
Control Motor BLDC
ManuelArgibay/BLDC-ESC-PCB
PCB de 4 capas en KiCad para un ESC sensorless de motor BLDC (IR2301 + LM339, detección de BEMF) con Tiva C TM4C123GXL

PIANO is an open-source printed circuit board by wes-jiang, from the wes-jiang/PianoPCB repository on GitHub. It is a 2-layer board of 101.6 × 76.2 mm with 55 parts on 58 nets, routed with 269 tracks and 33 vias.
It is built around the ESP32-S2-SOLO-N8 and AP1509-50SG-13-MS. Its parts include 13 connectors, 12 capacitors, 11 resistors, 5 ICs and 5 diodes. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | Conn_01x01_Female | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J7, J8, J9, J10, J11, J12, J13 |
| 6 | 100 | Resistor_SMD:R_0603_1608Metric | R1, R3, R4, R6, R9, R11 |
| 5 | 10 uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C10, C11, C12 |
| 4 | .1 uF | Capacitor_SMD:C_0603_1608Metric | C3, C5, C6, C7 |
| 3 | 640456-3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J5, J6 |
| 3 | LED | LED_THT:LED_D5.0mm-3 | D1, D2, D3 |
| 3 | R_Potentiometer | Potentiometer_THT:Potentiometer_ACP_CA9-V10_Vertical | RV1, RV2, RV3 |
| 2 | 200 | Resistor_SMD:R_0603_1608Metric | R2, R8 |
| 2 | Opamp_Dual | Library:SOIC127P600X175-8N | U3, U4 |
| 1 | .4 uF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 1000uF | Capacitor_THT:C_Radial_D10.0mm_H16.0mm_P5.00mm | C9 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 22-23-2021 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | 330uF | Capacitor_SMD:C_1210_3225Metric | C8 |
| 1 | 39uH | Inductor_SMD:L_10.4x10.4_H4.8 | L1 |
| 1 | AP1509-50SG-13 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J3 |
| 1 | DIODE | Diode_SMD:D_SOD-123F | D4 |
| 1 | D_Schottky | Diode_SMD:D_SOD-123F | D5 |
| 1 | ESP32-S2-SOLO | Espressif:ESP32-S2-SOLO | U2 |
| 1 | LF33_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | ON/OFF | Button_Switch_SMD:SW_DPDT_CK_JS202011JCQN | SW1 |
| 1 | RESET | Button_Switch_SMD:SW_DPDT_CK_JS202011JCQN | SW2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_GCT_USB3076-30-A | J2 |
The 52 most common of 55 parts.

ManuelArgibay/BLDC-ESC-PCB
PCB de 4 capas en KiCad para un ESC sensorless de motor BLDC (IR2301 + LM339, detección de BEMF) con Tiva C TM4C123GXL



alejandromartinez03/ESC-BLDC-Design-and-Balanced-Embedded-Control
Editable KiCad design files for the central balancing/control board.

AEFeinstein/Super-2023-Swadge-HW
Swadge devkit for an ESP32-S2 with all the bells and whistles

0xjmux/iot_leddriver_hw
ESP32-based WS2812B LED Strip Driver PCB, designed for music visualization

lucapoulos/minimap
See our final report for a technical overview of the demo we presented.

It measures 101.6 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
55 parts, built around the ESP32-S2-SOLO-N8 and AP1509-50SG-13-MS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the wes-jiang/PianoPCB repository on GitHub, at the commit this page was made from: the board is PIANO/PIANO.kicad_pcb and its schematic HOPE_template/HOPE_template.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask wes-jiang before reusing the design.