Skip to the content
2 layers64.2 × 35.6 mmModbus Board, the printed circuit board in 3D

A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

Size
64.2 × 35.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
20
Pads
59
Tracks, vias
104, 9
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
14 Jun 2026
Updated
2 Nov 2026

Overview

Modbus Board is an open-source printed circuit board by WestianPKl, from the WestianPKl/pcb-docs repository on GitHub. It is a 2-layer board of 64.2 × 35.6 mm with 20 parts on 20 nets, routed with 104 tracks and 9 vias.

It is built around the MAX3485EESA+T, SIP32431DR3-T1GE3 and AO3407A, with the SM712.TCT among its other parts. Its parts include 5 resistors, 3 diodes, 2 capacitors, 2 ICs and 2 connectors.

Main components

4

README

README.md

PCB Manager — Board Collection

A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI, or UART.

Author: Piotr Kłyś
Tool: KiCAD 8.x
Firmware: MicroPython (Pico boards), AVR-GCC (ATmega boards)


Boards Overview

BoardVersionInterfaceIC / Description
Main_Board1.0 / 1.1 / 1.2a—Raspberry Pi Pico test & integration board
CAN_Board1.0SPIMCP2515 — CAN bus controller
EEPROM_Board1.0I2CM24C32 — 32 Kbit EEPROM
GPIO_Board1.0I2CMCP23017 — 16-bit GPIO expander
INA_Board1.0I2CINA226 — voltage / current / power monitor
RTC_Board1.0I2CPCF8563T — real-time clock
Relay_Board1.0GPIO2-channel relay module
Modbus_Board1.0UARTRS-485 / Modbus RTU
Power_Board1.0—DC power supply module
MOSFET_Board1.0GPIOHigh-side / low-side MOSFET switch
Amplifier_Board—AnalogSignal amplifier
ATMega_Board1.0—ATmega (through-hole) development board
ATMegaSMD_Board1.0—ATmega (SMD) development board
Tree_Board——AVR LED Christmas tree
IoT_Logger_B_1.01.0—IoT data logger revision B
IoT_Logger_C_1.01.0—IoT data logger revision C
Pico_TH_Logger_SMD_PCF8563T_2.12.1I2CPico temp/humidity logger with RTC
Pico_TH_Logger_Relay_SMD_PCF8563T_2.12.1I2CPico temp/humidity logger with RTC + relay

Board Details

Main_Board

The central development and integration board built around the Raspberry Pi Pico. Used to test all peripheral modules in the collection.

Features:

  • RGB LED (PWM)
  • 2× status LEDs (PWM)
  • Buzzer (PWM)
  • 2× push buttons
  • ADC input with 100 kΩ / 200 kΩ voltage divider
  • Connectors for all expansion boards (I2C, SPI, CAN, EEPROM, GPIO, INA, RTC, Relay)
  • Optional multi-threaded test runner (_thread)

Firmware: Main_Board/Code/main.py


CAN_Board

CAN bus communication module using the MCP2515 controller over SPI.

Features:

  • SPI interface to Pico
  • Standard CAN 2.0 frame support
  • Loopback, sniffer, and master/slave test scripts

Firmware: CAN_Board/Code/

  • can_mcp2515.py — low-level MCP2515 driver
  • can_communication.py — higher-level protocol
  • hello.py, loopback.py, sniffer.py, can_slave.py, can_test.py — examples

EEPROM_Board

Non-volatile storage expansion using the M24C32 (32 Kbit / 4 KB) I2C EEPROM.

Firmware: EEPROM_Board/Code/eeprom_m24c32.py


GPIO_Board

16-bit I2C GPIO expander using the MCP23017, providing two 8-bit ports (Port A / Port B) with interrupt support.

Firmware: GPIO_Board/Code/expander_mpc23017.py


INA_Board

High-side power monitoring using the INA226 — measures bus voltage, shunt voltage, current, and power via I2C.

Default configuration:

  • Shunt resistor: 100 mΩ
  • Max current: 3.2 A
  • Alert pin supported

Firmware: INA_Board/Code/measurement_ina226.py


RTC_Board

Real-time clock module using the PCF8563T via I2C. Provides timekeeping, alarm, and 1 Hz clock output.

Features:

  • Date / time read and write
  • Alarm support
  • 1 Hz CLKOUT output
  • Battery backup pin

Firmware: RTC_Board/Code/rtc_pcf8563.py


Relay_Board

2-channel relay board controlled via GPIO from the Pico.


