2 layers40 × 30 mm
2 layers36.5 × 22 mm
Basic PCB LED Blinker
WCDianne/Basic-PCB-LED-Blinker- Size
- 36.5 × 22 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 3
- Pads
- 6
- Tracks, vias
- 6, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 6 Jun 2025
- Updated
- 6 Jun 2025
Overview
Basic PCB LED Blinker is an open-source printed circuit board by WCDianne, from the WCDianne/Basic-PCB-LED-Blinker repository on GitHub. It is a 2-layer board of 36.5 × 22 mm with 3 parts on 3 nets, routed with 6 tracks and 0 vias.
Its parts include 1 resistor and 1 diode.
README
README.mdBasic-PCB-LED-Blinker
This is the basic KiCad Project to have a basic knowledge or to familiarized it's interface.
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 220 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R1 |
| 1 | 3W | LED_THT:LED_D5.0mm | D1 |
| 1 | 9V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | BT1 |
Questions
How big is the Basic PCB LED Blinker PCB?
It measures 36.5 × 22 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Basic PCB LED Blinker use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Basic PCB LED Blinker KiCad files?
From the WCDianne/Basic-PCB-LED-Blinker repository on GitHub, at the commit this page was made from: the board is BASIC PCB LED BLINKER .kicad_pcb and its schematic BASIC SCHEMATIC DIAGRAM OF AN LED BLINKER.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Basic PCB LED Blinker design in my own project?
Its repository states no licence, so its author keeps all rights: ask WCDianne before reusing the design.
Similar boards
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
- 2 layers10.5 × 83 mm
- 2 layers21.2 × 51.3 mm
Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT