

BMS Sensor
Monorepo for PCB design stuff
- Size
- 80 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 51
- Pads
- 169
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 26 Nov 2024
- Updated
- 23 Sep 2026
Overview
BMS Sensor is an open-source printed circuit board by weaslepalace, from the weaslepalace/boards repository on GitHub. It is a 2-layer board of 80 × 30 mm with 46 parts on 51 nets.
It is built around the ISO1050DUBR, LTV-817S-TA1 and MCP2515T-I/ST-HX, with the REF3040AIDBZR, RC0603FR-0710KL and MA021G00 among its other parts. Its parts include 14 capacitors, 11 resistors, 7 ICs, 6 diodes and 5 connectors. It belongs with the power and sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
9ISO1050DUBR
SOP-8-55℃~+105℃ 1 1Mbps 2500 3V~5.5V 4.75V~5.25V 50kV/us Bus fault detection and protection、Fail-safe SOP-8 Isolated CAN Transceivers ROHSTexas InstrumentsIsolated CAN TransceiversLTV-817S-TA1
SMD-4P-55℃~+110℃ 1 1.2V 100mV@20mA,1mA 200mW 35V 3us 4us 50% 50mA 50mA 5kV 600% 6V DC Phototransistor SMD-4P Transistor, Photovoltaic Output Optoisolators ROHSLite-OnTransistor, Photovoltaic Output OptoisolatorsMCP2515T-I/ST-HX
TSSOP20TSSOP20 CAN Controllers ROHSZHHXDZCAN ControllersREF3040AIDBZR
SOT-23-40℃~+125℃ 128uVrms 25mA 4.096V 4.097V~5.5V 42uA 45uVp-p 75ppm/℃ Fixed Series ±0.2% SOT-23 Voltage Reference ROHSTexas InstrumentsVoltage ReferenceRC0603FR-0710KL
UncategorisedUnknown makerMA021G00
SMD-6P,4.6x3.4mm-40℃~+85℃ 1.2Ω 1.5kV 120uH 1CT:1CT 3.2mm 3.4mm 4.6mm SMD-6P,4.6x3.4mm Pulse Transformers ROHSCND-tekPulse TransformersRC02015
SMD-40℃~+70℃ 1 Gold Non-LED Non-PoE Phosphor bronze RJ45 Jack Surface Mount,Vertical Unshielded SMD Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHSRCHEthernet Connectors / Modular Connectors (RJ45 RJ11)NTCG164KF104FT1
0603-40℃~+125℃ 0.8mm 1.6mm 100kΩ 100mW 100uA 4419K 4468K 4485K 4508K ±1% 0603 NTC Thermistors ROHSTDKNTC ThermistorsNCD0805R1
LED0805-30℃~+85℃ 1.6V~2.6V 130° 195mcd 25mA 615nm~630nm 630nm 65mW Discrete Diode Red 0805 LED Indication - Discrete ROHSFoshan NationStar OptoelectronicsLED Indication - Discrete
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | The_Parts_Library:C_0603 | C103, C104, C105, C106, C107, C108, C112, C113, C114 |
| 5 | 10k | The_Parts_Library:R_0603 | R102, R103, R104, R105, R106 |
| 5 | 1uF | The_Parts_Library:C_0603 | C101, C102, C109, C110, C111 |
| 5 | ~ | the_parts_library:SOD-123FL | D101, D102, D103, D104, D106 |
| 4 | 100 | The_Parts_Library:R_0603 | R101, R107, R110, R111 |
| 2 | ~ | the_parts_library:RCH_RC02015 | J102, J103 |
| 2 | ~ | the_parts_library:M_M3_Lug_Plated | M101, M102 |
| 2 | ~ | the_parts_library:LiteOn_LTV817S_SMD4 | U102, U103 |
| 1 | 100k | the_parts_library:C_0603 | R109 |
| 1 | 422k | the_parts_library:R_0603 | R108 |
| 1 | RED | the_parts_library:LiteOn_LED0805 | D105 |
| 1 | ~ | the_parts_library:Microchip_TSSOP20 | U105 |
| 1 | ~ | The_Parts_Library:Header_1x5 | J101 |
| 1 | ~ | the_parts_library:Tag-Connect_6Pin-No-Legs | J104 |
| 1 | ~ | the_parts_library:TI_SOT_23_3 | U107 |
| 1 | ~ | The_Parts_Library:2059-301_998-403 | J105 |
| 1 | ~ | the_parts_library:Microchip_VQFN20 | U106 |
| 1 | ~ | the_parts_library:T_MA21G00 | T101 |
| 1 | ~ | the_parts_library:TI_SOP8-DUB | U104 |
| 1 | ~ | the_parts_library:Diodes_SOT25 | U101 |
More from weaslepalace/boards
4- 2 layers14 × 9 mm

- 4 layers91.7 × 69.6 mm

- 4 layers26.4 × 37 mm

- 2 layers38.1 × 53.3 mm

Similar boards
- 2 layers135.1 × 159.4 mm

- 2 layers229 × 96 mm

Oscillator Board
Bad-Dog-Designs/ESP32-S3-Synthesizer
Source code and KiCad Files for the build of an ESP32 S3 Based synthesizer. CAN bus is used extensively to collect all the pots and switch data and send to the ESP32 engine
138 parts19 - 4 layers83 × 167 mm

Front rear dual can-2026-11-02 before testpoint swap
johnb302/cmu-embedded
Repo for distributed embedded systems at CMU, 18-449
327 parts - 4 layers118 × 250 mm

- 4 layers129.6 × 45 mm

- 2 layers100 × 100 mm

- 2 layers115.7 × 107.6 mm

- 4 layers100 × 107.7 mm

Questions
How big is the BMS Sensor PCB?
It measures 80 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BMS Sensor use?
46 parts, built around the ISO1050DUBR, LTV-817S-TA1, MCP2515T-I/ST-HX and REF3040AIDBZR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BMS Sensor KiCad files?
From the weaslepalace/boards repository on GitHub, at the commit this page was made from: the board is BMS_Sensor/BMS_Sensor/BMS_Sensor.kicad_pcb and its schematic BMS_Sensor/BMS_Sensor/BMS_Sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BMS Sensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask weaslepalace before reusing the design.