Modbus_Board

RS-485 transceiver board enabling Modbus RTU communication over UART.


Power_Board

DC power supply module — voltage regulation and distribution for the board ecosystem.


MOSFET_Board

MOSFET-based switching board for controlling higher-power loads from Pico GPIO.


Amplifier_Board

Analog signal amplifier module.


ATMega_Board

Through-hole ATmega development board — classic DIP package, ISP programming header.


ATMegaSMD_Board

SMD variant of the ATmega development board — compact form factor.


Tree_Board

AVR-based LED Christmas tree — decorative board with animated LED patterns.

Firmware: Tree_Board/TreeCode/main.c (AVR-GCC)
Gerbers / renders: Tree_Board/PROD/


IoT_Logger_B

IoT data logger — revision B.


IoT_Logger_C

IoT data logger — revision C. Improved layout over revision B.


Pico_TH_Logger_SMD_PCF8563T_2.1

Compact SMD temperature and humidity logger based on Raspberry Pi Pico with a PCF8563T RTC for timestamped logging.


Pico_TH_Logger_Relay_SMD_PCF8563T_2.1

Extended version of the TH Logger adding a relay output for threshold-based control (e.g. ventilation, heating).


Repository Structure

text
pcb-docs/
├── <BoardName>/
│   ├── <BoardName>.kicad_pro      # KiCAD project
│   ├── <BoardName>.kicad_sch      # Schematic
│   ├── <BoardName>.kicad_pcb      # PCB layout
│   ├── Code/                      # MicroPython / C firmware
│   └── PROD/                      # Gerbers, renders, BOM exports
├── Boards_BOM.ods                 # Combined Bill of Materials
└── README.md

Each board may contain multiple revision subdirectories (e.g. 1.0/, 1.1/).


Getting Started

Requirements

  • KiCAD 8.x — to open schematics and PCB layouts
  • Thonny or mpremote — to flash MicroPython firmware to Pico
  • AVR-GCC + avrdude — for Tree_Board / ATmega boards

Running firmware on Pico

  1. Flash MicroPython to your Raspberry Pi Pico.
  2. Copy the relevant driver file(s) from <BoardName>/Code/ to the Pico filesystem.
  3. Run or import the module from the REPL or main.py.
python
# Example — INA226 power monitor
from machine import I2C, Pin
from measurement_ina226 import MEASUREMENT_INA226

i2c = I2C(0, sda=Pin(4), scl=Pin(5))
ina = MEASUREMENT_INA226(i2c, r_shunt_ohm=0.1, max_current=3.2)
print(ina.read_voltage(), ina.read_current(), ina.read_power())

Bill of Materials

A combined BOM for all boards is available in Boards_BOM.ods (OpenDocument Spreadsheet).


License

This project is licensed under the CERN Open Hardware Licence v2 - Permissive (CERN-OHL-P).

You are free to use, modify, and manufacture these designs. Attribution appreciated.

Parts

20
QtyValueFootprintReferences
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_DIN965_PadH1, H2, H3, H4
2680Resistor_SMD:R_0805_2012MetricR2, R3
1100KResistor_SMD:R_0805_2012MetricR5
1100nFCapacitor_SMD:C_0805_2012MetricC2
1120Resistor_SMD:R_0805_2012MetricR1
11KResistor_SMD:R_0805_2012MetricR4
11uFCapacitor_SMD:C_0603_1608MetricC1
1AO3407APackage_TO_SOT_SMD:SOT-23Q1
1BZT52C5V1-DIODiode_SMD:D_SOD-123FD3
1COMConnector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_VerticalJ12
1Jumper_2_BridgedConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP1
1LEDLED_SMD:LED_0805_2012MetricD2
1MAX3485EESA+Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU1
1ModbusTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_HorizontalJ1
1SIP32431DR3-T1GE3Package_TO_SOT_SMD:SOT-363_SC-70-6U2
1SM712.TCTPackage_TO_SOT_SMD:SOT-23D1

More from WestianPKl/pcb-docs

12
  • 2 layers94.7 × 71.8 mmIoT Logger B 1.0, the printed circuit board in 3D

    IoT Logger B 1.0

    WestianPKl/pcb-docs

    A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

    147 parts
  • 2 layers74.1 × 91.8 mmSTM Board, the printed circuit board in 3D

    STM Board

    WestianPKl/pcb-docs

    A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

    131 parts
  • 2 layers160 × 158 mmTree Board, the printed circuit board in 3D

    Tree Board

    WestianPKl/pcb-docs

    A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

    119 parts
  • 2 layers160 × 158 mmTree Board, the printed circuit board in 3D

    Tree Board

    WestianPKl/pcb-docs

    A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

    116 parts
  • 2 layers100 × 80 mmController board, the printed circuit board in 3D

