2 layers40 × 30 mm
2 layers50 × 101.4 mm
Interconnect
wfd3/kim1-interconnectPassive interconnect for use with the KIM-1 Breakout Board
- Size
- 50 × 101.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 44
- Pads
- 88
- Tracks, vias
- 88, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 17 Jul 2024
- Updated
- 17 Oct 2024
Overview
Interconnect is an open-source printed circuit board by wfd3, from the wfd3/kim1-interconnect repository on GitHub, published under the MIT licence. It is a 2-layer board of 50 × 101.4 mm with 3 parts on 44 nets, routed with 88 tracks and 0 vias.
It belongs with the interfaces and adapters boards of this library.
README
README.mdThis is a simple passive interconnect that allows the connection of more than one board to a KIM-1 using either the powered or passive breakout connectors. When ordering from a PCB fabricator, remember to specfify that the board requires edge connectors and the edge connector surface finish of your choice. Typically, we recommend Hard Gold and a bevel of 20 degrees.
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Conn_02x22_Top_Bottom | kim1:pcb_edge_connector_02x22_right | J2 |
| 1 | Conn_02x22_Top_Bottom | kim1:pcb_edge_connector_02x22_left | J1 |
The 2 most common of 3 parts.
Questions
How big is the Interconnect PCB?
It measures 50 × 101.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Interconnect use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Interconnect KiCad files?
From the wfd3/kim1-interconnect repository on GitHub, at the commit this page was made from: the board is interconnect.kicad_pcb and its schematic interconnect.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Interconnect design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
- 2 layers10.5 × 83 mm
- 2 layers21.2 × 51.3 mm
Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT