2 layers181 × 97 mm
OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
262 parts960Apache-2.0
2 layers285 × 95.8 mm
Ccd60
westfoxtrot/ccd6013ccd60 is a generic 60% PCB used for Cable Car Designs keyboard designs.
- Size
- 285 × 95.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 163
- Nets
- 99
- Pads
- 624
- Tracks, vias
- 1,286, 48
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Oct 2019
- Updated
- 26 Jul 2021
Overview
Ccd60 is an open-source printed circuit board by westfoxtrot, from the westfoxtrot/ccd60 repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 285 × 95.8 mm with 163 parts on 99 nets, routed with 1,286 tracks and 48 vias.
It is built around the PRTR5V0U2X. Its parts include 63 diodes, 7 capacitors, 4 resistors, 3 ICs and 1 transistor. It belongs with the STM32 boards of this library.
Main components
1README
README.mdccd60
ccd60 is a generic 60% PCB used for Cable Car Designs keyboard designs.
It is licensed under CC-BY-SA-4.0. This allows you to use it for your own projects and sell it with profit though I will not and cannot provide any support so please make sure you have that understanding before you plan to use it.
It is compatible with:
- Prophet (USB)
- Gambit (USB)
- Most tray mount boards (USB)
- Likely most 60% keyboards with JST/USB as it follows GH60 spec
There are 2 BOMs: One with a USB on the board and one that uses a JST header compatible with the Unified daughterboard project.
Parts
163| Qty | Value | Footprint | References |
|---|---|---|---|
| 63 | Diode_SMD:D_0805_2012Metric | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +47 | |
| 6 | ScrewHole | cablecardesigns:m2-oval | H2, H3, H4, H5, H6, H7 |
| 3 | 100nf | Diode_SMD:D_0805_2012Metric | C7, C8, C9 |
| 2 | 330 | Resistor_SMD:R_0805_2012Metric | RMX1, RMX2 |
| 2 | 4.7uf | Diode_SMD:D_0805_2012Metric | C5, C6 |
| 2 | 5k1 | Resistor_SMD:R_0805_2012Metric | R6, R7 |
| 2 | G*** | Artwork:CableCarLogo | svg2mod, svg2mod2 |
| 1 | reset:ResetShort | SW1 | |
| 1 | '" | MX_Only:MXOnly-1U-NoLED | MX_52 |
| 1 | ,< | MX_Only:MXOnly-1U-NoLED | MX_44 |
| 1 | -_ | MX_Only:MXOnly-1U-NoLED | MX_50 |
| 1 | .> | MX_Only:MXOnly-1U-NoLED | MX_48 |
| 1 | /? | MX_Only:MXOnly-1U-NoLED | MX_53 |
| 1 | 0 | MX_Only:MXOnly-1U-NoLED | MX_45 |
| 1 | 1 | MX_Only:MXOnly-1U-NoLED | MX_6 |
| 1 | 1.5k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 1.75 SHIFT | MX_Only:MXOnly-1.75U-NoLED | MX_57 |
| 1 | 10nf | Diode_SMD:D_0805_2012Metric | C4 |
| 1 | 10uf | Diode_SMD:D_0805_2012Metric | C3 |
| 1 | 1N4148 | Diode_SMD:D_0805_2012Metric | DR1 |
| 1 | 2 | MX_Only:MXOnly-1U-NoLED | MX_11 |
| 1 | 2.75 SHIFT | MX_Only:MXOnly-2.75U-NoLED | MX_55_1 |
| 1 | 3 | MX_Only:MXOnly-1U-NoLED | MX_16 |
| 1 | 30k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 4 | MX_Only:MXOnly-1U-NoLED | MX_20 |
| 1 | 5 | MX_Only:MXOnly-1U-NoLED | MX_24 |
| 1 | 500ma | Fuse:Fuse_0805_2012Metric | F1 |
| 1 | 6 | MX_Only:MXOnly-1U-NoLED | MX_28 |
| 1 | 7 | MX_Only:MXOnly-1U-NoLED | MX_33 |
| 1 | 8 | MX_Only:MXOnly-1U-NoLED | MX_37 |
| 1 | 9 | MX_Only:MXOnly-1U-NoLED | MX_41 |
| 1 | ;: | MX_Only:MXOnly-1U-NoLED | MX_47 |
| 1 | =+ | MX_Only:MXOnly-1U-NoLED | MX_55 |
| 1 | A | MX_Only:MXOnly-1U-NoLED | MX_8 |
| 1 | B | MX_Only:MXOnly-1U-NoLED | MX_31 |