    Controller board

    WestianPKl/pcb-docs

    A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

    114 parts
  • 2 layers94.7 × 71.8 mmIoT Logger C 1.0, the printed circuit board in 3D

    IoT Logger C 1.0

    WestianPKl/pcb-docs

    A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

    107 parts
  • 2 layers94.7 × 71.8 mmDevice Board, the printed circuit board in 3D

    Device Board

    WestianPKl/pcb-docs

    A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

    104 parts
  • 2 layers65.2 × 80 mmTest board, the printed circuit board in 3D

    Test board

    WestianPKl/pcb-docs

    A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

    96 parts
  • 2 layers100.5 × 83 mmPicoLogger, the printed circuit board in 3D

    PicoLogger

    WestianPKl/pcb-docs

    A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

    81 parts
  • 2 layers100 × 80 mmOutput board, the printed circuit board in 3D

    Output board

    WestianPKl/pcb-docs

    A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

    76 parts
  • 2 layers100 × 80 mmPower board, the printed circuit board in 3D

    Power board

    WestianPKl/pcb-docs

    A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

    75 parts
  • 2 layers100 × 80 mmCommunication board, the printed circuit board in 3D

    Communication board

    WestianPKl/pcb-docs

    A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

    68 parts

Similar boards

  • 2 layers54 × 54 mmHT07, the printed circuit board in 3D

    HT07

    cuplsensor/cupltag

    cupl Tag Firmware and Hardware

    35 parts16
  • 2 layers33 × 22 mmNanoSense Motion, the printed circuit board in 3D

    NanoSense Motion

    bluetiger9/nanoSense-Motion

    Motion & Human Presence Sensing with Ultra Low Power Consumption and Bluetooth Low Energy Connectivity

    37 parts8
  • 4 layers90.6 × 58.1 mmEcoApi pcb, the printed circuit board in 3D

    EcoApi pcb

    EcoApi/EcoApi_BeeHiveMonitoring

    describ options with 0R resistors. etc ...

    179 parts4GPL-3.0
  • 2 layers33.8 × 131 mmSevenSegmentInputModule, the printed circuit board in 3D

    SevenSegmentInputModule

    cscott/SevenSegmentInputModule

    7-segment display input module for Framework 16

    86 parts2
  • 12 layers160.1 × 233.5 mmVme wren, the printed circuit board in 3D

    Vme wren

    KiCad/kicad-source-mirror

    This is an active mirror of the KiCad development branch, which is hosted at GitLab (updated every time something is pushed). Pull requests on GitHub are not accepted or watched.

    1,508 parts3.1kGPL-3.0
  • 4 layers64 × 38 mmNiclaVCarrier, the printed circuit board in 3D

    NiclaVCarrier

    ffich/NiclaV_RS485_Carrier

    A RS485 Carrier for Arduino Nicla Vision.

    59 parts2MIT
  • 2 layers120 × 80 mmBiometric scanner, the printed circuit board in 3D

    Biometric scanner

    Sid93/levram-biometric-attendance-scanner

    ESP32-S3 face-recognition factory attendance terminal — firmware, KiCad PCB, OpenSCAD enclosure, BOM

    45 parts1
  • 4 layers115 × 75 mmInduLink-485, the printed circuit board in 3D

    InduLink-485

    8aChristian/InduLink-485

    The board follows rigorous IPC (IPC-2152, IPC-2221, IPC-7351) standards, complete with galvanic isolation, industrial transient protection (TVS, Schottky, PTC Polyfuse), a wide-input step-down switching power…

    24 partsMIT

Questions

How big is the Modbus Board PCB?

It measures 64.2 × 35.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Modbus Board use?

20 parts, built around the MAX3485EESA+T, SIP32431DR3-T1GE3, AO3407A and SM712.TCT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Modbus Board KiCad files?

From the WestianPKl/pcb-docs repository on GitHub, at the commit this page was made from: the board is Modbus_Board/1.0/Modbus_Board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Modbus Board design in my own project?

Its repository states no licence, so its author keeps all rights: ask WestianPKl before reusing the design.