
ImpedanceP1
wenkeli/impedance_meter
Electronics to measure the resistance of multi-channel animal electrodes

Electronics to measure the resistance of multi-channel animal electrodes
ImpedanceP2 is an open-source printed circuit board by wenkeli, from the wenkeli/impedance_meter repository on GitHub. It is a 2-layer board of 98 × 79.6 mm with 73 parts on 60 nets, routed with 471 tracks and 175 vias.
It is built around the MC34063, PCA9306D and DMG2307L-7-F-VB, with the RJ45, B220A and MCP73831 among its other parts. Its parts include 35 resistors, 12 capacitors, 6 ICs, 6 connectors and 3 inductors.
Electronics to measure the resistance of multi-channel animal electrodes
This project uses the Analog Devices AD5934 impedance measurement chip with the STM32 micro-controller to measure 32 channel tetrode channel assemblies, and the ability to pass up to 5uA of current through a 2 MOhm electrode, useful for lesioning the tissue surrounding the electrodes.
The firmware folder contains the STM32 MCU code for controlling the AD5934 chip and defines the user interface on the touch screen.
The hardware folder contains the schematics and PCB designs of the electronics.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 47K | SM0603_Resistor | R4, R5, R10, R11, R20, R21, R22, R23, R24, R25, R34 |
| 11 | 95.3K | SM0603_Resistor | R12, R13, R14, R15, R16, R17, R18, R19, R26, R27, R30 |
| 6 | 4.7uF | SM0603_Capa | C1, C2, C4, C5, C10, C13 |
| 4 | 4.7K | SM0603_Resistor | R28, R29, R32, R33 |
| 4 | Val** | PIN_ARRAY_1 | PIN_ARRAY_1, PIN_ARRAY_1, PIN_ARRAY_1, PIN_ARRAY_1 |
| 3 | 100uF | SM1210 | C6, C8, C9 |
| 3 | LM324QUAD | TSSOP14 | U3, U4, U5 |
| 2 | 100K | SM0603_Resistor | R3, R35 |
| 2 | 10uF | SM0603_Capa | C3, C11 |
| 2 | 33uH | SLF_INDUCTOR | L3, L4 |
| 2 | CONN_24X2 | PIN_ARRAY_24X2 | P2, P3 |
| 2 | DMG2307L-7 | DMG2307L | Q1, Q2 |
| 2 | RJ45 | RJ45_8 | J1, J2 |
| 1 | 0.42 | SM0805 | R6 |
| 1 | 10K | SM0603_Resistor | R8 |
| 1 | 180 | SM0805 | R7 |
| 1 | 200K | SM0603_Resistor | R31 |
| 1 | 2K | SM0603_Resistor | R2 |
| 1 | 300 | SM0603_Resistor | R1 |
| 1 | 300pF | SM0603_Capa | C7 |
| 1 | 4.7uH | SMD_CDR_INDUCTOR | L1 |
| 1 | 71.5K | SM0603_Resistor | R9 |
| 1 | B220A | DO-214AC(SMA) | D3 |
| 1 | ELK-E333FA | ELK_FILTER | FI1 |
| 1 | ISL9111 | SOT23_6 | U2 |
| 1 | JST-PH2 | jst-ph-JST-PH2 | P1 |
| 1 | LED | SM0603 | D1 |
| 1 | MC34063 | SOIC8 | U1 |
| 1 | MCP73831 | SOT23-5 | MCP1 |
| 1 | PCA9306 | SM8 | U6 |
| 1 | SWITCH_INV | EG1224 | SW1 |
| 1 | USB | USB_MINI_B | J3 |

wenkeli/impedance_meter
Electronics to measure the resistance of multi-channel animal electrodes

Anvarys/lightclock
Light Clock A custom PCB-based Clock/Alarm with a runrise alarm, a circle of capacitive touch controls to easily choose the time and a 2.42" OLED display

cnpem-emi/qds-cv-hw
Quench detection system for a single superconducting coil working in the Vertical Cryostat.

GarronAnderson/InsideMyHive-V2
an open-source bee box monitor, now low-power with (hopefully) better code





christopolise/Project_Theseus_API
Contains base hardware schematics and submodule for non-game-logic related code to jtylers/Project_Theseus
It measures 98 × 79.6 mm and has 2 copper layers, 1.6 mm thick.
73 parts, built around the MC34063, PCA9306D, DMG2307L-7-F-VB and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the wenkeli/impedance_meter repository on GitHub, at the commit this page was made from: the board is hardware/impedanceP2/impedanceP2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask wenkeli before reusing the design.