2 layers40 × 34 mm
2 layers35.6 × 27.9 mm
CS5464 Breakout
whatnick/CS5464_Breakout6Cirrus Logic CS5464 Single phase energy monitor breakout
- Size
- 35.6 × 27.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 29
- Pads
- 94
- Tracks, vias
- 299, 35
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Dec 2018
- Updated
- 1 Feb 2020
Overview
CS5464 Breakout is an open-source printed circuit board by whatnick, from the whatnick/CS5464_Breakout repository on GitHub. It is a 2-layer board of 35.6 × 27.9 mm with 37 parts on 29 nets, routed with 299 tracks and 35 vias.
It is built around the CS5464-ISZ. Its parts include 12 capacitors, 10 resistors, 1 IC, 1 connector and 1 crystal. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdCS5464 Cirrus Logic AC-Energy Monitor Breakout
Minimal breakout board to test and develop drivers for the Cirrus Logic CS5464 Single-phase Energy Monitor ASIC.
Arduino code available here
Features include:
- RC networks for sampling Voltage and Current.
- Crystal to provide clock to ASIC.
Board Plots
Board Front
Board Back
3D Render
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1K | Resistor_SMD:R_0603_1608Metric | R5, R6, R7, R8, R9, R10 |
| 6 | 27nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6 |
| 4 | 2.4R | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4 |
| 3 | 100nF | Capacitor_SMD:C_0603_1608Metric | C10, C11, C12 |
| 3 | C_Small | Capacitor_SMD:C_0603_1608Metric | C7, C8, C9 |
| 1 | 4.096MHz | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | CPUCLK | TestPoint:TestPoint_Pad_1.5x1.5mm | CCLK1 |
| 1 | CS5464-ISZ | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U1 |
| 1 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1 |
| 1 | IN2 | TestPoint:TestPoint_Pad_1.5x1.5mm | IN2 |
| 1 | IP2 | TestPoint:TestPoint_Pad_1.5x1.5mm | IP2 |
| 1 | LOGO | Whatnick_logo:Whatnick_logo | G1 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo2_7.3x6mm_SilkScreen | LOGO1 |
| 1 | MODE | TestPoint:TestPoint_Pad_1.5x1.5mm | MODE1 |
| 1 | PFMON | TestPoint:TestPoint_Pad_1.5x1.5mm | PFMON1 |
| 1 | ~E1 | TestPoint:TestPoint_Pad_1.5x1.5mm | ~E1 |
| 1 | ~E2 | TestPoint:TestPoint_Pad_1.5x1.5mm | ~E2 |
| 1 | ~E3 | TestPoint:TestPoint_Pad_1.5x1.5mm | ~E3 |
| 1 | ~INT | TestPoint:TestPoint_Pad_1.5x1.5mm | ~INT1 |
| 1 | ~RESET | TestPoint:TestPoint_Pad_1.5x1.5mm | ~RESET1 |
Similar boards
- 2 layers53.9 × 23.2 mm
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
37 parts1kGPL-3.0 - 2 layers52 × 51.8 mm
Esp32-homeassistant rf bridge
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
37 parts915 - 2 layers87.8 × 59.8 mm
FreeDeck SMD 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
37 parts772 - 2 layers65 × 28 mm
BMS Cell Module
stuartpittaway/diyBMS
Do it yourself battery management system for Lithium ion battery packs/cells
37 parts676GPL-3.0 - 2 layers48 × 32 mm
FlatSat
Pwnsat/FlatSat
Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research
37 parts575GPL-2.0 - 2 layers38.1 × 153.7 mm
- 2 layers47.8 × 27.4 mm
Vsf stm32h7b0
vsfteam/vsf
Versaloon Software Framework -- a tiny preemptive-capable event-driven incremental software framework for embedded systems
37 parts341Apache-2.0
Questions
How big is the CS5464 Breakout PCB?
It measures 35.6 × 27.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CS5464 Breakout use?
37 parts, built around the CS5464-ISZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CS5464 Breakout KiCad files?
From the whatnick/CS5464_Breakout repository on GitHub, at the commit this page was made from: the board is CS5464_Breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CS5464 Breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask whatnick before reusing the design.