

MCU data logger
4-layer KiCad PCB design of an ATmega328P-AU based microcontroller data logger with dual EEPROMs, RTC, and complete manufacturing-ready Gerber files.
- Size
- 61.7 × 38.7 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 37
- Pads
- 117
- Tracks, vias
- 224, 41
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 28 Jun 2026
- Updated
- 28 Jun 2026
Overview
MCU data logger is an open-source printed circuit board by wazzeemsha, from the wazzeemsha/ATMEGA328P-DataLogger-PCB repository on GitHub. It is a 4-layer board of 61.7 × 38.7 mm with 29 parts on 37 nets, routed with 224 tracks and 41 vias.
It is built around the ATMEGA328P-AN, 24LC1025-I/P and DS1337S+T&R. Its parts include 7 resistors, 5 capacitors, 4 ICs, 4 connectors and 2 diodes. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA328P-AN
TQFP-32(7x7)-40℃~+105℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)24LC1025-I/P
PDIP-8-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 400kHz 5ms Hardware write protection function、Noise suppression function I2C PDIP-8 EEPROM ROHSMicrochip TechnologyEEPROMDS1337S+T&R
SOIC-8-40℃~+85℃ 1.8V~5.5V 100nA 150uA External I2C Programmable clock output、Alarm function Yes SOIC-8 Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time Clocks
README
MCU Data Logger/README.mdATMEGA328P-DataLogger-PCB
4-layer KiCad PCB design of an ATmega328P-AU based microcontroller data logger with dual EEPROMs, RTC, and complete manufacturing-ready Gerber files.
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H2, H3, H4 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R2, R6 |
| 2 | 24LC1025 | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U1, U2 |
| 2 | 330 | Resistor_SMD:R_0805_2012Metric | R5, R7 |
| 2 | 4.7K | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J2 |
| 2 | Crystal | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSoldering | Y1, Y2 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 100 nF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 22pF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 23pF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | ATMEGA328P-AN | ATMEGA328PFOOTPRINT:QFP80P900X900X120-32N | U4 |
| 1 | Battery | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | C | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | Conn_01x09_Pin | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J3 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | DS1337S_ | DS1337S_ (1):SOIC127P600X175-8N | U3 |
Similar boards
- 4 layers51.2 × 34.3 mm

- 2 layers39.8 × 36.2 mm

- 4 layers47.5 × 36.9 mm

- 4 layers50 × 31.5 mm

- 2 layers57.3 × 61 mm

Tobo
eldstal/touchless-xm
Physical buttons for media control on the Sony WH-1000XM2, WH-1000XM3, WH-1000XM4 and possibly WH-1000XM5 wireless headphones
91 parts5 - 2 layers50.2 × 31.2 mm

MCU Datalogger
futureshocked/KLP4e_MCU-Datalogger
This is the repository for the "MCU Datalogger" project.
31 parts138MIT - 2 layers42.7 × 24.4 mm

BACEE
futureshocked/KicadLikeAPro-Project-3-BACEE
This is one of the PCB projects from the Kicad Like a Pro book. It contains a two and four layer board that implements an Arduino clone with external EEPROM and a clock.
20 parts19MIT - 4 layers49.3 × 34.1 mm

Dattalogger Board
DevMajed/DataLogger-Board
Hardware PCB Design for AVR-based Datalogger using KiCAD
30 parts4
Questions
How big is the MCU data logger PCB?
It measures 61.7 × 38.7 mm and has 4 copper layers, 1.6 mm thick.
What parts does the MCU data logger use?
29 parts, built around the ATMEGA328P-AN, 24LC1025-I/P and DS1337S+T&R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MCU data logger KiCad files?
From the wazzeemsha/ATMEGA328P-DataLogger-PCB repository on GitHub, at the commit this page was made from: the board is MCU Data Logger/MCU data logger.kicad_pcb and its schematic MCU Data Logger/MCU data logger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MCU data logger design in my own project?
Its repository states no licence, so its author keeps all rights: ask wazzeemsha before reusing the design.