2 layers72 × 43 mm
4 layers49.8 × 49.8 mm
RFIDetector
wh201906/RFIDetector3Detect RFID reader field type(HF/LF)
- Size
- 49.8 × 49.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 22
- Pads
- 70
- Tracks, vias
- 123, 11
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 12 Jan 2024
- Updated
- 22 Mar 2024
Overview
RFIDetector is an open-source printed circuit board by wh201906, from the wh201906/RFIDetector repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 4-layer board of 49.8 × 49.8 mm with 34 parts on 22 nets, routed with 123 tracks and 11 vias.
It is built around the 1N5819WS. Its parts include 14 capacitors and 10 diodes.
Main components
1README
README.mdRFIDetector
An opensource hardware project for detecting reader field type(HF/LF)
Copyright and License
Copyright (c) 2024 wh201906
All hardware projects in this repository are licensed under CERN-OHL-S v2 or any later version.
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1N5819WS | Diode_SMD:D_SOD-323_HandSoldering | D2, D3, D4, D5, D7, D8, D9, D10 |
| 8 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8 |
| 5 | 0 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7, C12, C13, C14 |
| 4 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C9, C10, C11 |
| 4 | 47u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D6 |
| 2 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP9, JP11 |
| 1 | 4.7n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
More from wh201906/RFIDetector
1Similar boards
- 2 layers26.5 × 34.4 mm
PicoLoaderNSB
makeo/PicoLoader
A cheap and easy to install modchip for the Nintendo GameCube!
45 parts320GPL-2.0 - 6 layers55 × 95 mm
- 4 layers37.1 × 37.2 mm
Doorman
AzonInc/Doorman
ESP32-S3 based Intercom Gateway (TCS / Koch / Niko / Scantron / Analogue Systems)
44 parts252GPL-3.0 - 2 layers35.9 × 62.7 mm
Rp2040-memcard
sd2psx/pcb
The PCB must be produced in 0.8mm thickness. Production files are provided under the "Releases" tab. These do not include the through-hole OLED module.
60 parts241 - 4 layers121.9 × 109.2 mm
Plinkyblack hwmidi jacks
plinkysynth/plinky_public
a public release of the plinky sw and hw
300 parts227 - 6 layers83.5 × 56 mm
- 6 layers90 × 153 mm
Blackpants
o7-machinehum/Blackpants
Open blackpants.kicadpro for the active A523 schematic and PCB. It replaces the A33 hierarchy and uses AXP717C + AXP323 with 2GB LPDDR4.
300 parts189MIT - 2 layers53 × 53 mm
Hair electrolysis machine
zoemaestra/hair-electrolysis-machine-usb-c
A fork of scd31's hair electrolysis machine but with USB-C and optimised for cheaper assembly with JLCPCB
83 parts168CERN-OHL-P-2.0
Questions
How big is the RFIDetector PCB?
It measures 49.8 × 49.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the RFIDetector use?
34 parts, built around the 1N5819WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RFIDetector KiCad files?
From the wh201906/RFIDetector repository on GitHub, at the commit this page was made from: the board is hardware/rev0.12/RFIDetector.kicad_pcb and its schematic hardware/rev0.1/RFIDetector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RFIDetector design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).