| 1 | BC850 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Backspace | MX_Only:MXOnly-2U-NoLED | MX_59 |
| 1 | C | MX_Only:MXOnly-1U-NoLED | MX_23 |
| 1 | CAPS | MX_Only:MXOnly-1.75U-FLIPPED | MX_2 |
| 1 | D | MX_Only:MXOnly-1U-NoLED | MX_18 |
| 1 | E | MX_Only:MXOnly-1U-NoLED | MX_17 |
| 1 | ENTER | MX_Only:MXOnly-2.25U-NoLED | MX_61 |
| 1 | ESC | MX_Only:MXOnly-1U | MX_1 |
| 1 | ESD Gasket | cablecardesigns:ESD Gasket 8x8x4 | H1 |
| 1 | F | MX_Only:MXOnly-1U-NoLED | MX_22 |
| 1 | FN | MX_Only:MXOnly-1U-NoLED | MX_62 |
| 1 | FULL_LEFT_SHIFT | MX_Only:MXOnly-2.25U-NoLED | MX_43_1 |
| 1 | G | MX_Only:MXOnly-1U-NoLED | MX_26 |
| 1 | H | MX_Only:MXOnly-1U-NoLED | MX_30 |
| 1 | HHKB_\| | MX_Only:MXOnly-1U-NoLED | MX_63 |
| 1 | HRO-TYPE-C-31-M-12 | Type-C:HRO-TYPE-C-31-M-12-HandSoldering | USB1 |
| 1 | I | MX_Only:MXOnly-1U-NoLED | MX_38 |
| 1 | ISO_BS | MX_Only:MXOnly-1U-NoLED | MX_9 |
| 1 | ISO_ENTER | MX_Only:MXOnly-ISO-ReversedStabilizers-NoLED | MX_42_1 |
| 1 | ISO_HASH | MX_Only:MXOnly-1U-NoLED | MX_28_1 |
| 1 | J | MX_Only:MXOnly-1U-NoLED | MX_35 |
| 1 | JST-SH Header | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | JST1 |
| 1 | K | MX_Only:MXOnly-1U-NoLED | MX_39 |
| 1 | L | MX_Only:MXOnly-1U-NoLED | MX_43 |
| 1 | LD3985G33R_TSOT23 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | LEFT_ALT | MX_Only:MXOnly-1.5U-NoLED | MX_15 |
| 1 | LEFT_CTRL | MX_Only:MXOnly-1.5U-NoLED | MX_5 |
| 1 | LEFT_GUI | MX_Only:MXOnly-1U-NoLED | MX_10 |
| 1 | LEFT_SHIFT | MX_Only:MXOnly-1.25U-NoLED | MX_4 |
| 1 | M | MX_Only:MXOnly-1U-NoLED | MX_40 |
| 1 | N | MX_Only:MXOnly-1U-NoLED | MX_36 |
| 1 | O | MX_Only:MXOnly-1U-NoLED | MX_42 |
| 1 | P | MX_Only:MXOnly-1U-NoLED | MX_46 |
| 1 | PRTR5V0U2X | random-keyboard-parts:SOT143B | U3 |
| 1 | Q | MX_Only:MXOnly-1U-NoLED | MX_7 |
| 1 | R | MX_Only:MXOnly-1U-NoLED | MX_21 |
| 1 | RIGHT_ALT | MX_Only:MXOnly-1.5U-NoLED | MX_49 |
| 1 | RIGHT_CTRL | MX_Only:MXOnly-1.5U-NoLED | MX_58 |
| 1 | RIGHT_GUI | MX_Only:MXOnly-1U-NoLED | MX_54 |
| 1 | S | MX_Only:MXOnly-1U-NoLED | MX_13 |
| 1 | SPACEBAR | MX_Only:MXOnly-7U-ReversedStabilizers-NoLED | MX_32 |
| 1 | STEPPED_CAPS | MX_Only:MXOnly-1.25U | MX_29_1 |
| 1 | STM32F072CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | T | MX_Only:MXOnly-1U-NoLED | MX_25 |
| 1 | TAB | MX_Only:MXOnly-1.5U-NoLED | MX_3 |
The 153 most common of 163 parts.
Questions
How big is the Ccd60 PCB?
It measures 285 × 95.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ccd60 use?
163 parts, built around the PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ccd60 KiCad files?
From the westfoxtrot/ccd60 repository on GitHub, at the commit this page was made from: the board is ccd60.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ccd60 design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers68.6 × 53.3 mm
- 4 layers59 × 33.8 mm
- 4 layers137 × 86 mm
- 4 layers230.7 × 97.8 mm
- 2 layers285 × 94.6 mm
- 4 layers40 × 60 mm
Control board v2.0
0x23/nmWave-Interferometer
An Open Source Interferometer for Accurate Distance Measurements
106 parts151MIT - 2 layers285 × 94.6 mm
PH60Slim Choc
ph-design/PH60-SC
A printable low-profile 60% wireless mechanical keyboard kit powered by ZMK firmware.
219 parts132