2 layers10.5 × 11.9 mm
2 layers17.3 × 24.5 mm
PM3 ISO7816
wh201906/PM3-Modding39Moddings for Proxmark3
- Size
- 17.3 × 24.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 20
- Pads
- 55
- Tracks, vias
- 118, 19
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 6 Jul 2023
- Updated
- 21 Jan 2024
Overview
PM3 ISO7816 is an open-source printed circuit board by wh201906, from the wh201906/PM3-Modding repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 17.3 × 24.5 mm with 13 parts on 20 nets, routed with 118 tracks and 19 vias.
It is built around the N76E003AT20. Its parts include 4 resistors, 3 connectors, 2 capacitors and 1 IC. It belongs with the radio and wireless boards and the ESP32 and 8051 (CH55x, STC, AT89) boards of this library.
Main components
1README
README.mdPM3 Modding
PM3_Flash
Add the external SPI flash to the PM3 Easy
README
Schematic
PM3_ISO7816
Add the smartcard module to the PM3 Easy
README
Schematic
PM3_USB2TCP
README
Connect to PM3 hardware with TCP, using ESP32-S3/S2 as a USB to TCP bridge
No need to jumping any wires to the MCU directly. It works with most of the ESP32-S3/S2 dev boards
PM3_USB2UDP
README
Connect to PM3 hardware with UDP, like PM3_USB2TCP but faster
License
All hardware projects in this repository are licensed under CERN Open Hardware Licence Version 2 - Weakly Reciprocal.
All software(firmware) projects in this repository are licensed under GNU General Public License v3.0.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2, J3 |
| 1 | N76E003AT20 | libs:SOP65P640X120-20N | U1 |
| 1 | Smartcard Slot | libs:WURTH_693010020611 | J1 |
More from wh201906/PM3-Modding
1Similar boards
- 2 layers52.4 × 33 mm
- 2 layers52.3 × 68.1 mm
N76e003-ufo target board
nikitalita/n76e003-ufo-target-board
Chipwhisperer UFO Target board for the nuvoton N76e003
9 partsMIT - 2 layers40 × 20 mm
- 2 layers74.9 × 49.5 mm
- 2 layers35 × 29 mm
MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm
AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm
- 2 layers95 × 95 mm
Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0
Questions
How big is the PM3 ISO7816 PCB?
It measures 17.3 × 24.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PM3 ISO7816 use?
13 parts, built around the N76E003AT20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PM3 ISO7816 KiCad files?
From the wh201906/PM3-Modding repository on GitHub, at the commit this page was made from: the board is PM3_ISO7816/hardware/PM3_ISO7816.kicad_pcb and its schematic PM3_Flash/hardware/PM3_Flash.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PM3 ISO7816 design in my own project?
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).