2 layers104 × 66 mm
LCD DRIVER Rev D
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
146 parts1.5k
2 layers269.1 × 100 mm
Ninja60
wcaokaze/Ninja60- Size
- 269.1 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 146
- Nets
- 105
- Pads
- 660
- Tracks, vias
- 1,082, 101
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 10 Nov 2020
- Updated
- 26 May 2022
Overview
Ninja60 is an open-source printed circuit board by wcaokaze, from the wcaokaze/Ninja60 repository on GitHub. It is a 2-layer board of 269.1 × 100 mm with 146 parts on 105 nets, routed with 1,082 tracks and 101 vias.
Its parts include 66 switches, 64 diodes, 3 connectors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdParts
146| Qty | Value | Footprint | References |
|---|---|---|---|
| 64 | D | kbd:D3_SMD_v2 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +48 |
| 58 | SW_PUSH | kbd:CherryMX_Hotswap | SW10, SW11, SW12, SW13, SW14, SW15, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24, SW25, SW26 +42 |
| 4 | SW_PUSH | kbd:CherryMX_Hotswap_1.5u | SW60, SW61, SW64, SW65 |
| 3 | MJ-4PP-9 | kbd:MJ-4PP-9_1side | J1, J2, J3 |
| 2 | ProMicro | kbd:ProMicro_v3.5 | U1, U2 |
| 2 | Rotary_Encoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mm | SW16, SW30 |
| 2 | SW_PUSH | kbd:ResetSW_1side | SW1, SW2 |
| 1 | Val** | footprint:CherryMX_MidHeight_Choc_Hotswap_2U_Outline | Ref** |
The 136 most common of 146 parts.
Questions
How big is the Ninja60 PCB?
It measures 269.1 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ninja60 use?
146 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ninja60 KiCad files?
From the wcaokaze/Ninja60 repository on GitHub, at the commit this page was made from: the board is kicad/ninja60.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ninja60 design in my own project?
Its repository states no licence, so its author keeps all rights: ask wcaokaze before reusing the design.
Similar boards
- 2 layers58 × 110 mm
- 2 layers65 × 145 mm
Pcb v1 1
EleonoreMizo/pedalevite
Pédale Vite — DIY multi-FX pedalboard for guitar/bass/etc.
146 parts101WTFPL - 2 layers40 × 100 mm
WhiteRabbit
ThisIsNotRocketScience/Eurorack-Modules
This is not Rocket Science presents: Eurorack modular synthesizer modules!
146 parts87MIT - 2 layers103.9 × 43.5 mm
- 2 layers101.6 × 50.8 mm
- 2 layers271.8 × 103.9 mm
- 2 layers128 × 80 mm
