Skip to the content
2 layers101.6 × 76.2 mmPIANO, the printed circuit board in 3D
Size
101.6 × 76.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
55
Nets
58
Pads
193
Tracks, vias
269, 33
Pours
4
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
1 Apr 2022
Updated
16 Apr 2022

Overview

PIANO is an open-source printed circuit board by wes-jiang, from the wes-jiang/PianoPCB repository on GitHub. It is a 2-layer board of 101.6 × 76.2 mm with 55 parts on 58 nets, routed with 269 tracks and 33 vias.

It is built around the ESP32-S2-SOLO-N8 and AP1509-50SG-13-MS. Its parts include 13 connectors, 12 capacitors, 11 resistors, 5 ICs and 5 diodes. It belongs with the ESP32 boards of this library.

Main components

2

Parts

55
QtyValueFootprintReferences
7Conn_01x01_FemaleConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ7, J8, J9, J10, J11, J12, J13
6100Resistor_SMD:R_0603_1608MetricR1, R3, R4, R6, R9, R11
510 uFCapacitor_SMD:C_0805_2012MetricC1, C2, C10, C11, C12
4.1 uFCapacitor_SMD:C_0603_1608MetricC3, C5, C6, C7
3640456-3Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1, J5, J6
3LEDLED_THT:LED_D5.0mm-3D1, D2, D3
3R_PotentiometerPotentiometer_THT:Potentiometer_ACP_CA9-V10_VerticalRV1, RV2, RV3
2200Resistor_SMD:R_0603_1608MetricR2, R8
2Opamp_DualLibrary:SOIC127P600X175-8NU3, U4
1.4 uFCapacitor_SMD:C_0603_1608MetricC4
11000uFCapacitor_THT:C_Radial_D10.0mm_H16.0mm_P5.00mmC9
110kResistor_SMD:R_0805_2012MetricR7
11KResistor_SMD:R_0805_2012MetricR5
11kResistor_SMD:R_0805_2012MetricR10
122-23-2021Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ4
1330uFCapacitor_SMD:C_1210_3225MetricC8
139uHInductor_SMD:L_10.4x10.4_H4.8L1
1AP1509-50SG-13Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU5
1Barrel_Jack_SwitchConnector_BarrelJack:BarrelJack_HorizontalJ3
1DIODEDiode_SMD:D_SOD-123FD4
1D_SchottkyDiode_SMD:D_SOD-123FD5
1ESP32-S2-SOLOEspressif:ESP32-S2-SOLOU2
1LF33_TO220Package_TO_SOT_THT:TO-220-3_VerticalU1
1ON/OFFButton_Switch_SMD:SW_DPDT_CK_JS202011JCQNSW1
1RESETButton_Switch_SMD:SW_DPDT_CK_JS202011JCQNSW2
1USB_B_MicroConnector_USB:USB_Micro-B_GCT_USB3076-30-AJ2

The 52 most common of 55 parts.

Similar boards

  • 4 layers70 × 90 mmControl Motor BLDC, the printed circuit board in 3D

    Control Motor BLDC

    ManuelArgibay/BLDC-ESC-PCB

    PCB de 4 capas en KiCad para un ESC sensorless de motor BLDC (IR2301 + LM339, detección de BEMF) con Tiva C TM4C123GXL

    109 parts
  • 2 layers93.5 × 50.4 mm5V Buck Converter, the printed circuit board in 3D

    5V Buck Converter

    manpreet-singh/Atlas

    Small Robot Project

    36 parts1GPL-3.0
  • 4 layers66 × 51 mmPCB Control, the printed circuit board in 3D

    PCB Control

    alejandromartinez03/ESC-BLDC-Design-and-Balanced-Embedded-Control

    Editable KiCad design files for the central balancing/control board.

    31 parts
  • 2 layers131.2 × 95.7 mmSwadge S2-Devkit, the printed circuit board in 3D

    Swadge S2-Devkit

    AEFeinstein/Super-2023-Swadge-HW

    Swadge devkit for an ESP32-S2 with all the bells and whistles

    86 parts17MIT
  • 4 layers57 × 56 mmIot led strip pcb, the printed circuit board in 3D

    Iot led strip pcb

    0xjmux/iot_leddriver_hw

    ESP32-based WS2812B LED Strip Driver PCB, designed for music visualization

    85 parts9
  • 4 layers48 × 55.4 mmMinimap pcb v1, the printed circuit board in 3D

    Minimap pcb v1

    lucapoulos/minimap

    See our final report for a technical overview of the demo we presented.

    77 parts2
  • 2 layersTIME II PCB, the printed circuit board in 3D

    TIME II PCB

    ashvin-verma/TIME-II-PCB-REV-C

    116 parts1

Questions

How big is the PIANO PCB?

It measures 101.6 × 76.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PIANO use?

55 parts, built around the ESP32-S2-SOLO-N8 and AP1509-50SG-13-MS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PIANO KiCad files?

From the wes-jiang/PianoPCB repository on GitHub, at the commit this page was made from: the board is PIANO/PIANO.kicad_pcb and its schematic HOPE_template/HOPE_template.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PIANO design in my own project?

Its repository states no licence, so its author keeps all rights: ask wes-jiang before reusing the design.