | Capacitor_SMD:C_0603_1608Metric | C5, C8, C11 |
| 3 | Conn_01x01 | TestPoint:TestPoint_Pad_1.5x1.5mm | J2, J4, J5 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2, TP3 |
| 2 | 2.2k | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 2 | 2.2uF 25V | Capacitor_SMD:C_0805_2012Metric | C6, C7 |
| 2 | 2.4R | Resistor_SMD:R_0603_1608Metric | R11, R12 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C9, C10 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R5, R8 |
| 2 | FB 300ohm | Inductor_SMD:L_0603_1608Metric | L1, L2 |
| 2 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm | A0, A1 |
| 1 | 0R | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 10R | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J11 |
| 1 | Crystal | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | LOGO | Whatnick_logo:Whatnick_logo | LOGO2 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo2_7.3x6mm_SilkScreen | LOGO1 |
| 1 | MCP39F521 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U1 |
| 1 | MCP9700AT-ETT | Package_TO_SOT_SMD:SOT-23 | U2 |
Similar boards
- 2 layers100 × 95 mm

- 2 layers24.4 × 24.4 mm

OSO SWAT B1
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
39 parts2.1k - 2 layers100 × 33.5 mm

Breakout 48pin 174917-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
39 parts1.2k - 2 layers33 × 26 mm

VL53L1x pwm
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
39 parts915 - 2 layers43.4 × 18.8 mm

Usb sniffer lite
ataradov/usb-sniffer-lite
A simple USB sniffer based on Raspberry Pi RP2040
39 parts706BSD-3-Clause - 2 layers40 × 20 mm

ESP8266
windowsair/wireless-esp8266-dap
CMSIS-DAP compatible wireless debugger for ESP8266/ESP32/ESP32C3/ESP32S3. Optional 40MHz SPI acceleration, etc. 适配多种ESP芯片的无线调试器
39 parts690MIT - 2 layers100 × 70.3 mm

- 2 layers81.3 × 53.3 mm

RGB LED 1.4
lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script
39 parts429GPL-2.0
Questions
How big is the MCP39F521 Breakout PCB?
It measures 35.6 × 27.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MCP39F521 Breakout use?
39 parts, built around the MCP39F521-E/MQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MCP39F521 Breakout KiCad files?
From the whatnick/MCP39F521_Breakout repository on GitHub, at the commit this page was made from: the board is MCP39F521_Breakout.kicad_pcb and its schematic MCP39F521_Breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MCP39F521 Breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask whatnick before reusing the design.