
Dmats hw v1 0
werocketry/airbrakes-SR
A repository for the complete design of an airbrakes system for a sounding rocket.

A repository for the complete design of an airbrakes system for a sounding rocket.
Dmats hw v2 0 is an open-source printed circuit board by werocketry, from the werocketry/airbrakes-SR repository on GitHub. It is a 2-layer board of 66.3 × 2.3 mm with 37 parts on 215 nets, routed with 205 tracks and 27 vias.
It is built around the PSMN1R0-30YLC,115-VB. Its parts include 8 resistors, 7 capacitors, 5 ICs, 4 transistors and 4 switches.
This is the repository for the Western Engineering Rocketry Team's design of an airbrakes system.
| Acronym | Full Name | Description |
|---|---|---|
| AGL | Above Ground Level | |
| COTS | Commercial off-the-shelf | |
| CP | Center of pressure | |
| ESRA | Experimental Sounding Rocket Association | |
| FOS | Factor of Safety | |
| FS | Factor of Safety | |
| IREC | Intercollegiate Rocket Engineering Competition | Basically SAC. It used to happen somewhere else |
| NM | New Mexico | |
| NMSU | New Mexico State University | The university on whose grounds some parts of SAC are held |
| OR | OpenRocket | |
| .ork | OpenRocket filetype | |
| RSO | Range Safety Officer | The person that gives you permission to launch |
| SA | Spaceport America | The launch site where SAC is hosted |
| SAC | Spaceport America Cup | |
| SRAD | Student researched and designed | |
| VLA | Vertical Launch Area | |
| WERT | Western Engineering Rocketry Team | Also called WE Rocketry |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1K | Resistor_SMD:R_0603_1608Metric | R8, R9, R10, R11 |
| 4 | PSMN1R0-30YLC,115 | Package_TO_SOT_SMD:LFPAK56 | Q1, Q2, Q3, Q4 |
| 3 | 3V7 LI-ION | Battery:BatteryHolder_Keystone_1042_1x18650 | BT1, BT2, BT3 |
| 3 | SW_SPDT | DMATS_capstone:CUI_SLW-913535-2A-RA-D_SPDT_Angled | SW2, SW3, SW4 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 50V 220U | Capacitor_SMD:CP_Elec_10x10 | C5, C7 |
| 2 | A1324 | Connector_JST:JST_EH_S3B-EH_1x03_P2.50mm_Horizontal | U2, U3 |
| 2 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1, BZ2 |
| 1 | 100N | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 10U | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 16V 22u | Capacitor_SMD:C_0805_2012Metric | Creg1 |
| 1 | 16V 470n | Capacitor_SMD:C_0805_2012Metric | Cp1 |
| 1 | 50V 10U | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | ABX00042 | DMATS_capstone:MODULE_ABX00042 | U4 |
| 1 | Jumper_2_Open | Resistor_SMD:R_0603_1608Metric | JP1 |
| 1 | Motor_2BitEncoder | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | M1 |
| 1 | SW_SPST | DMATS_capstone:SW_DIP_SPSTx01_Slide_Power | SW1 |
| 1 | ~ | DMATS_capstone:ARDUINO_NICLA | U1 |
| 1 | ~ | Package_DFN_QFN:HVQFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias | U7 |

werocketry/airbrakes-SR
A repository for the complete design of an airbrakes system for a sounding rocket.


hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck

stuartpittaway/diyBMS
Do it yourself battery management system for Lithium ion battery packs/cells

Pwnsat/FlatSat
Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research


vsfteam/vsf
Versaloon Software Framework -- a tiny preemptive-capable event-driven incremental software framework for embedded systems
It measures 66.3 × 2.3 mm and has 2 copper layers, 1.67 mm thick.
37 parts, built around the PSMN1R0-30YLC,115-VB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the werocketry/airbrakes-SR repository on GitHub, at the commit this page was made from: the board is electrical/dmats_hw_v2_0/dmats_hw_v2_0.kicad_pcb and its schematic electrical/dmats_hw_v1_0/A4957_driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask werocketry before reusing the design.